• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.889-893
• /
• 2005

본 연구에서는 기후변화에 따른 신뢰성 높은 수자원 영향평가를 수행하기 위한 방안으로 유출모형에 따른 불확실성을 최소화할 수 있는 슈퍼앙상블 기법을 제안하였다. 유출모형들은 자연현상을 개념화하는 과정에서 목적에 따라 알고리즘이나 구조가 다르게 개발된다. 따라서 동일한 유역에 동일한 입력자료를 사용하더라도 유출모의 결과는 상이하며 이는 곧 불확실성으로 작용한다. 이러한 불확실성을 최소화하기 위한 방법으로 본 연구에서는 통계적기법인 인공신경망 모형을 이용하여 모형별 유출결과를 향상시킬 수 있는 슈퍼앙상블 기법을 개발하고 적용성을 분석하였다. 적용 대상유역으로는 한강수계에 위치한 괴산댐유역을 선정하였으며, 적용 모형으로는 일체형 모형인 Tank 모형과 준분포형 모형인 PRMS 모형을 이용하여 슈퍼앙상블을 구축하고 검정하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.3
• /
• pp.258-266
• /
• 2008

The conventional approximate optimization method, which uses the statistical design of experiments(DOE) and response surface method(RSM), can derive an approximated optimum results through the iterative process by a trial and error. The quality of results depends seriously on the factors and levels assigned by a designer. The purpose of this study is to propose a new technique, which is called a sequential design of experiments(SDOE), to reduce a trial and error procedure and to find an appropriate condition for using artificial neural network(ANN) systematically. An appropriate condition is determined from the iterative process based on the analysis of means. With this new technique and ANN, it is possible to find an optimum design accurately and efficiently. The suggested algorithm has been applied to various mathematical examples and a structural problem.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.124-131
• /
• 2001

Fault diagnosis of an assembled small motor relies usually on human experts hearing ability. The quality of diagnosis depends, however, heavily on physical conditions of the human experts. A fault diagnosis system for assembled small motors is developed using artificial neural network (ANN) in this paper. It is consisted of sound sampling device and fault diagnosis software package. Six parameters are defined to characterize the sampled sound waves. The Levenberg-Marquardt Backpropagation (LMBP) Algorithm is used to diagnose the fault of assembled small motors. Experimental results for more than two hundred small motors verify the performance of the developed system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.186-191
• /
• 2013

Earth equipments are essential to protect ITS facilities from abnormal situation. In this research, an estimation algorithm of earth parameters and equivalent resistivity is introduced. Traditional estimation methods can be divided into graphic method and numerical method. The result of graphic method is varied by the ability of expert or repeated calculation and it is hard to estimate the parameters precisely. The numerical method requires special techniques such as optimizing theory, and numerous calculations, whose results can be varied with initial values. The proposed algorithm is based on the relationship between apparent resistances and earth parameters and approximates the nonlinear characteristics of earth using ANN(artificial neural networks). The effectiveness of proposed method is verified in case studies.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1657-1664
• /
• 2018

This paper proposes a decision making scheme for choosing the best move at each state of game in order to implement an artificial intelligence othello game player. The proposed decision making scheme predicts the various possible states of the game when the game has progressed from the current state, evaluates the degree of possibility of winning or losing the game at the states, and searches the best move based on the evaluation. In this paper, we generate learning data by decomposing the records of professional players' real game into states, matching and accumulating winning points to the states, and using the Artificial Neural Network that learned them, we evaluated the value of each predicted state and applied the Minimax search to determine the best move. We implemented an artificial intelligence player of the Othello game by applying the proposed scheme and evaluated the performance of the game player through games with three different artificial intelligence players.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.1-8
• /
• 2006

This paper describes the procedures developing the algorithm for analyzing signals acquired from the Bridge Weigh-in-Motion (BWIM) system installed in Seohae Bridge as a part of the bridge monitoring system. Through the analysis procedure, information about heavy traffics such as weight, speed, and number of axles are attempted to be extracted from time domain strain data of the BWIM system. One of numerous pattern recognition techniques, artificial neural network (ANN) is employed since it can effectively include dynamic effects, bridge-vehicle interaction, etc. A number of vehicle running experiments with sufficient load cases are executed to acquire training and/or test set of ANN. Extracted traffic information can be utilized for developing quantitative database of loading effect. Also, it can contribute to estimate fatigue lift or current health condition, and design truck can be revised based on the database reflecting recent trend of traffic.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.37-44
• /
• 2004

