• 한국구조물진단유지관리공학회 논문집
• /
• 제26권2호
• /
• pp.43-50
• /
• 2022

설계단계에서 구조적 안전성을 확인하더라도, 시공단계에서는 구조시스템이 완전히 형성되지 않아 구조적 안전성이 보장되지 않는다. 또한 시공 기간은 완공된 이후의 건물의 사용기간보다 짧기 때문에 설계단계에서와 같은 지진하중을 시공단계에 적용하는 것은 과다하다. ASCE 37-14는 시공 중 지진하중 저감계수의 개념을 제시하고 있지만, 명확한 적용 방법을 제공하지 않고 있다. 따라서, 이 연구에서는 재현주기에 따라 저감한 지진하중을 주거용 중층 RC건물의 예제 모델에 적용하였다. 예제모델의 시공단계를 5층 단위로 구분하였으며, 시공단계 모델들에 재현주기 변화에 따른 지진하중을 적용하여 시공 중 지진하중을 분석하고 구조 부재의 단면성능 검토를 수행하였다. 설계단계와 시공단계에서의 전단벽 설계강도비를 비교하여, 주거용 중층 RC 건물의 시공 중 안전성을 확보할 수 있는 지진하중 크기의 범위를 재현주기의 관점에서 분석하였다.

• 대한토목학회논문집
• /
• 제30권2B호
• /
• pp.219-231
• /
• 2010

Reference Evapotranspiration Calculator Software (REF-ET)는 ASCE 및 FAO 기준증발산량을 포함한 총 17개의 FAO Penman-Monteith (PM) 방정식의 연산을 동시에 수행할 수 있는 프로그램으로서, 본 연구에서는 REF-ET에 대한 상세한 소개와 함께 기상관측소의 관측자료를 이용하여 REF-ET의 효용성을 논하였다. REF-ET는 각종 PM 방정식들에 대한 시일 월 단위 모의와 지역적 특성의 반영 및 결측자료에 대한 보정 등이 가능하다. REF-ET를 이용하여 서울 기상관측소의 29년간 증발산량을 모의한 결과, 일복사량에 주로 좌우되는 FAO24-Rd 식과 1957-Makk 식의 상관계수가 각각 0.89와 0.88로 높게 나타났으며, 이는 소형증발접시를 이용한 기준증발산량 관측값이 공기 동력학적 증발량만을 주로 반영하기 때문인 것으로 사료된다. 또한 RMSE/bias 분석을 통해 기준증발산 방정식들에 의한 계산값이 증발접시로부터의 기준증발산량에 비해 다소 과대평가되는 현상을 나타내었으나, 이 경우에도 1957-Makk 식이 가장 정확한 것으로 나타났다. 일단위 시계열 분석시 1957-Makk 식은 여름철의 증발산량을 저평가하는 경향을 나타내었으나, 전체적으로 1.06 mm/day의 오차로 증발산량을 모의 가능하였다. 차후 기상관측자료의 정확도를 높이는 연구들과 REF-ET를 병행한다면, 해당 지역 및 기간에 대한 증발산량 모의 및 관련 특성인자를 파악하는 연구에 활용도가 높을 것으로 기대된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.88-96
• /
• 1995

Seismic design provisions in Korea has developed based on seismic provisions in United States (e.g., ATC 3-06). Current seismic design provisions in U .S. is moving toward adopting enhanced concept for design. Federal Emergence Management Agency (FEMA) Provides the NEHRP recommended Provisions for the Development of Seismic Regulations for New Buildings which can be used as a source document for use by any interested members of the building community. Current seismic design provisions in U .S. generally use a uni-level force. These provisions can not be satisfied if the limit state design is concerned. Limit state can be defined as a state causing undesirable performance o( a structure (e .g., serviceability, ultimate, buckling, etc.). Even if there are provision for controlling drift by two levels, it is still difficult to satisfy limit states using uni-level force. Architectural Institute of Japan (AIJ) uses a hi-level forces Int seismic loadings which can satisfy serviceability and ultimate limit state. However, the seismic parameters used in AIJ guideline are basically determined by subjective manner of code committee member and professions. These parameters need to be determined based on target quantities (target reliability, target energy dissipation, target displacement, target stress level, etc.). This study develops the method to determine the sesmic design parameters based on a certain taget level. Reliability is used as a target level and load factors in ANSI/ASCE 7-88 are selected as design parameters to be determined.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.443-450
• /
• 2002

