• 한국안전학회지
• /
• 제11권2호
• /
• pp.60-66
• /
• 1996

In order to look into the internal structure and electrical properties of insulating Silicone rubbers added reinforcing fillers ; Silica(0-140 phr ), and to examine the behavior of charged particles, and the properties of thermally stimulated current (TSC) are investigated, respectively. From the TSC which are formed by applying the electric field of 2~5 ㎸/mm to specimen at temperature range from -150 to $270^{\circ}C$, the results arp as following. In the case of non-filled specimen, four peaks of $\delta$, $\gamma$ , $\beta$ and u are obtained at the temperature of $-120^{\circ}C$, $-60^{\circ}C$, $20^{\circ}C$ and $130^{\circ}C$, respectively and the case of filled specimen, three peaks of $\delta$, ${\alpha}_2$ and ${\alpha}_1$ are observed at the temperature of of $-120^{\circ}C$, $80^{\circ}C$ and $130^{\circ}C$, respectively. The origins of these peaks are that, the $\delta$ peak seems to the result from the contribution of side chain methyl radical, and the $\beta$ peak from the depolarization of space charge polarization owing to added imputity during during manufacturing specimens, and the $\beta$ peak from the orientation of $Si-CH_3$dipole, and the ${\alpha}_2$ near the temperature of $130^{\circ}C$ from carboxyl acid that is formed by the thermal oxidation of high temperature.

• 대한한방내과학회지
• /
• 제25권4호
• /
• pp.274-288
• /
• 2004

Objectives : This study was designed to evaluate the effect on cytotoxicity of Bojungikki-tang(BIT) in human lung cancer H460 cells. Methods : BIT-induced cell death was confirmed as apoptosis characterized by chromatin condensation and increase of the $sub-G_1$, DNA content. It was tested whether the water extract of BIT affects the cell cycle regulators such as, p2l/Cipl, p27/Kipl, cyclin $B_1$. Results : The data showed that treatment of BIT decreased the viability of H460 cells in a dose-dependent manner. p2l/Cip1 is gradually decreased by the addition of the cells with BIT extract. Interestingly, p27/Kip1 is not detected for 24 hr after the addition of BIT extract, however, after 24 hr, p27/Kipl markedly increased. In addition, cyclin $B_1$, decreased in a time dependent manner after the addition of the water extract. The activation of caspase -3 protease was further confirmed by degradation of procaspase-8 protease andpoly(ADP-ribose) polymerase(P ARP) by BIT in H460 cells. Moreover, BIT induced the increase of Bak expression. Conclusion : These results suggest that the extract of BIT exerts anticancer effects to induce the death of human lung cancer H460 cells via down regulation of cell cycle regulators such as p2l/Cip1, and cyclin B1 or up regulation of cell cycle regulators such as p27/Kip1. Moerover results suggest that BIT induces an apoptosis in H460 cells via activation of intrinsic caspase cascades.

• Fisheries and Aquatic Sciences
• /
• 제22권12호
• /
• pp.28.1-28.8
• /
• 2019

Background: In the present study, we evaluated four commonly used housekeeping genes, viz., actin-β, elongation factor-1α (EF1α), acidic ribosomal protein (ARP), and glyceraldehyde 3-phosphate dehydrogenase (GAPDH) as internal references for quantitative analysis of immune genes in nervous necrosis virus (NNV)-infected seven-band grouper, Hyporthodus septemfasciatus. Methods: Expression profiles of the four genes were estimated in 12 tissues of healthy and infected seven-band grouper. Expression stability of the genes was calculated using the delta Ct method, BestKeeper, NormFinder, and geNorm algorithms. Consensus ranking was performed using RefFinder, and statistical analysis was done using GraphpadPrism 5.0. Results: Tissue-specific variations were observed in the four tested housekeeping genes of healthy and NNV-infected seven-band grouper. Fold change calculation for interferon-1 and Mx expression using the four housekeeping genes as internal references presented varied profiles for each tissue. EF1α and actin-β was the most stable expressed gene in tissues of healthy and NNV-infected seven-band grouper, respectively. Consensus ranking using RefFinder suggested EF1α as the least variable and highly stable gene in the healthy and infected animals. Conclusions: These results suggest that EF1α can be a fairly better internal reference in comparison to other tested genes in this study during the NNV infection process. This forms the pilot study on the validation of reference genes in Hyporthodus septemfasciatus, in the context of NNV infection.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권3호
• /
• pp.991-994
• /
• 2012

