• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.5
• /
• pp.251-259
• /
• 2020

Ad hoc On-demand Distance Vector (AODV) protocol and its variants employ two important timers, hello and hold timer to keep track of topology changes. Moreover, hold timer is computed by multiplying constant value to hello timer. But, this configuration leads to inaccurate settings of hold timer. To solve this problem, in this paper, we propose a new dynamic adjustment of hello and hold timer scheme by removing dependency between them. A new metric to measure mobility is applied into hello timer, while expected link lifetime does holder timer. Simulation results show a significant reduction in the number of messages, a fact suggesting that it is possible to maintain and in some cases improve the performance of AODV with a minimum amount of messages released into the network.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.487-489
• /
• 2003

애드 혹 망은 유선 기반망 없이 무선 노드만으로 구성된 망을 말한다. 이러한 특징으로 인하여 빠른 망 구축을 가능하게 하지만, 망의 동적인 구조와 노드들의 이동성을 고려할 때 효율적인 데이터 전송을 위한 경로 유지는 중요한 문제로 대두된다. 본 논문에서는 애드 혹 라우팅 프로토콜 중의 하나인 AODV(Ad­hoc On­demand Distance Vector) 라우팅 프로토콜에서의 지역복구 (local repair) 시 경로설정 패킷의 플러딩 범위를 제한하는 범위 제한적(seeped) 플러딩을 이용한 효율적인 지역복구 기법을 제안한다. 이 방법의 경우 기존의 AODV 지역복구에 비해서 경로설정 오버헤드를 줄이고 데이터 전송률을 높일 수 있다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.1
• /
• pp.25-33
• /
• 2020

Multipath routing protocols with unmanned aerial vehicles have been proposed to improve reliability in tactical ad hoc networks. Most of existing studies tend to establish the paths with multiple metrics. However, these approaches suffer from link loss and congestion problems according to the network condition because they apply same metric for both ground and air path or employ the simple weight value to combine multiple metrics. To overcome this limitation, in this study, we propose new routing metrics for path over unmanned aerial vehicles and use the multi-criteria decision making (MCDM) method to determine the weight factors between multiple metrics. For the case studies, we extend the ad-hoc on-demand distance vector protocol and propose a strategy for modifying the route discovery and route recovery procedure. The simulation results show that the proposed mechanism is able to achieve high end-to-end reliability and low end-to-end delay in tactical ad hoc networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1330-1347
• /
• 2018

Mobile Ad hoc Network (MANET) is a collection of nodes or communication devices that wish to communicate without any fixed infrastructure and predetermined organization of available links. The effort has been made by proposing a scheme to overcome the critical security issue in MANET. The insufficiency of security considerations in the design of Ad hoc On-Demand Distance Vector protocol makes it vulnerable to the threats of collaborative black hole attacks, where hacker nodes attack the data packets and drop them instead of forwarding. To secure mobile ad hoc networks from collaborative black hole attacks, we implement our scheme and considered sensor's energy as a key feature with a better packet delivery ratio, less delay time and high throughput. The proposed scheme has offered an improved solution to diminish collaborative black hole attacks with high performance and benchmark results as compared to the existing schemes EDRIAODV and DRIAODV respectively. This paper has shown that throughput and packet delivery ratio increase while the end to end delay decreases as compared to existing schemes. It also reduces the overall energy consumption and network traffic by maintaining accuracy and high detection rate which is more safe and reliable for future work.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.131-142
• /
• 2011

In this paper, we propose a new multipath routing protocol and compare it with other multipath routing protocols in mobile ad hoc network (MANET) environments. The new multipath routing establishes the main route using a mechanism based on Ad Hoc On-demand Distance Vector(AODV), after which data transmission starts immediately. The backup route search process takes place while data are transmitted, to reduce the transmission delay. The protocol can also operate in a hybrid node-disjoint/link-disjoint mode, where the protocol finds the node-disjoint backup route first; if the node-disjoint does not exist, the protocol discovers the link-disjoint backup route from the main route. When either of the main route or the backup route is broken, data are transmitted continuously through the other route and the broken route is recovered by the route maintenance process. The results of simulations, based on the Qualnet simulator, show that the proposed multipath routing protocol increases the packet transmission success rate and reduces end-to-end delays, when compared with AODV and AOMDV protocols.

