• Magazine of the Korea Concrete Institute
• /
• v.8 no.1
• /
• pp.138-144
• /
• 1996

At present, waterproof is absolutely needed to minimize the carbonation of bridge decks in Kor ea. In this research indoor experiments for penetrative waterproof admixture out of available methods are carried out to evaluate the resisting characteristics against natural arid artificial car bona ting conditions. The test results show that the optimal time of waterproof is 14 days after the concrete construc. tion but reconsideration is necessary for the application to high strength concrete because of the reduction in penetration of waterproof admixture. The results also show that the penetrat ive waterproof admixture has srrong resistance to the acid rain. However the waterproof capability of the admixture is not permanent especially under the natural exposure. Therefore the slab of a bridge should be paved with asphalt concrete. Other noticeable effects are the increase of heat and abrasion resistances from the use of the waterproof agents.

• Nutritional Sciences
• /
• v.1 no.1
• /
• pp.8-15
• /
• 1998

In order to independently examine the effects of long-chain saturated fatty acids and dietary cholesterol levels on plasma and hepatic cholesterol concentrations, six different diets were fed to male Mongolian gerbils (14 gerbils pes grcup) for an 8-week period. Purified diets contained 36% energy as fat (each saturated fatty acid tested comprised about 20% of the total fat energy) and 0.06% (w/w) cholesterol, corresponding to typical human consumption patterns in Western diets. Fat blends were formulated with natural fat sources. To determine the effects of different saturated fatty acids on plasma and liver cholesterol levels, four of the six diets contained constant levels of all nutrients except for the amounts of lauric acid (12 0), myristic acid (14 : 0), palmitic acid (16 0), and stearic acid (18 : 0). Dietary cholesterol effects were tested using 16 : 0-enriched diets containing 0, 0.006, and 0.06% (w/w) cholesterol. None of the plasma lipids were influenced by fatty acid treatment, including triglycerides, plasma total-, VLDL+LDL-, and HDL-cholesterol. However, hepatic esterified cholesterol concentrations were increased in the palmitic and stearic arid diet groups compared to the lauric and myristic acid diet group. The molar ratios of hepatic EC/FC were the highest in the palmitic acid diet (12.2 $\pm$0.6) and the lowest in the myristic acid diet (6.4$\pm$0.2). Dietary cholesterol significantly (p<0.001) increased the plasma total cholesterol which was due to the increase of both HDL-and VLDL+LDL-cholesterol. In the absence of dietary cholesterol and compared to other species, the gerbil exhibited a high molar ratio of hepatic EC/FC, which was funker elevated by dietary cholesterol feeding (0.06%). The results from this study indicate that hepatic cholesterol concentrations are sensitive to both low levels of dietary cholesterol and saturated fatty acid chain length and also, that plasma cholesterol concentrations are sensitive to low levels of dietary cholesterol .

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.10-17
• /
• 2013

History of Instream Flow Incremental Methodology (IFIM) Following the large reservoir and water development era of the mid-twentieth century in North America, resource agencies became concerned over the loss of many miles of riverine fish and wildlife resources in the arid western United States. Consequently, several western states began issuing rules for protecting existing stream resources from future depletions caused by accelerated water development. Many assessment methods appeared during the 1960's and early 1970's. These techniques were based on hydrologic analysis of the water supply and hydraulic considerations of critical stream channel segments, coupled with empirical observations of habitat quality and an understanding of riverine fish ecology. Following enactment of the National Environmental Policy Act (NEPA) of 1970, attention was shifted from minimum flows to the evaluation of alternative designs and operations of federally funded water projects. Methods capable of quantifying the effect of incremental changes in stream flow to evaluate a series of possible alternative development schemes were needed. This need led to the development of habitat versus discharge functions developed from life stage-specific relations for selected species, that is, fish passage, spawning, and rearing habitat versus flow for trout or salmon. During the late 1970's and early 1980's, an era of small hydropower development began. Hundreds of proposed hydropower sites in the Pacific Northwest and New England regions of the United States came under intensive examination by state and federal fishery management interests. During this transition period from evaluating large federal reservoirs to evaluating license applications for small hydropower, the Instream Flow Incremental Methodology (IFIM) was developed under the guidance of the U.S. Fish and Wildlife Service (USFWS).

• Journal of Powder Materials
• /
• v.13 no.1 s.54
• /
• pp.18-24
• /
• 2006

The brazing adhesion properties of Ag coated W-Ag electric contact on the Cu substrate have been investigated in therms of microstructure, phase equilibrium and adhesion strength. Precoating of Ag layer ($3{\mu}m$ in thickness) on the $W-40\%Ag$ contact material was done by electro-plating method. Subsequently the brazing treatment was conducted by inserting BCuP-5 filler metal (Ag-Cu-P alloy) layer between Ag coated W-Ag and Cu substrate and annealing at $710^{\circ}C$ in $H_2$ atmosphere. The optimum brazing temperature of $710^{\circ}C$ was semi-empirically calculated on the basis of the Cu atomic diffusion profile in Ag layer of commercial electric contact produced by the same brazing process. As a mechanical test of the electric contact after brazing treatment the adhesion strength between the electric contact and Cu substrate was measured using Instron. The microstructure and phase equilibrium study revealed that the sound interlayer structure was formed by relatively low brazing treatment at $710^{\circ}C$. Thin Ag electro-plated layer precoated on the electric contact ($3{\mu}m$ in thickness) is thought to be enough for high adhesion strength arid sound microstructure in interface layer.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.1
• /
• pp.245-272
• /
• 2014

