• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.120-131
• /
• 1998

This study was performed to define the physicochemical characteristics of food waste and food wastewater, and to find the effect of moisture content variation and salinity variation on aerobic composting for food wastes. In moisture content variation experiment, the samples of 2-1, 2-2, 2-3 and 24 were prepared by the moisture content of 83.8%, 70.9%, 64.8% and 45.1%, respectively. In salinity variation experiment, the samples of 3-1, 3-2, 3-3 and 3-4 were prepared by the salinity of 0.99%, 1. 69%, 1.75% and 2.34%, respectively. In both experiments, aerobic composting reactors were operated by the mode which was composed of half an hour's stirring and 2 hour's aeration per day, for 45 days. The followings are the conclusions that were derived from this study. 1. In the study of physicochemical characteristics of food waste and food wastewater, the values of pH were 4.19 and 3.96, the values of salinity were 0.91% and 1.17%, and the values of conductivity were 7.6 mS/cm and 18.2 mS/cm, respectively. 2. In food waste, the moisture content was 60.3%, organic compound content was 96.1%, total carbon was 48.0%, total nitrogen was 1.5%(therefore, C/N ratio was 32), and the concentration of total phosphorus was 1.34 mg/kg. 3. The time of temperature ascending was delayed, the highest temperature was lowered, the duration period of high temperature was shortened by the increasing of moisture content. In the higher moisture content, anaerobic condition was formed, bad smell was released, insects were gathered and multiplicated, and the reaction rate of composting was reduced. 4. In moisture content experiment, C/N ratios were changed from the range of 31.2-34.8 at the beginning phase to that of 20.4-28.4 at the last phase. 5. In salinity experiment, the reduction rate of volume was increased(40.3%) when the salinity was decreased(0.99%). Also, the reduction rate of mass was increased(51.8%) when the salinity was decreased(0.99%). This fact denotes that salinity hinders the process of composting. 6. the concentrations of total nitrogen and total phosphorus were increased from 0.74% to 1.10%, and from 0.82 mg/kg to 3.44 mg/kg, respectively when the salinity was decreased from 2.34% to 0.99%.

• Journal of the Korean earth science society
• /
• v.24 no.8
• /
• pp.668-683
• /
• 2003

Five species of graptolites belonging to four genera were described from the upper part of the Mungok Formation in the Hwabyung area of Yeongwol, Korea. They are Dendrograptus sp., Callograptus curvithecalis Mu 1955, Adeiograptus tenellus Linnarsson, 1871, Adelograptus sp., and Psigraptus jacksoni Rickards and Stait, 1984. Most of them are reported for the second time in Korea, and the occurrence of Psigraptus is the sixth time ever in the world, following the Yukon Territory of Canada, the Vctoria and Tasmania areas of Australia, and the Jilin and Hebei areas of China. Based on the graptolites, three biozones were recognized from the upper part of the Mungok Formation in the Hwabyung area: the Adelograptus Zone, the Callograptus-Dend개graptus Zone, and the Psigraptus Zone, in ascending order. These graptolite zones are correlated with the La 1.5 Zone (Psigraptus and Clonograptus Zone or Assemblage 3) of Vctoria, Australia, the Psigraptus Zone of the Road River Formation in Yukon, Canada, and the Psigraptus Zone of the Yehli Formation of Hunjiang, Jilin, nonh China. Therefore, according to the graptolites and their biozones, the age of the upper part of the Mungok Formation is assigned to be early Late Tremadoc.

• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.73-91
• /
• 2001

The present study was performed to compare effects of demineralized freeze-dried bone allograft(DFDBA) with deproteinized bovine bone mineral(DBBM) on periodontal fenestration defect in rats. Twelve adult male rats weighing 500 to 540 grams were used in this study. Periodontal fenestration defects were surgically created with tapered fissure bur(${\Phi}1mm$) at the left side of buccal surface of the mandible. The defect size was from anterior border of the first molar to anterior of the ascending ramus mesiodistally and from just below the alveolar crest to apically 1.5-2mm area apicocoronally with 2mm in depth. Rats were divided into control group, test group I and II. Four defects were assigned to the test group I grafted with DBBM and other 4 defects were assigned to the test group II grafted with DFDBA. The rest of defects were the negative control group. At 10 days and 35 days after surgery, 12 rats were sacrificed through intracardiac perfusion and specimens were obtained prepared with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows : 1. In the control group, new bone, osteoid, dense connective tissue were observed in the defects at 10 days. new bone formation was not found but loose connective tissue was formed in the defect and fibrous encapsulation of graft materials was shown in two test groups at 10 days. 2. In all groups, new bone formation was shown in the defect at 35 days. And in the control group, bone formation increased at 35 days than at 10 days. 3. In the test group I and II at 35 days, graft materials were combined with new bone and joined host bone. There was very close contact between new bone, graft materials, and host bone with no gaps. 4. In the test group I and II, new bone formation was similar to that in the control group but not exeeded. In conclusion, in the test group I new bone formation was similar to that in the test group II at 35 days, but there was infiltration of inflammatory cells at 10 days. DFDBA and DBBM were considered as the biocompatible graft materials and effective in the regeneration of new bone.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.329-334
• /
• 2005

The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.

• Journal of the Korean earth science society
• /
• v.34 no.2
• /
• pp.109-119
• /
• 2013

Duibaejae basalts from Goseong, Gangwon-do, are divided into the lower basalt and the upper basalt depending on the properties, such as occurrence, mineral compositions, and major and trace compositions of the basalts. The lower basalts have characteristics of agglomerate rocks as well as contain, crustal and mantle xenoliths, and olivine, pyroxene, and plagioclase xenocrysts. The upper basalts with columnar joints contain relatively more mantle xenolith and olivine xenocryst than the lower basalts. The major and trace element compositions suggest that the composition of the upper basalts is close to primary magma composition. Enrichment and depletion patterns of the trace and the rare-earth elements of the lower basalts are similar to those of the upper basalts, whereas the lower basalts are more LREE enriched than the upper basalts. The source magmas of the lower and upper basalts from Duibaejae volcanic edifice were generated from about 0.8-1.2% and 3.7-4.0% batch melting of garnet peridotite, respectively. The abundance of granite xenolith, and plagioclase and quartz xenocrysts with reaction rim indicates that the lower basalts, compared with upper basalts, might have been assimilated with the crustal materials during ascending to surface.

• Korean journal of applied entomology
• /
• v.34 no.4
• /
• pp.287-294
• /
• 1995

Studies were carried out to elucidate the efficacy of exogeneous 20-hydroxyecdysone treatment on terminating pupal diapause in the fall webworm. Hyphantria cunea Drury. And the difference was also investigated between normal adult development and post-diapause development after 20-hydroxyecdysone treatment. In the diapause termination rate of pupae treated with 20-hydroxyecdysone after storage for various periods at 16L:8D and $25\pm$$1^{\circ}C$, at the highest rate was observed from the group stored for the longest period and the lowest rate from those stored for 1.5 months. The time needed for adult emergence was inversely proportional to the chilling (at $0\pm$$1^{\circ}C$) period, and the longer its exposure period at low temperature, the higher its sensitivity to 20-hydroxyecdysone treatment. Pupal diapause duration was almost the same, regardless of storage period in the total darkness or at the photoperiod of 16L:8D, and also they successfully emerged to adult even without any experience at low temperature. The oxygen consumption rate in normally developing pupae showed nearly a typical U-form. But, that of diapausing pupae treated with 20-hydroxyecdysone slowly increased and jumped 14 days after the treatment. Pupal diapause began before formation of adult tissues, an a timing of adult tissue formation coincided with ascending timing of the metabolic rate in both normally developing pupae and diapausing pupae treated with 20-hydroxyecdysone. The diapausing pupae treated with 20-hydroxyecdysone was similar to normally developing pupae in band patterns of proteins from haemolymph or fat body.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.397-411
• /
• 2004

