• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.481-484
• /
• 2012

차로에서 차량의 많은 증가는 안전과 무선통신의 가용성에 대한 필요성을 높여 왔다. Vehicular ad hoc networks(VANETs)은 다양한 차량 어플리케이션을 위한 용도와 상용분야로의 개발을 점차적으로 해오고 있다. 차량 간의 효과적인 통신범위를 제공하기 위해서 최적화된 라우팅 프로토콜이 필요하다. 지금까지 목적지까지 최적의 경로를 찾는 mobile ad hoc networks(MANETs)를 위한 많은 기존의 프로토콜들이 존재한다. 본 논문에서는 두 개의 라우팅 프로토콜들을 비교함으로써 VANET 환경을 위한 프로토콜 개선방향을 제시하였다. Multicast Ad-hoc On-Demand Distance Vector(MAODV)[1][2] 라우팅 프로토콜의 솔루션은 목적지 대상으로 최적의 경로를 탐색함으로써 더욱 향상된 결과를 보여준다. NS-2[3]는 라우팅 프로토콜 실험을 수행하고 결과를 도출하는데 사용되어 왔다. 실험을 통하여 최적의 라우팅 프로토콜에 대한 연구방향 및 개선될 사항을 찾고자 한다.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.240-244
• /
• 2022

The common goals of designing a routing algorithm are not only to reduce control packet overhead, maximize throughput and minimize the end-to-end delay, but also take into consideration the energy consumption. Scalability is an important factor in designing an efficient routing protocol for wireless sensor networks (WSN's). Three metrics (power consumption, time of transmission and packet loss rate) are used in order to compare three routing protocols which are AODV, DSDV and LEACH.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1465-1468
• /
• 2008

모바일 에드혹 네트워크(MANET)에서 익명 라우팅을 위해 각 노드가 익명ID를 이용하여 MAC 단에서 익명으로 서로를 인증하고 네트워크 단에서 익명 라우팅 수행하는 AODV 기반의 라우팅 기법이 제안된바 있다[4]. 하지만 기존의 제안된 방법은 익명ID가 변경될 때마다 페어링 연산을 통해 재인증을 해야 하며, 라우팅 경로 중간의 노드들은 메시지의 연결성을 없에게 위해 매홉마다 암·복호화를 반복하여 상당히 비효율적이다. 본 논문은 기존논문의 노드 인증 기법을 확장하여 실제 메시지의 교환과정에서 일어나는 홉 간 암호화 횟수를 줄이고, 임시 인증값을 이용한 노드 상호간의 빠른 인증 기법을 사용하여 노드간의 인증과 익명성을 보장하는 보다 효율적인 프로토콜을 제안한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.1069-1072
• /
• 2007

MANET에서의 전통적인 라우팅 프로토콜은 일반적으로 두 종류로 나눠지는데 proactive 라우팅 프로토콜과 on-demand 라우팅 프로토콜이다. 라우팅 정보의 proactive 전파와 reactive 발견 사이에는 필수적인 trade-off 가 존재한다. 모든 시나리오들을 충족하는 라우팅 프로토콜이 존재하지 않는 것은 분명하다. 그래서 최적의 라우팅 프로토콜을 발견하기 위한 연구가 계속되고 있으며 IETF의 MANET 워킹그룹은 여러 다른 프로토콜을 제안 중에 있고 그 중에 하나가 on-demand 라우팅 프로토콜의 AODV를 계승한 DYMO(Dynamic MANET On-demand)이다. DYMO는 경로 축적 메커니즘을 채택하였다. 경로 발견 과정에서 노드들은 라우팅 메시지를 포워딩하기 전에 그들 자신의 라우팅 정보도 패킷에 추가할 수 있다. 결국 소스와 목적지 사이의 모든 노드들의 라우팅 정보가 교환되는 것이다. 이 논문에서는 이 경로 축적 메커니즘의 사용 유무에 따라 다양한 속도와 트래픽 부하에서 DYMO의 성능이 어떻게 변하고 최적의 환경은 무엇인지 연구해보고자 한다.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.433-440
• /
• 2010

Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.64-75
• /
• 2007

Service discovery protocols is software components to find specific services or resources on network. The SLP defined by IETF protocol is a framework for automatic service discovery on IP based networks. Automatic service discovery is an important component on ubiquitous computing environment. This paper proposes a service discovery architecture named as SLPA(Service Location Protocol based on AMAAM). AMAAM(Mobility Agent Advertisement Mechanism) is an aggregation-based Mobile IP implementation in MANET. In SLPA, the role of the directory agent is assigned to the mobility agent in AMAAM. The mobility agent periodically beacons an advertisement message which contains both the advertisement of the directory agent in SLP and the advertisement of the mobility agent in Mobile IP. For evaluating the functional correctness of SLPA and the overhead of maintaining a service directory of SLPA. We simulate SLPA using ns-2 and analyze the overhead of control overheads for the aggregation. Through the simulation experiments we show the functional correctness of the proposed architecture and analyze the performance results.

• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.175-183
• /
• 2006

An ad-hoc network is a group of mobile nodes acting as routers. The of hoc node has a precondition of mobility, allowing path to be easily disconnected when transmitting data, thereby increasing network overhead. However, most of hoc routing protocols set up the path based only on the number of hops without considering other practical factors. Here we consider a path with the least substantial number of transmission (SNT) from source to destination based on reliabilities of links. This includes retransmissions due to unreliable links. In this paper, an efficient ad-hoc link reliability based routing (PU) protocol suitable for mobile ah-hoc network in terms of SNT, is proposed. The network overhead and data transmission delay ore reduced, by considering both ad-hoc link reliability and the number of hops. Our empirical performance evaluation comparing to AODV (8) shows that the enhancement is up to about 31% for SNT depending upon the mobility of nodes.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.296-311
• /
• 2007

Mobile multi-robot teams are useful in many critical applications such as search and rescue. Explicit communication among robots in such mobile multi-robot teams is useful for the coordination of such teams as well as exchanging data. Since many applications for mobile robots involve scenarios in which communication infrastructure may be damaged or unavailable, mobile robot teams frequently need to communicate with each other via ad hoc networking. In such scenarios, low-overhead and energy-efficient routing protocols for delivering messages among robots are a key requirement. Two important primitives for communication are essential for enabling a wide variety of mobile robot applications. First, unicast communication (between two robots) needs to be provided to enable coordination and data exchange. Second, in many applications, group communication is required for flexible control, organization, and management of the mobile robots. Multicast provides a bandwidth-efficient communication method between a source and a group of robots. In this paper, we first propose and evaluate two unicast routing protocols tailored for use in ad hoc networks formed by mobile multi-robot teams: Mobile robot distance vector (MRDV) and mobile robot source routing (MRSR). Both protocols exploit the unique mobility characteristics of mobile robot networks to perform efficient routing. Our simulation study show that both MRDV and MRSR incur lower overhead while operating in mobile robot networks when compared to traditional mobile ad hoc network routing protocols such as DSR and AODV. We then propose and evaluate an efficient multicast protocol mobile robot mesh multicast (MRMM) for deployment in mobile robot networks. MRMM exploits the fact that mobile robots know what velocity they are instructed to move at and for what distance in building a long lifetime sparse mesh for group communication that is more efficient. Our results show that MRMM provides an efficient group communication mechanism that can potentially be used in many mobile robot application scenarios.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.1
• /
• pp.25-33
• /
• 2020

Multipath routing protocols with unmanned aerial vehicles have been proposed to improve reliability in tactical ad hoc networks. Most of existing studies tend to establish the paths with multiple metrics. However, these approaches suffer from link loss and congestion problems according to the network condition because they apply same metric for both ground and air path or employ the simple weight value to combine multiple metrics. To overcome this limitation, in this study, we propose new routing metrics for path over unmanned aerial vehicles and use the multi-criteria decision making (MCDM) method to determine the weight factors between multiple metrics. For the case studies, we extend the ad-hoc on-demand distance vector protocol and propose a strategy for modifying the route discovery and route recovery procedure. The simulation results show that the proposed mechanism is able to achieve high end-to-end reliability and low end-to-end delay in tactical ad hoc networks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.387-392
• /
• 2014

Now a days, there are various application functions to transmit from vehicles to the Internet and vice versa. And the communication can be operated through a roadside infrastructure including with possible use of routing protocols. Specifically, autonomous vehicles for remote driving and monitoring requires transmitting of high depth of multimedia such as video. Especially in a populated urban area, an efficient network is vital because of handling a great amount of the data. Therefore, in this paper, efficient network topology for a crossroad in urban area is suggested by performance evaluation of vehicular networks using a wireless LAN and a routing protocol. For the performance evaluation, various vehicular network topologies are designed and simulated in OPNet simulator.