• Membrane and Water Treatment
• /
• v.14 no.2
• /
• pp.55-63
• /
• 2023

In this study, the influence of different IEMs (ion exchange membranes) to performance of the hypochlorite electrolysis unit with Cl₂ recovery stream was investigated. More specifically, Nafion 117-a representative cation exchange membrane (CEM)-and aminated polypheylene oxide (APPO)-an anion exchange membrane (AEM)-were installed in the hypochlorite electrolysis unit, and the performance and the energy efficiency of the units were evaluated and compared. Regardless of whether CEM (Nafion 117) or AEM (APPO) was installed, the rate of hypochlorite generation was increased (by up to 24.3% and 22.2% for Nafion 117 and APPO, respectively) compared with the unit without an IEM. On the other hand, the power efficiency and the optimum operation condition of hypochlorite production units seem to depend on the conductivity and stability of the installed IEM. As the result, between Nafion 117 and APPO, higher performance and efficiency were achieved with Nafion 117, due to excellent conductivity and stability of the membrane.

• Membrane Journal
• /
• v.30 no.5
• /
• pp.350-358
• /
• 2020

A membrane capacitive deionization (MCDI) cell is constructed by applying thin layer of a cation exchange membrane (Nafion) on cathode and an anion exchange membrane (aminated polyphenylene oxide, APPO) on anode. Compared to CDI cell without CEM and AEM coating, MCDI exhibits enhanced salt removal efficiency. When Nafion and APPO are used as CEM and AEM, optimized salt removal performance as high as 82.1% is observed when 1.2 V is applied for 3 min during absorption process and -1.0 V is applied for 1 min during desorption.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.488-495
• /
• 2015

Aminated polyphenylene oxide (APPO) based on polyphenylene oxide (PPO) was synthesized using trimethylamine and chloromethyl ethyl ether. Then, the electro-physical properties of APPO membranes which were prepared from the 8 wt% APPO solution dissolved in chloroform were characterized. Contact angle was $44.4^{\circ}$, swelling degree was 37.9%. The typical electrical properties of ion exchange capacity and ion conductivity were 2.3 meq/g, 0.027 S/cm, respectively. And the single gas permeation experiments were performed by using the time-lag method for $N_2$, $O_2$, $CH_4$, $CO_2$, $SO_2$. For the acid gases of $CO_2$ and $SO_2$, their permeability were measured 20.7 and 511.5 barrers, respectively. In the case of selectivity, $CO_2/CH_4$, $CO_2/N_2$ and $SO_2/CO_2$ were measured 39.8, 42.2, 24.7, respectively.