본 논문에서는 미국토목학회(ASCE)의 사장교에 대한 첫번째 벤치마크 문제를 이용하여 제어-구조물 상호작용을 고려한 새로운 반능동 제어 기법을 제안하였다. 이 벤치마크 문제에서는 2003년 완공 예정으로 미국 Missouri 주에 건설 중인 Cape Girardeau 교를 대상 구조물로 고려하였다. Cape Girardeau 교는 New Madrid 지진구역에 위치하고, Mississippi 강을 횡단하는 주요 교량이라는 점 때문에 설계단계에서부터 내진 문제에 대하여 자세하게 고려되었다. 상세 설계 도면을 기반으로 하여 교량의 전체적인 거동 특성을 정확하게 나타낼 수 있는 3차원 모델이 만들어졌고, 사장교의 제어 성능에 관련된 평가 기준이 수립되었다. 본 연구에서는 제어 가능한 유체 감쇠기에 속하는 MR 유체 감쇠기를 제어 장치로 제안하였고, 기존 연구에서 MR 유체 감쇠기를 포함한 구조물의 제어에 효율적이라고 검증된 clipped-optimal 알고리듬을 제어 알고리듬으로 사용하였다. 또한, 실제 규모의 MR 유체 감쇠기 실험 결과를 이용하여 수치해석에 이용할 수 있는 동적 모델을 개발하였다. MR 유체 감쇠기는 제어 가능한 에너지 소산장치이며 구조물에 에너지를 가하지 않기 때문에 제안된 제어 기법은 한정입출력 안정성이 보장된다. 수치해석을 통해, MR 유체 감쇠기를 이용한 반능동 제어 기법이 사장교의 응답 감소에 효과적인 방법임을 증명하였다.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.825-835
• /
• 2017

Significant improvements to methodologies on structural damage detection (SDD) have emerged in recent years. However, many methods are related to inversion computation which is prone to be ill-posed or ill-conditioning, leading to low-computing efficiency or inaccurate results. To explore a more accurate solution with satisfactory efficiency, a PSO-INM algorithm, combining particle swarm optimization (PSO) algorithm and an improved Nelder-Mead method (INM), is proposed to solve multi-sample objective function defined based on Bayesian inference in this study. The PSO-based algorithm, as a heuristic algorithm, is reliable to explore solution to SDD problem converted into a constrained optimization problem in mathematics. And the multi-sample objective function provides a stable pattern under different level of noise. Advantages of multi-sample objective function and its superior over traditional objective function are studied. Numerical simulation results of a two-storey frame structure show that the proposed method is sensitive to multi-damage cases. For further confirming accuracy of the proposed method, the ASCE 4-storey benchmark frame structure subjected to single and multiple damage cases is employed. Different kinds of modal identification methods are utilized to extract structural modal data from noise-contaminating acceleration responses. The illustrated results show that the proposed method is efficient to exact locations and extents of induced damages in structures.

• 국제초고층학회논문집
• /
• 제4권1호
• /
• pp.1-8
• /
• 2015

A team of researchers and practitioners were recently assembled to prepare a monograph on "Wind-Induced Motion of Tall Buildings: Designing for Habitability". This monograph presents a state-of-the-art report of occupant response to wind-induced building motion and acceptability criteria for wind-excited tall buildings. It provides background information on a range of pertinent subjects, including: ${\bullet}$ Physiological, psychological and behavioural traits of occupant response to wind-induced building motion; ${\bullet}$ A summary of investigations and findings of human response to real and simulated building motions based on field studies and motion simulator experiments; ${\bullet}$ A review of serviceability criteria to assess the acceptability of wind-induced building motion adopted by international and country-based standards organizations; ${\bullet}$ General acceptance guidelines of occupant response to wind-induced building motion based on peak acceleration thresholds; and ${\bullet}$ Mitigation strategies to reduce wind-induced building motion through structural optimization, aerodynamic treatment and vibration dissipation/absorption. This monograph is to be published by the American Society of Civil Engineers (ASCE) and equips building owners and tall building design professionals with a better understanding of the complex nature of occupant response to and acceptability of wind-induced building motion. This paper is a brief summary of the works reported in the monograph.