Objective: VEGF-C has recently been identified as a key molecule which is involved in tumor lymphangiogenesis. The aim of this research was to investigate the role of PARP-1 inhibition in the regulation of VEGF-C expression in CT26 cells. Methods: CT26 cells were treated with or without the PARP-1 inhibitor 5-aminoisoquinolinone (5-AIQ). The expression of PARP-1, NF-kB, and VEGF-C proteins in CT26 cells was measured by Western blot analysis and the VEGF-C mRNA level was determined by reverse transcription polymerase chain reaction (RT-PCR). CT26-secreted VEGF-C was detected by enzyme-linked immunosorbent assay (ELISA). Results: The results of Western blot analysis showed that the expression levels of PARP-1, NF-kB, and VEGF-C were reduced in 5-AIQ treated CT26 cells and the levels of VEGF-C mRNA in 5-AIQ treated CT26 were significantly lower than t in 5-AIQ-untreated cells (P<0.05). The concentrations of CT26-secreted VEGF-C were also dramatically decreased (P<0.05). Conclusion: Here, we provide evidence for the first time that PARP-1 inhibition dramatically reduces VEGF-C expression via the nuclear factor NF-kB signaling pathway. We therefore propose that PARP-1 inhibition has an anti-lymphangiogenic effect and may contribute to the prevention of metastatic dissemination via the lymphatic system.

• Journal of Radiation Protection and Research
• /
• 제39권4호
• /
• pp.176-181
• /
• 2014

The object of this paper is to evaluate the fission product inventories and radiological doses in a non-LOCA event, based on the U.S. NRC's regulatory methodologies recommended by the TID-14844 and the RG 1.195. For choosing a non-LOCA event, one fuel assembly was assumed to be melted by a channel blockage accident. The Hanul nuclear power reactor unit 6 and the CE $16{\times}16$ fuel assembly were selected as the computational models. The burnup cross section library for depletion calculations was produced using the TRITON module in the SCALE6.1 computer code system. Based on the recently licensed values for fuel enrichment and burnup, the source term calculation was performed using the ORIGEN-ARP module. The fission product inventories released into the environment were obtained with the assumptions of the TID-14844 and the RG 1.195. With two kinds of source terms, the radiological doses of public in normal environment reflecting realistic circumstances were evaluated by applying the average condition of meteorology, inhalation rate, and shielding factor. The statistical analysis was first carried out using consecutive three year-meteorological data measured at the Hanul site. The annual-averaged atmospheric dispersion factors were evaluated at the shortest representative distance of 1,000 m, where the residents are actually able to live from the reactor core, according to the methodology recommended by the RG 1.111. The Korean characteristic-inhalation rate and shielding factor of a building were considered for a series of dose calculations.

• 방사성폐기물학회지
• /
• 제17권4호
• /
• pp.375-387
• /
• 2019

본 연구에서는 최근 개발중인 360 다발 장전용량의 중수로 사용후핵연료 운반용기에 대한 설계기준연료의 방사선원항 평가와 용기외부에서의 방사선량률 계산을 수행하였다. 그리고 국·내외 방사선적 안전성평가와 관련한 기술기준 부합여부를 판단하고 결과의 적합성을 제시하였다. 방사선원항으로 작용하는 설계기준연료 선정을 위해 월성원전에서 운영중인 운반 용기 및 두 가지 방식의 건식저장시설에 적용된 설계기준연료의 사양 및 특성을 조사하였다. 각 운반·저장 시스템 별 설계 기준연료의 연소도, 최소 냉각기간 및 중간저장시설로의 운반시점 등을 바탕으로 연소도 7,800 MWD/MTU와 최소 냉각기간 6년을 설계기준연료로 설정하였다. 설계기준연료의 방사선원항은 SCALE 전산코드의 ORIGEN-ARP모듈을 이용하여 평가하였다. 운반용기의 방사선차폐평가는 MCNP6 전산코드를 이용하였으며, 기술기준에서 요구하는 운반용기 외부에서의 방사선량률 평가를 정상 및 사고조건으로 구분하여 수행하였다. 방사선량률 평가결과, 정상운반조건의 운반용기 표면 및 운반용기 표면 2 m 이격지점에서 계산된 최대 방사선량률은 각각 0.330 mSv·h^-1와 0.065 mSv·h^-1로 도출되어 선량률 제한치인 2.0 mSv·h^-1와 0.1 mSv·h^-1를 모두 만족하는 결과를 도출하였다. 또한 운반사고조건하 운반용기 표면 1 m 지점에서의 최대 방사선량률은 0.321 mSv·h^-1로서 기술기준인 10.0 mSv·h^-1 미만으로 평가되어, 대용량 중수로 사용후핵연료 운반용기는 방사선적 안전성을 확보하는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제37권1호
• /
• pp.91-100
• /
• 2005