Purpose: The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-supported overdenture. Material and methods: Maxillary implant -supported overdentures in which 4 implants were placed in the anterior region of edentulous maxilla were fabricated, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional photoelastic stress analysis. Two photoelastic overdenture models were fabricated in each anchorage system to compare with the palatal coverage extent of denture base, as a result we got eight models : Hader bar using clips(type 1), cantilevered Hader bar using clips(type 2), Hader bar using clip and ERA attachments(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4). Result: 1. In all experimental models, the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. In every experimental models with or without palatal coverage of denture base, maximum fringe orders on the distal ipsilateral implant supporting bone in an ascending order is as follows; type 3, type 1, type 4, and type 2. 3. Each implants showed compressive stresses in all experimental models with palatal coverage of denture base, but in the case of those without palatal coverage of denture base, tensile stresses were observed in the distal contralateral implant supporting bone. 4. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant supporting bone on loaded side. 5. The type of anchorage system affected in load transfer more than palatal coverage extent of the denture base. Conclusion: To the results mentioned above, in the case of patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant, and poor bone quality, selecting a resilient type attachment or minimizing the distal cantilevered bar is considered to be an appropriate method to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.2
• /
• pp.238-242
• /
• 2014

Here we described 2 cancer patients treated by acupuncture for abdominal pain as a complication of bowel obstruction. The patient 1, 43-year-old man was treated with surgery, radiotherapy and chemotherapy for rectal cancer. Two years after surgery, he complained of acute abdominal pain due to small bowel adhesion band. Bowel obstruction and symptoms were not improved by conservative therapy like as fasting, keeping Levin tube, and fluid therapy. 4 months later, he could eat a little rice water, but ileus and abdominal pain persisted despite of applying opiod drug and patch. Got started on acupuncture, electroacupuncture(ST-36) and moxa treatment, pain was relived gradually. He could stop opioids 1 month later and ileus was improved after acupuncture therapy for 2 months. The patient 2, 65-year-old woman got hepatectomy, cholecystectomy, and chemotherapy with cholangiocarcinoma. 6 months after surgery, she got laparotomy again for biopsy of new mass around ascending colon. She started eating after gas passing, but felt abdominal distension. Diffuse paralytic ileus was diagnosed by abdominal X-ray, and she got started conservative therapy. During ST-36 electroacupuncture therapy, symptoms like abdominal pain and distension were improved and could stop opiod patch. But eating aggravated ileus again and clinical finding of mechanical bowel obstruction was appeared. Based on these cases, acupuncture and moxa therapy could be helpful for improving abdominal pain and ileus, but possibility of malignant bowel obstruction should be considered especially in cancer patients.

• Therapeutic Science for Rehabilitation
• /
• v.4 no.2
• /
• pp.73-83
• /
• 2015

Objective: The purpose of this study was to examine the effect of the Spaced Retrieval Training (SRT) with Errorless learning on the elderly with Mild Cognitive Impairment (MCI)'s memory, Instrumental Activities Daily Living, Depression symptom. Methods: A single subject experimental research with ABA design was conducted in this study on the 78-years-old person who was enrolled in day-care center. The total experimental sessions were 16 which composed of 3 sessions for baseline, 10 sessions for intervention and 3 sessions for second baseline. K-Auditory Verbal Learning Test (K-AVLT) was measured for the memory each session. For the measurement of cognitive function, IADL, depression Symptom, Korean version of Montreal Cognitive Assessment (MoCA-K), Philadelphia Geriatric Center Instrumental Activities Daily Living (PGC IADL), Geriatric Depression Scale Korean Version (GDS-K) was measured at pre-post test. Results: Memory at the phase B was improved than Phase A. At the phase B, the scores trend was ascending, but after the intervention at the phase A', the scores trend was descending. The scores of MoCA-K were improved, PGC IADL were maintained, GDS-K were decreased. Conclusion: This results support the evidence of the SRT with EL on the elderly with MCI in the clinical setting. In the future, the correlation researches about MCI's memory and other functional factors will be needed for effective occupational therapy service.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.138-150
• /
• 1997

The late Quaternary stratigraphy of the tidal deposits in the Hampyung Bay, southwestern coast of Korea comprises 1) Unit III (nonmarine fluvial coarse-grained sediments), 2) Unit II (late Pleistocene tidal deposits), and 3) Unit I (late Holocene fine-grained tidal deposits) in ascending order. The basements of the Hampyung Bay is composed of granitic rocks and basic dyke rocks. These three units are of unconformally bounded sedimentary sequences. The sequence boundary between Unit I and Unit II, in particular, seems to be significant suggesting erosional surface and exposed to the air under the cold climate during the LGM. The uppermost stratigraphic sequence (Unit I) is a common tidal deposit formed under the transgression to highstand sea-level during the middle to late Holocene.