• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.817-821
• /
• 2007

The effect of acetylated rice (AR) starch at different concentrations (0, 4, 6, and 8%) on rheological properties of surimi sols and gels was studied. Dynamic frequency sweeps of surimi-AR starch sols at $10^{\circ}C$ showed that the magnitudes of storage moduli (G') decreased with an increase in starch concentration while those of tan ${\delta}$ increased, indicating that the effect of AR starch on the viscoelastic properties of surimi sols depended on starch concentration. In general, the G' thermograms of surimi sols showed the similar sol-gel transition pattern and they were also influenced by the addition of AR starch. The presence of AR starch in the surimi gel system reduced the gel strength and expressible moisture content (EMC). Surimi-AR starch gels showed better freeze-thaw stability compared to the control (0% starch concentration). The effect of AR starch on the rheological properties of surimi sols and gels appeared to be related to the swelling ability of starch granules in the presence of limited water available for starch.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.230-234
• /
• 2011

High density plasma etching of ZnO film was performed in $CF_4$/Ar and $SF_6$/Ar inductively coupled plasmas. Maximum etch rates of ~1950 ${\AA}$/min and ~1400 ${\AA}$/min were obtained for $10CF_4$/5Ar and $10SF_6$/5Ar ICP discharges, respectively. The etched ZnO surfaces showed better RMS roughness values than the unetched control sample under most of the conditions examined. In the $10CF_4$/5Ar ICP discharges, very high etch selectivities were obtained for ZnO over Ni (max. 11) while Al showed etch selectivities in the range of 1.6~4.7 to ZnO.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.243-250
• /
• 2019

With the popularization of online learning, mobile learning and blended learning model, augmented reality technology is increasingly widely applied in the field of education today. This article stresses the necessity of applying augmented reality to education by summarizing the current situation and advantages of augmented reality technology in education. Next, the author proposes a new education system-"AR+E education cloud platform system". Last, the author proposes several inspirations for the design of AR-based education software according to the observation and interview of the behaviors and preferences of the respondents.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.853-856
• /
• 2005

Inductively coupled plasma reactive ion etching of magnetic tunnel junction (MTJ) stack, which is one of the key elements in magnetic random access memory, was studied. The MTJ stacks were patterned in nanometer size by electron(e)-beam lithography, and TiN thin films were employed as a hard mask. The etch process of TiN hard mask was examined using Ar, $Cl_2/Ar$, and $SF_6/Ar$. The TiN hard mask patterned by e-beam lithography was first etched and then the etching of MTJ stack was performed. The MTJ stacks were etched using Ar, $Cl_2/Ar$, and $BCl_3/Ar$ gases by varying gas concentration and pressure.

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.255-259
• /
• 2022

In this study, we fabricated ZnS substrates with excellent transmittance in the mid-infrared region (3-5 ㎛) using hot pressing instead of conventional chemical vapor deposition (CVD). Diamond-like carbon (DLC) was coated on either one or both sides of the ZnS substrates to improve their mechanical properties and transmittance efficiency. To reduce the reflectance and further improve transmittance in the mid-infrared region, anti-reflection (AR) coating was designed for DLC/ZnS /AR and AR/ ZnS /AR structures. The coating structure, microstructure, and optical properties of the AR-coated ZnS substrates were subsequently investigated by employing energy dispersive X-ray spectroscopy, scanning electron microscopy, and Fourier-transform infrared (FTIR) spectroscopy. The FTIR spectroscopy results demonstrated that, in the mid-infrared region, the average transmittance of the samples with AR coating on one and both sides increased by approximately 18% and 27%, respectively. Thus, AR coating improved the transmittance of the ZnS substrates.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.921-927
• /
• 1995