Kyung-hee Thorium Fuel (KTF), a heterogeneous thorium-based seed and blanket design concept for pressurized light water reactors, is being studied as an alternative to enhance proliferation resistance and fuel cycle economics of PWRs. The proliferation resistance characteristics of the KTF assembly design were evaluated through parametric studies using neutronic performance indices such as Bare Critical Mass (BCM), Spontaneous Neutron Source rate (SNS), Thermal Generation rate (TG), and Radio-Toxicity. Also, Fissile Economic Index (FEI), a new index for gauging fuel cycle economy, was suggested and applied to optimize the KTF design. A core loaded with optimized KTF assemblies with a seed-to-blanket ratio of 1: 1 was tested at the Korea Next Generation Reactor (KNGR), ARP-1400. Core design characteristics for cycle length, power distribution, and power peaking were evaluated by HELIOS and MASTER code systems for nine reload cycles. The core calculation results show that the KTF assembly design has nearly the same neutronic performance as those of a conventional $UO_2$ fuel assembly. However, the power peaking factor is relatively higher than that of conventional PWRs as the maximum Fq is 2.69 at the M$9^{th}$ equilibrium cycle while the design limit is 2.58. In order to assess the economic potential of a heterogeneous thorium fuel core, the front-end fuel cycle costs as well as the spent fuel disposal costs were compared with those of a reference PWR fueled with $UO_2$. In the case of comprising back-end fuel cycle cost, the fuel cycle cost of APR-1400 with a KTF assembly is 4.99 mills/KWe-yr, which is lower than that (5.23 mills/KWe-yr) of a conventional PWR. Proliferation resistance potential, BCM, SNS, and TG of a heterogeneous thorium-fueled core are much higher than those of the $UO_2$ core. The once-through fuel cycle application of heterogeneous thorium fuel assemblies demonstrated good competitiveness relative to $UO_2$ in terms of economics.

• 한국해안해양공학회지
• /
• 제6권3호
• /
• pp.205-215
• /
• 1994

난류모형을 도입하여 풍성류에 대한 3차원 수치모형을 수립하고, 풍성류 계산에 있어서 연직 와점성계수 산정방법들에 대한 비교평가를 수행하였다. 검토된 방법은 함수형(0-방정식), 1-방정식, 2개의 2-방정식 난류모형($ extsc{k}$-$\varepsilon$과 $textsc{k}$-ι)이며, 난류모형은 난류확산 특성길이의 연직분포에 대한 비교를 통하여 각 방법의 특징이 검토되었다. 양단이 막힌 수로와 순환수로에서 유속의 연직분포 계산결과를 수리실험자료와 비교검증하였다. 분석결과에 의하면 1-방정식 난류모형에 적합한 난류확산 특성길이 산정식은 포물선형이었으며, 2-방정식 난류모형($textsc{k}$-ι 모형과 $textsc{k}$-$\varepsilon$모형)은 대체로 실험치와 일치하는 경향을 보였다. 바람에 의한 영향이 전수심에 미치지 않는 경우에 가정된 연직 와점성계수의 분포는 바람이 영향을 미치는 수심까지만 적용되며, 영향이 없는 수심에서는 연직확산이 거의 일어나지 않아 적정성계수의 크기가 0에 가까웠다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.

• 한국압력기기공학회 논문집
• /
• 제20권1호
• /
• pp.25-31
• /
• 2024

The core shroud of rector vessel internals (RVI) of OPR1000 and ARP1400 is made of Type 304 stainless steel (SS) by bending and welding process that may induce high deformation and residual stress in manufacturing. This work aims to evaluate the susceptibility of stress corrosion crack (SCC) initiation of bent parts of RVI in high temperature primary water environment. For SCC initiation test, tensile specimens were fabricated from the 90 degree bent plate of Type 304 SS (DT specimen), that is an archived part of a Korean APR1400. After the SCC initiation test, the specimen surface was thoroughly examined by optical and scanning electron microscopy, and compared to the specimen fabricated from the as-received plate of Type 304 SS (AR specimen). The surface observation revealed that SCC initiated on the AR specimen surface in typical intergranular (IG) mode, while SCC on the DT specimen occurred in transgrannular mode as well as IG mode. It was also found that the size and number of SCC on the DT specimen were larger than that on the AR specimen. This was attributable to a strain-hardening during the bending process. To compare the susceptibility of SCC initiation, total crack density (TCD) was calculated from the total crack length divided by the measured area of AR and DT specimens. TCD of DT specimen was 4.6 times higher than AR specimen in average, indicating that higher possibility of degradation of bent parts of RVI for a long-term operation.