• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1008-1011
• /
• 2001

The purpose of this paper is to evaluate the chip breakability during turning using the experimental equation, which is developed by an orthogonal array method. The chip breaking index(CB), non-dimensional parameter is used in the evaluation of chip breakability. The analysis of variance(ANOVA)-test has been used to check the significance of cutting parameters. And using the result of ANOVA-test, the experimental equation of chip breakability, which consists of significant cutting parameters, has been developed.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.245-251
• /
• 2008

The research proposes three ANOVA(Analysis of Variance) tests using expected mean square(EMS) algorithms in various split-plot designs. The variance tests consist of Never-Pool test, Sometimes-Pool test and Always-Pool test. This paper also presents two EMS algorithms such as standard method and easy method. These algorithms are useful to make a decision rule for pooling. Numerical examples are illustrated for various split-plot designs such as split-plot designs, split-split-plot designs, repetition split-plot designs, and nested designs. Pragmatically, the results are summarized and compared with popular ANOVA spreadsheets and data model equations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.862-865
• /
• 2000

The object of this paper is to evaluate the surface roughness using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. $L_9{3^4}$ orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. And the analysis of variance (ANOVA)-test has been used to check the significance of cutting parameters. Using the result of ANOVA-test, the experimental equation of surface roughness, which consists of only significant cutting parameter - feed rate, has been developed. The coefficient of determination of this equation is 0.962.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.108-114
• /
• 2013

This paper describes process optimization for thermal-sprayed Co-based self-flux alloy coating by Taguchi method. Co-based self-flux alloy coatings were fabricated according to $L_9(3^4)$ orthogonal array using flame spray process. Hardness test and wear test were performed, the results were analyzed by analysis of variance(ANOVA) considering a multi response signal to noise ratio(MRSN). From the results of ANOVA, the optimal combination of the flame spray parameters on Co-based self-flux alloy coating could be predicted. The calculated hardness and wear rate of the coatings by ANOVA were found to be close to that of confirmation experimental result.

• 응용통계연구
• /
• 제35권5호
• /
• pp.579-591
• /
• 2022

함수 데이터는 다양한 분야에서 수집되고 있으며, 집단 간의 함수 데이터를 비교해야하는 경우가 종종 발생한다. 이럴 경우 점별 분산분석 방법을 이용하여 설명하기에는 무리가 있으며, 통합된 결과를 제시할 필요가 있다. 이에 대한 다양한 연구가 제안되었으며, 최근에 R 패키지 fdANOVA로 구현되었다. 이 논문에서 우선 분산분석 및 다변량 분산분석을 설명하고, 최근에 제안된 다양한 단변량 및 다변량 함수 데이터 분산분석을 설명하고자 한다. 또한 R 패키지 fdANOVA의 사용 방법을 설명하고, 이 패키지를 이용하여 서울과 부산 지역의 주별 기온을 단변량 함수 데이터 분산분석을 통해 비교하고, 손글씨 이미지를 다변량 함수 데이터로 변환하여 다변량 함수 데이터 분산분석을 이용하여 비교하고자 한다.

• 응용통계연구
• /
• 제23권2호
• /
• pp.317-323
• /
• 2010

Measures are very useful tools for comparing the shape variability in statistical shape analysis. For examples, the Procrustes statistic(PS) is isolated measure, and the mean Procrustes statistic(MPS) and the root mean square measure(RMS) are overall measures. But these measures are very subjective, complicated and moreover these measures are not statistical for comparing the shape variability. Therefore we need to study some tests. It is well known that the Hotelling's $T^2$ test is used for testing shape variability of two independent samples. And for testing shape variabilities of several independent samples, instead of the Hotelling's $T^2$ test, one way analysis of variance(ANOVA) can be applied. In fact, this one way ANOVA is based on the balanced samples of equal size which is called as BANOVA. However, If we have unbalanced samples with unequal size, we can not use BANOVA. Therefore we propose the unbalanced analysis of variance(UNBANOVA) for testing shape variabilities of several independent samples of unequal size.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.161-165
• /
• 2010

In the present study, process optimization for thermal-sprayed STS316 coating has been performed using $L_9(3^4)$ orthogonal array and analysis of variance (ANOVA). STS316 coatings were fabricated by flame spray process on steel substrate, and the hardness test and microstructure observation of the coatings were studied. The results of hardness test were analyzed by ANOVA. The ANOVA results showed that the spray distance had the greatest effect on hardness of the coating, on the other hands, the effects of oxygen gas flow and spray distance were ignorable. From these results, the optimal combination of the flame spray parameters could be derived, and confirmation experiment was carried out to verify these derived results. The calculated hardness of the coatings by ANOVA was found to approximately close to that of confirmation experimental result. Thus, it was considered that design of experiments using orthogonal array and ANOVA was effective for process optimization of thermal-sprayed STS316 coating.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.89-94
• /
• 2009

In this work, the optimal process has been designed by $L_9(3^4)$ orthogonal array and analysis of variance(ANOVA) for thermal-sprayed Ni-based hard coating. Ni-based hard coatings were fabricated by flame spray process on steel substrate. Then, the hardness test and observation of microstructure of the coatings were performed. The results of hardness test were analyzed by ANOVA. The ANOVA results demonstrated that the acetylene gas flow had the greatest effect on hardness of the coatings. The oxygen gas flow was found to have a neglecting effect. From these results, the optimal combination of the flame spray parameters could be predicted. The calculated hardness of the coatings by ANOVA was found to lie close to that of confirmation experimental result. Thus, it was considered that design of experiments design using orthogonal array and ANOVA was useful to determine optimal process of thermal-sprayed Ni-based hard coating.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.9-16
• /
• 2020

This study aims to assess the effects of specimen thickness (ST) on fatigue crack growth in the early stages of crack propagation and near failure in magnesium alloys. The analysis of variance (ANOVA) method was adopted because fatigue crack propagation in magnesium alloys exhibits statistical behavior. The equality of variance test and residual diagnostics were performed on the grown cracks to confirm the validity of ANOVA by verifying the normal distribution and mutual independence of the residuals and their homoscedasticity. ANOVA confirmed that ST heavily impacts crack growth; i.e., when ST is smaller, cracks grow faster in the early crack propagation stage and break more quickly before the formation of larger cracks. We found that ST significantly affects fatigue crack growth in the early crack propagation stage and near the failure stage in magnesium alloys. The regression model was also used to predict crack formation near the failure stage.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.273-278
• /
• 2016

This study makes a relative comparison of the results of tensile test and quasi-static analysis using AGL(Adjuster Guide Loop) model that plays a role in adjusting the height of shoulder belt, of the components of the vehicle seatbelt system and attempts to propose a method of reducing the error rate of the quasi-static analysis technique effectively. This study selects two major factors affecting the result of an analysis, draws the result of analysis through the method of experimental design, one of the statistical techniques and understands the contribution rate of the major factors affecting the result of the analysis through ANOVA(Analysis of Variance).