• Annual Conference of KIPS
• /
• 2005.11a
• /
• pp.1323-1326
• /
• 2005

무선 센서 네트워크의 설계에 있어서 전력 소모는 중요 요소이다. 본 논문은 AODV (Ad-hoc On-demand Distance Vector) 라우팅 프로토콜을 센서 네트워크에 적용하여 망 전체의 전력 소모를 최소화하고 수명 시간을 연장하려 한다. 이를 위해 전송 경로 탐색시 필요한 경로 요구 메시지(RREQ:Route Request)에 불응답 필드(No Reply Field)와 데이터 필드(Data Field)를 추가, 확장하여 전송 경로 탐색과 데이터 전송이 동시에 수행되어져 각종 제어 메시지(경로 응답, 경로 에러, 헬로 메시지)를 감소시키는 것을 제안한다. 이는 싱크 노드에 최종 데이터가 전송되는 시간이 기존 대비 20% 연장되고 노드 이동성에 따른 망의 토폴로지의 변화에도 강한 경향을 나타낸다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2015-2016
• /
• 2011

Detection of data cleaning bed of because method of communication uses AODV(Ad hoc On-demand Distance Vector) Zig-Bee communication though communication method is important being separated by several part structurally data monitor ring do it way to understand be. Although data that detect in transmitter will get into several kinds, data of each senses is detected by 4 - 20 mA conclusively and remainder data is consisted of temperature data. That is measured in transmitter in mast baud via conversion relation to do monitorring norm of data being decided to PC mistake of measured value so that can do control between enforcement compose. Speak that can manage equipment of cleaning bed by number of persons who write if detect data detection in wide cleaning bed through Zig-Bee communication and is easy because also administration of data consists of real time.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.1-8
• /
• 2021

In Mobile Ad-Hoc Network (MANET) Application, routing protocol is essential to ensure successful data transmission to all nodes. Ad-hoc On-demand Distance Vector (AODV) Protocol is a reactive routing protocol that is mostly used in MANET applications. However, the protocol causes Route Request (RREQ) message flooding issue due to the broadcasting method at the route request stage to find a path to a particular destination, where the RREQ will be rebroadcast if no Request Response (RREP) message is received. A scalable neighbor-based routing (SNBR) protocol was then proposed to overcome the issue. In the SNBR protocol, the RREQ message is only rebroadcast if the number of neighbor nodes less than a certain fix number, known as drop factor. However, since a network always have a dynamic characteristic with a dynamic number of neighbor nodes, the fix drop factor in SNBR protocol could not provide an optimal flooding problem solution in a low dense network environment, where the RREQ message is continuously rebroadcast RREQ message until reach the fix drop factor. To overcome this problem, a new broadcasting method as Dynamic SNBR (DSNBR) is proposed, where the drop factor is determined based on current number of neighbor nodes. This method rebroadcast the extra RREQ messages based on the determined dynamic drop factor. The performance of the proposed DSNBR is evaluated using NS2 and compared with the performance of the existing protocol; AODV and SNBR. Simulation results show that the new routing protocol reduces the routing request overhead, energy consumption, MAC Collision and enhances end-to-end delay, network coverage ratio as a result of reducing the extra route request messages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.785-800
• /
• 2013

In MANET, AODV(Ad hoc On-demand Distance Vector) has its advantages as on-demand approach but it also has a disadvantage that the control packet overhead is high compared to other routing protocols. This paper improves the problem caused by Hello messages that are broadcasted periodically to detect the local connectivity and maintain neighbor list. Periodic hello messages reduce the Packet delivery ratio and the efficiency in the limited bandwidth. And its increased Control packet overhead leads to decrease the Residual battery capacity and the Network lifetime. Further, non-reactive nature of periodic hello messages in AODV has also been the source of numerous controversies. In order to solve these problems, this paper improves the performance by using the interrupt driven approach which removes periodic hello messages and decreases the Control packet overhead. Performance comparisons between the traditional AODV and proposed mod_AODV done with network simulator QualNet 5.0 show that the mod_AODV performs better in most performance metrics under scenarios with various values of simulation parameters.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.219-226
• /
• 2006

The shortest path is only maintained during short time because network topology changes very frequently and each mobile nodes communicate each other by depending on battery in MANET(Mobile Ad-hoc Network). So many researches that are to overcome a limitation or consider a power have executed actively by many researcher. But these protocols are considered only one side of link stability or power consumption so we can make high of stability but power consumption isn't efficient. And also we can reduce power consumption of network but the protocol can't make power consumption of balancing. For that reason we suggest RBSSPR(Residual Battery Capacity and Signal Strength Based Power-aware Routing Protocol in MANET). The RBSSPR considers residual capacity of battery and signal strength so it keeps not only a load balancing but also minimizing of power consumption. The RBSSPR is based on AODV(Ad-hoc On-demand Distance Vector Routing). We use ns-2 for simulation. This simulation result shows that RBSSPR can extense lifetime of network through distribution of traffic that is centralized into special node and reducing of power consumption.