• International Journal of Concrete Structures and Materials
• /
• 제4권1호
• /
• pp.9-15
• /
• 2010

Silica fume is a common addition to high performance concrete mix designs. The use of silica fume in concrete leads to increased water demand. For this reason, Florida Department of Transportation (FDOT) allows only a 72-hour continuous moist cure process for concrete containing silica fume. Accelerated curing has been shown to be effective in producing high-performance characteristics at early ages in silica-fume concrete. However, the heat greatly increases the moisture loss from exposed surfaces, which may cause shrinkage problems. An experimental study was undertaken to determine the feasibility of steam curing of FDOT concrete with silica fume in order to reduce precast turnaround time. Various steam curing durations were utilized with full-scale precast prestressed pile specimens. The concrete compressive strength and shrinkage were determined for various durations of steam curing. Results indicate that steam cured silica fume concrete met all FDOT requirements for the 12, 18 and 24 hours of curing periods. No shrinkage cracking was observed in any samples up to one year age. It was recommended that FDOT allow the 12 hour steam curing for concrete with silica fume.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.144-152
• /
• 2013

PRT(Personal Rapid Transit) system is a new transportation system which will meet increasing demands of traffic in Korea. It is also an environment-friendly transportation and automatically operated. For these reasons, researches on the PRT system are actively undergoing, but the PRT vehicles have different forms of subway, bus, etc. There are no design standards to evaluate structural integrity, yet. In this paper, Structural design specifications are derived, which are based on the performance test standard for EMU and the ASCE-APM standards. We also perform the static and fatigue analyses by FE simulation and suggest strategies to improve an initial structure design. In addition, we derived the design specifications for energy-absorbing structures to meet the conditions of the collision scenarios predefined from a view point of operation safety.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2002년도 학술발표회 논문집(I)
• /
• pp.3-16
• /
• 2002

This article describes some of the recent and on-going research developments of the author at Colorado State University. Advances in the field of sedimentation and river mechanics include basic research and computer modeling on several topics. Only a few selected topics are considered here: (1) analytical determination of velocity profiles, shear stress and sediment concentration profiles in smooth open channels; (2) experiments on bedload particle velocity in smooth and rough channels; (3) field measurements of sediment transport by size fractions in curved flumes. In terms of computer modeling, significant advances have been achieved in: (1) flashflood simulation with raster-based GIOS and radar precipitation data; and (2) physically-based computer modeling of sediment transport at the watershed scale with CASC2D-SED. Field applications, measurements and analysis of hydraulic geometry and sediment transport has been applied to: (1) gravel-bed transport measurements in a cobble-bed stream at Little Granite Creek, Wyoming; (2) sand and gravel transport by size fraction in the sharp meander bends of Fall River, Colorado; (3) changes in sand dune geometry and resistance to flow during major floods of the Rhine River in the Netherlands; (4) changes in hydraulic geometry of the Rio Grande downstream of Cochiti Dam, New Mexico; and (5) analysis of the influence of water temperature and the Coriolis force on flow velocity and sediment transport of the Lower Mississippi River in Louisiana. Recent developments also include two textbooks on "Erosion and Sedimentation" and "River Mechanics" by the author and state-of-the-art papers in the ASCE Journal of Hydraulic Engineering.

• Wind and Structures
• /
• 제9권3호
• /
• pp.217-230
• /
• 2006

This paper describes a procedure to develop fragility curves for woodframe structures subjected to lateral wind loads. The fragilities are cast in terms of horizontal displacement criteria (maximum drift at the top of the shearwalls). The procedure is illustrated through the development of fragility curves for one and two-story residential woodframe buildings in high wind regions. The structures were analyzed using a monotonic pushover analysis to develop the relationship between displacement and base shear. The base shear values were then transformed to equivalent nominal wind speeds using information on the geometry of the baseline buildings and the wind load equations (and associated parameters) in ASCE 7-02. Displacement vs. equivalent nominal wind speed curves were used to determine the critical wind direction, and Monte Carlo simulation was used along with wind load parameter statistics provided by Ellingwood and Tekie (1999) to construct displacement vs. wind speed curves. Wind speeds corresponding to a presumed limit displacement were used to construct fragility curves. Since the fragilities were fit well using a lognormal CDF and had similar logarithmic standard deviations (${\xi}$), a quick analysis to develop approximate fragilities is possible, and this also is illustrated. Finally, a compound fragility curve, defined as a weighted combination of individual fragilities, is developed.