This paper represents a new approach for the protective relay of power transmission lines using a Artificial Neural Network(ANN). A different fault m transmission lines need to be detected classified and located accurately and cleared as fast as possible. However, The protection range of the distance relay is always designed on the basis of fixed settings, and unfortunately these approach do not have the ability to adapt dynamically to the system operating condition. ANN is suitable for the adaptive relaying and the detection of complex faults. The backpropagation algerian based multi-layer protection is utilized for the teaming process. It allows to make control to various protection functions. As expected, the simulation result demonstrate that this approach is useful and satisfactory.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.338-338
• /
• 2023

최근 특정 지역에 짧은 시간동안 많은 강우가 내리는 국지성 집중호우가 빈번히 발생하고 있으나, 이에 대한 예측과 대비에도 불구하고 피해는 지속적으로 증가하고 있다. 지속적인 강우량 증가 추이로 시간최대 및 일최대 강우량 관측기록이 해마다 갱신되고, 도시, 하천 및 주요 홍수방어 시설의 설계용량을 초과하는 피해가 발생하고 있다. 다수의 인구가 거주하고 대규모 기반시설이 집중된 도시지역에서 발생하는 집중호우는 심각한 인명 및 재산피해로 이어질 수 있다. 따라서, 부처별 재난의 저감대책은 정량적인 피해규모의 피해금액 예측보다는 설계 빈도에 대한 규모의 크기로 대책을 마련하고 있다. 국내에서는 풍수해 피해를 저감시키기 위해 개발에 따르는 재해영향요인을 개발 사업 시행 이전에 예측·분석하고 적절한 저감대책안을 수립·시행하고 있으나 설계빈도에 대한 규모일 뿐 정량적인 저감대책으로 예방되는 피해금액은 알 수 없다. 본 연구에서는 재해연보를 기반으로 호우재해(호우, 태풍)에 대한 시군구-재해기간의 피해데이터를 1999년부터 2019년까지 총 20년의 빅데이터와 전국 68개 강우관측소를 대상으로 총 20년(1999년 ~ 2019년)의 강우자료를 구축하였다. 머신러닝의 학습별 알고리즘을 조사하여 호우재해 피해데이터의 적용성이 높고 다양한 분야에 적용이 가능한 Neural networks의 분석기술인 ANN기법을 선정하였다 피해데이터의 재해발생기간별 총강우량, 일최대강우량, 총피해금액에 대하여 1999년 ~ 2018년을 학습하고 2019년에 대하여 강우특성과 피해특성의 분석하였다. 분석결과 Neural Networks의 지도학습은 총 6,902개 중 2019년을 제외한 6,414개를 학습하였으며 분석 타깃은 호우재해의 피해규모를 분석할 수 있는 총강우량, 일최대강우량, 총피해금액에 대하여 은닉노드 5개씩 2계층에 대하여 분석하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.485-493
• /
• 2008

The Artificial Neural Network (ANN) model was suggested for predicting probability of precipitation (PoP) using RDAPS NWP model, observation at AWS and upper-air sounding station. The prediction work was implemented for flood season and the data period is the July, August of 2001 and June of 2002. Neural network input variables (predictors) were composed of geopotential height 500/750/1000 hPa, atmospheric thickness 500-1000 hPa, X & Y-component of wind at 500 hPa, X & Y-component of wind at 750 hPa, wind speed at surface, temperature at 500/750 hPa/surface, mean sea level pressure, 3-hr accumulated precipitation, occurrence of observed precipitation, precipitation accumulated in 6 & 12 hrs previous to RDAPS run, precipitation occurrence in 6 & 12 hrs previous to RDAPS run, relative humidity measured 0 & 12 hrs before RDAPS run, precipitable water measured 0 & 12 hrs before RDAPS run, precipitable water difference in 12 hrs previous to RDAPS run. The suggested ANN has a 3-layer perceptron (multi layer perceptron; MLP) and back-propagation learning algorithm. The result shows that there were 6.8% increase in Hit rate (H), especially 99.2% and 148.1% increase in Threat Score (TS) and Probability of Detection (POD). It illustrates that the suggested ANN model can be a useful tool for predicting rainfall event prediction. The Kuipers Skill Score (KSS) was increased 92.8%, which the ANN model improves the rainfall occurrence prediction over RDAPS.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.