Peach pulp was separated into serum and insoluble pulp by centrifugation at 11,000 rpm for 10 min. The serum portion was concentrated at $50{\sim}55^{\circ}C$ and $30{\sim}50\;mmHg$ with aroma recovery. Vapor generated at the early stage of vacuum evaporation was condensed and taken as aroma fractions: AR-1($0{\sim}5%$), AR-2($5{\sim}10$), AR-3($10{\sim}15%$), AR-4($15{\sim}20%$). Dynamic headspace concentration method was used to trap volatile compounds in aroma fractions and identification of aroma compounds was made by GC/MS. The yield of serum separated from peach pulp was 70.5% and the serum fraction contained the most of aroma compounds. Thirty-one aroma compounds, including ethylene, benzaldehyde, l-limonene and ${\gamma}-dodecalactone$ were identified. The efficiency of aroma recovery was reduced, as the recovery time was extended, as indicated by less peak numbers and peach areas of aroma fractions.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.540-549
• /
• 2002

The arrangement of encapsulated Ar atoms in the molecular-dimensioned cavities of fully dehydrated zeolite A of unit-cell composition $Cs_3Na_8HSi_{12}Al_{12}O_{48}$ ($Cs_3$-A) has been studied crystallographically to probe the confinement effect of guest species in microporous environment. Atoms of Ar were encapsulated in the cavities of $Cs_3$-A by treatment with 410 atm of Ar at $400^{\circ}C$ for two days, followed by cooling at room temperature. The crystal structure of $Cs_3Na_8H$-A(4Ar) ($P_e$ = 410 atm, $a=12.245(2){\AA}$, $R_1=0.0543$, and $R_2=0.0552$) has been determined by single crystal X-ray diffraction technique in the cubic space group $Pm\bar{3}m$ at 21 (1) $^{\circ}C$ and 1 atm. Encapsulated Ar atoms are distributed in three crystallographic distinct positions: 1.5 Ar atoms per unit cell opposite 6-rings, 1.5 opposite four-rings in the large cavity, and finally 1.0 in the sodalite-unit. The possible structures of argon clusters, such as $Ar_2$, $Ar_3$, and $Ar_4$, are proposed.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.3
• /
• pp.159-169
• /
• 2024

This paper proposes a new real-time fire monitoring and evacuation navigation system by integrating Augmented Reality (AR) technology with Internet of Things (IoT) technology. The proposed system collects temperature data through IoT temperature measurement devices installed in buildings and automatically transmits it to a MySQL cloud database via an IoT platform, enabling real-time and accurate data monitoring. Subsequently, the real-time IoT data is visualized on a 3D building model generated through Building Information Modeling (BIM), and the model is represented in the real world using AR technology, allowing intuitive identification of the fire origin. Furthermore, by utilizing Vuforia engine's Device Tracking and Area Targets features, the system tracks the user's real-time location and employs an enhanced A^* algorithm to find the optimal evacuation route among multiple exits. The paper evaluates the proposed system's practicality and demonstrates its effectiveness in rapid and safe evacuation through user experiments based on various virtual fire scenarios.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.566-568
• /
• 2022

Metaverse is the most emerging technology due to the recent 4th industry and the non-face-to-face society of Corona 19. As one of the core technologies of Metaverse, VR·AR technology is being industrialized in various fields such as medical care, education, and service. Among them, education and training are the most important fields of application, and nuclear power plant operation also requires this technology. In this paper, we will look at the fields of application of VR·AR technology in existing industries and suggest a plan for use in nuclear power plant work.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.101-104
• /
• 2018

Augmented Reality (AR) is an emerging technology and the applications of technology are still not fully unveiled. This paper explores a new application of augmented reality for new direction in art exhibitions, which aims to bring interactive learning experience to life. The project takes printed images on book or exhibiting arts to the next level by applying AR technology to provide a unique fascinating experience to its readers on mobile devices. AR technology composing with animation brings new digital entertainment experience to the user of art exhibitions. The key feature of this paper uses the technology presents auxiliary information in the field of view of an object on art exhibitions automatically without human intervention.