• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1211-1216
• /
• 2005

Underwater acoustic transducers are widely used for SONAR application, whose important design parameters are shapes. materials, dimensions and supporting structures. Practical design method of transducers consists of manufacturing, experiments and modifications so that it requires much time and expenses. In this study, an analytical method was developed for the Tonpilz type transducers using the commercial finite element analysis code ATILA which can solve the electro-mechanical coupling problems. A finite element model was established including the transducer elements such as ceramic stack, head mass, tail mass, tensile bolt, and molding layers. The proposed model was verified and modified by comparing the in-air and in-water test results of prototypes. The developed analysis method will be effectively used for the sensitivity analysis of design parameters in transducer design process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.282-283
• /
• 2007

압전소자의 초음파 진동을 구동원으로 하는 초음파 모터의 토오크 특성을 개선하기 위하여 양면 Teeth 구조를 가지는 진행파 여진용 고정자를 설계하고, 이를 유한요소해석 프로그램 ATILA-GID를 이용하여 변위분포를 해석하였다. 한 면에만 Teeth 구조를 가지는 기존의 고정자를 이용한 초음파 모터가 소형화, 제한된 토오크 응용분야에 있어서 Direct drive actuation을 위한 발판을 마련해 주었다면, 본 연구에서 제안하는 양면 Teeth 구조의 고정자는 토오크와 효율, 출력특성의 개선과 함께 구조적인 특성에서 기인하는 온도 안정성에 의하여 그 응용분야의 확대를 기대할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.327-327
• /
• 2010

In this paper, an investigation of factors affecting piezoelectric transformers is presented by ATILA software. These transformers are multi-layer piezoelectric transformers in square shape $28\;{\times}\;28\;mm$ and operate in first vibration mode for step-down function. The piezoelectric transformers were modeled in 3D-dimension and analyzed using finite element method in ATILA software, a popular software in piezoelectric analysis. Modal and harmonic modules were used in this process. Effective factors to the properties of piezoelectric transformers including different input electrode patterns, directions of polarization, sizes of connective comer, number of layers were examined on the simulated model using input voltage of 20 V and load resistance of $100\;{\Omega}$. Moreover, thermal analysis was also obtained with conditions of input voltage of 5 V and no-load.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.559-567
• /
• 1999

결합형 유한요소-경계요소 기법을 사용하여 압전체 유연형 쏘나 변환기를 시뮬레이션하였다. 쏘나 변환기의 역학적 구동을 3차원적으로 모델링하였고 전기적 외부 부하 조건을 가지고 분석하였다. 정상 상태 변위 모드, 방향 패턴, 공진 주파수, 대역,0-factor, 출력 압력, TV 응답과 같은 결과들을 보여준다. 본 논문의 술통 형태의 압전 재질 쏘나 변환기는 유연한 변위를 발생시키며, 다른 형태의 쏘나 변환기와 달리 고출력, 낮은 Q-factor, 향상된 전방위성을 가지도록 해준다. 본 연구에서 개발된 쏘나 변환기 모델링의 결과를 ATILA와 같은 상업적 소프트웨어와 비교하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.184-187
• /
• 2000

In this paper, a ring-type ultrasonic motor divided into 12 sectors was modeled by Atila program using finite element method(FEM). The stator consists of a piezoelectric ceramic poled alternately in opposite directions and elastic material. And the stator dimension was $\Phi$40 (outer diameter), $\Phi$ 30(inner diameter), 0.5mm(ceramic thickness) and 3mm(elastic material thickness). As a simulation result, 6$\lambda$ displacement occurred at approximately 52kHz, and this resonance frequency is similar to calculated result 57kHz. The position of maximum displacement was at the edge of stator.

• E2M - 전기 전자와 첨단 소재
• /
• 제18권12호
• /
• pp.18-26
• /
• 2005

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.122.1-125
• /
• 1998

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.49-52
• /
• 2008

In this study, multilayer structured ultrasonic linear motor was simulated using Atila for investigating its optimum driving conditions. The ultrasonic linear motors mainly consist of an ultrasonic vibrator to generate elliptical displacement. The ultrasonic linear motor simulated in this paper was the use of the 1st longitudinal(Ll) and 4th bending vibrations (B4). Whit the increase of the number of piezoelectric actuator layers, displacement of node was increased. Maximum total displacement of node was about $3,91{\mu}m$ at the 13 layered ultrasonic motor under 5 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.215-216
• /
• 2008

Using the extensional vibration mode of PZT ring, a piezopump is successfully made. The PZT ring is polarized with thickness direction. The traveling extensional wave along the circumference of the ring is obtained by dividing two standing waves which are temporally and spatially phase shifted by 90 degrees from each other. The proposed piezopump is consisted of coaxial cylindrical shells that are bonded piezoelectric ceramic ring.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.114-118
• /
• 2013

In this study, coupled mode piezoelectric devices for AE sensor application with excellent displacement and piezoelectric characteristics were simulated using ATILA FEM program, and then fabricated. Displacements and electromechanical coupling factors of the piezoelectric devices were investigated. The simulation results showed that excellent displacement and electromechanical coupling factor were obtained when the ratio of diameter/thickness was 1.0. The piezoelectric device of ${\Phi}/T$= 1.0 exhibited the optimum values of fr= 406 kHz, displacement= $6.11{\times}10^{-8}[m]$, $k_{eff}$= 0.648. The results show that the coupled vibration mode piezoelectric device is a promising candidate for the application of AE sensor piezoelectric device.