This study aims to explore the present and future of agricultural extension system in Uganda. Though Uganda has used many approaches in its agricultural extension, very little has been registered in farm productivity and profitability. Too many reforms some of them some are top-down while others are bottom - up. In most cases these reforms may not be given a chance to develop to show their impact. Future success of agricultural extension and rural development efforts in Uganda will depend not only on the presence of technical expertise and availability of resources but also on each government's willingness to redefine the role of its institutions and to allow the active participation of rural people in formulating and implementing and agricultural extension and rural development programs. As result the public extension systems in Uganda needs to be demand-driven so to make it relevant and important to the beneficiary.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.90-98
• /
• 2009

Every spring, Korea is always plagued by sandy dust from the western region of China and Mongolia. Yellow sand is causing an environmental problem to Japan and far into the American continent, let alone Korea. At present, the western region of China is going under desertification at a great speed due to climatic change and humans' damaging activities. To cope with this, each country including China is considering ecological restoration of deserts through planting. Accordingly, this research conducted a vegetation survey on Baicheng district which is a representative dry land of western China to obtain a basic data for ecological restoration of a desert. The survey revealed that Setaria viridis which invaded an arid land made a succession into Setaria viridis-Cannabis sativa var. fruderalis community together with Artemisia mongolica-Setaria viridis community due to the increase in salt concentration and alkalization subsequent to dryness. It was also found out that there finally formed Artemisia mongolica community on a flat intense in harsh wind and dryness with the continuous worsening of environmental conditions. There appeared a different type of vegetation on hilly districts where sporadic shade could come into being because the air humidity could be available relatively there. Frequently, typically appearing at the whole survey area, the Tributlus terrestris community was found to make succession into Tribulus terrestris-Cleisrogenes squarrosa community due to the aggravation of soil environment. In addition, with the worsening of the environment at hilly districts, there formed Clesirogenes squarrosa community resistant to dryness, salinity in soil and strong alkalinity. Further, there appeared higher plant life totalling to 62 taxa comprising 58 species and 4 varieties with 27 families and 49 genuses at the whole survey area. Among these, Compositae plants excellent in resistance to environment was surveyed the most, accounting for 27%.

• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.245-254
• /
• 2020

The interaction between the frozen soil and building structures deteriorates with the increasing temperature. A nuclear magnetic resonance (NMR) stratification test was conducted with respect to the unfrozen water content on the interface and a shear test was conducted on the frozen soil-structure interface to explore the shear characteristics of the frozen soil-structure interface and its failure mechanism during the thawing process. The test results showed that the unfrozen water at the interface during the thawing process can be clearly distributed in three stages, i.e., freezing, phase transition, and thawing, and that the shear strength of the interface decreases as the unfrozen water content increases. The internal friction angle and cohesive force display a change law of "as one falls, the other rises," and the minimum internal friction angle and maximum cohesive force can be observed at -1℃. In addition, the change characteristics of the interface strength parameters during the freezing process were compared, and the differences between the interface shear characteristics and failure mechanisms during the frozen soil-structure interface freezing-thawing process were discussed. The shear strength parameters of the interface was subjected to different changes during the freezing-thawing process because of the different interaction mechanisms of the molecular structures of ice and water in case of the ice-water phase transition of the test sample during the freezing-thawing process.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.2
• /
• pp.1-15
• /
• 2007

The purpose of this study is to design and develop a mobile game using J2ME, which is currently the most popular choice for game development to understand the process of mobile game development and to develop methods that address weaknesses of J2ME. The development was done with the Eclipse IDE(Integrated Development Environment) tool to simplify mobile game development by removing the need for complex commands and installation processes which are intrinsic to the DOS command Batch file arid J2ME Wireless Toolkit when used for the implementation of java mobile games. Literature was also reviewed on mobile game environments, the structures of J2ME Platform, and past research on mobile games, to investigate which parts of J2ME are important to the characteristics of mobile game development and how to implement these important parts when developing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.377-381
• /
• 2002

The growth rate, feed conversion efficiency and carcass characteristics of nine native Malpura (M) and eight Awassi ${\times}$ Malpura half bred (AM) male lambs were compared under intensive feeding on 60:40 concentrate and roughage based composite feed. Weaning body weight was similar in the two genetic groups while finishing body weight, total body weight gain and average daily gain during the experiment were higher (p<0.01) in AM than M lambs. The feed conversion efficiency was lower in M than AM lambs with 15.7 and 19.8 per cent feed conversion efficiency, respectively, in the two genetic groups. The dressing yield in terms of preslaughter weight or empty live weight was however similar in the two genetic groups. The loin eye area was also greater (p<0.01) in AM than M lambs. The cutability was similar for the two groups amounting to 33.2, 13.3, 13.2, 23.3 and 16.6% of half carcass, respectively, for leg, loin, rack, neck and shoulder and breast and foreshank. On an average the separable lean, fat and KOH bone content of the half carcass were 48.3, 16.8 and 23.3% for native M and 54.1, 15.0 and 19.0% for AM lambs, respectively. It is concluded that growth rate and feed conversion efficiency were better in Awassi ${\times}$ Malpura half bred than native Malpura lambs while dressing yield and cutability of standard cuts were similar in the two genetic groups.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.4
• /
• pp.171-179
• /
• 1996

A proposal of the basic fbrm on the design of joint parts that can increase the shear strength by the useful joint shapes of each member is intended. The vertical joint parameters are the number of' shear key and a variety of' reinfbrcement details and the horizontal joint paramctcrs arc t,hc number of shear key and the direction of' shear f'orcc. 10 PC panel vortical joint arid 12 PC panel horizontal joint specimens were tested to investigate the effects of these parameters. Test results show that : 1. The ductility of the test specimen that has the horizontal reinforcing steels is larger than that does not have. 2. The maximum resisting force of round bar specimen is similar to that of strand wire specimen under the condition of fixed horizontal displacement.