• The Journal of Korean Physical Therapy
• /
• v.18 no.1
• /
• pp.95-106
• /
• 2006

Purpose: The aim of this study was to investigate the kinematics of young adults during ramp climbing at different inclinations. Methods: Twenty-three subjects ascended and descended four steps at four different inclinations(level, $8^{\circ},\;16^{\circ},\;24^{\circ}$). Temporal-spatial parameters were measured by GaitRite system(standard mat). Groups difference was analysed with on-way ANOVA and Student-Newman-Keuls test. Results: The different kinematics of ramp ascent and descent were analysed and compared to level walking patterns. In ascending ramps, step length and stride length decreased with $24^{\circ}$ inclination (p<.000). Stance duration increased with $24^{\circ}$, but swing duration decreased with $24^{\circ}$ inclination (p<.000). Step time and velocity decreased with $16^{\circ}C,\;24^{\circ}$ inclination (p<.000). Cadence decreased with all inclination($8^{\circ},\;16^{\circ},\;24^{\circ}$)(p<.000). In descending ramps, step length and stride length, velocity decreased with all inclination($8^{\circ},\;16^{\circ},\;-24^{\circ}$)(p<.000). Stance duration increased with all inclination($8^{\circ},\;-16^{\circ},\;-24^{\circ}$) and swing duration decreased with all inclination($-8^{\circ},\;-16^{\circ},\;-24^{\circ}$)(p<.000). But Step time was not differentiated with different inclinations. Cadence decreased with only. $8^{\circ}$ inclination(p<.05). Conclusion: These results suggest that there is a certain inclination angle or angular range where subjects do switch between level walking and ramp walking gait pattern. This shows their motor control strategy between level and ramp walking. Further studies are necessary to confirm and detect the ascent and descent ramp gait patterns.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.315-327
• /
• 2017

In this paper, we present a method for estimating of position and velocity of a moving target by using the range and the bearing measurements from multiple sensors of aiming unit. In many cases, conventional low cost gyro sensor and a portable laser range finder(LRF) degrade the accuracy of estimation. To enhance these problems, we propose two methods. The first is background image tracking and the other is principal component analysis (PCA). The background tracking is used to assist the low cost gyro censor. And the PCA is used to cope with the problems of a portable LRF. In this paper, we prove that our method is robust with respect to low-frequency, biased and noisy inputs. We also present a comparison between our method and the extended Kalman filter(EKF).

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.47-54
• /
• 2015

In this study, we developed strategies for pre-processing GNSS data for the purpose of separating geodetic factors from crustal deformation due to the earthquakes. Before interpreting GNSS data analysis results, we removed false signals from GNSS coordinate time series. Because permanent GNSS stations are located on a large tectonic plate, GNSS position estimates should be affected by the tectonic velocity of the plate. Also, stations with surrounding trees have seasonal signals in their three-dimensional coordinate estimates. Thus, we have estimated the location of an Euler pole and angular velocities to deduce the plate tectonic velocity and verified with geological models. Also, annual amplitudes and initial phases were estimated to get rid of those false annual signals showing up in the time series. By considering the two effects, truly geodetic analysis was possible and the result was used as preliminary data for analyzing post-seismic deformation of the Korean peninsula due to the Tohoku-oki earthquake.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.4
• /
• pp.457-466
• /
• 2005

In this paper, we propose a wavelet neural network(WNN) based predictive control method for path tracking of mobile robots with multi-input and multi-output. In our control method, we use a WNN as a state predictor which combines the capability of artificial neural networks in learning processes and the capability of wavelet decomposition. A WNN predictor is tuned to minimize errors between the WNN outputs and the states of mobile robot using the gradient descent rule. And control signals, linear velocity and angular velocity, are calculated to minimize the predefined cost function using errors between the reference states and the predicted states. Through a computer simulation for the tracking performance according to varied track, we demonstrate the efficiency and the feasibility of our predictive control system.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.3
• /
• pp.187-196
• /
• 2014

This paper suggests linearity enhancement algorithm to Ensure safety of Mobile Walker on Slope. Mobile Walker happens to get off track due to external forces from Walker's weight and the degree of the slope while slope driving. In order to compensate this, this research used the controller that estimates the external forces according to the slope of road surface and adjusts it to the motor output. Also, through comparisons between targeted rotational angular velocity which the user inputs and its velocity of the robot, algorithm was applied which applies a weight to each shaft. As a result of applying the proposed correction controller, it diverges in case of non-compensation experiments that deviates when moving, but it case of applying the ramp calibration algorithm, the deviation distance at max was within 10cm that it keeps safe driving, and change rate of deviation distance was also stabilized after 1m where no more changes occurred.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.311-322
• /
• 2009

Using the 3-D analysis, this study winpared and analyzed the 'fade-shot swing' which is one of the golf technique. The subjects of this study were 3 male pro golfers they experimented with only a 7 iron. The purpose was to enhance their performance by producing the important kinematical parameters, finding out the features in them and providing the data to a coach and players. As a result, the position of the club head showed from the outside orbit to the inside orbit. When position of the center of mass moved backwards, the probability of the failure of the fade-shot increased. Cocking angle had an effect on easing the wrist for a smooth follow-through after the impact. It showed that the changes in the shoulder movement was made first and followed by the waist. The hip joint angular velocity achieved a smooth fade-shot motion due to the hitting delay also the velocity of the club-head was faster when uncocking was released at the time of impact.

• Ocean Systems Engineering
• /
• v.7 no.4
• /
• pp.435-460
• /
• 2017

The main objective of this study is to investigate the turning and zig-zag maneuvering performance of the well-known naval surface combatant DTMB (David Taylor Model Basin) 5415 hull with URANS (Unsteady Reynolds-averaged Navier-Stokes) method. Numerical simulations of static drift tests have been performed by a commercial RANS solver based on a finite volume method (FVM) in an unsteady manner. The fluid flow is considered as 3-D, incompressible and fully turbulent. Hydrodynamic analyses have been carried out for a fixed Froude number 0.28. During the analyses, the free surface effects have been taken into account using VOF (Volume of Fluid) method and the hull is considered as fixed. First, the code has been validated with the available experimental data in literature. After validation, static drift, static rudder and drift and rudder tests have been simulated. The forces and moments acting on the hull have been computed with URANS approach. Numerical results have been applied to determine the hydrodynamic maneuvering coefficients, such as, velocity terms and rudder terms. The acceleration, angular velocity and cross-coupled terms have been taken from the available experimental data. A computer program has been developed to apply a fast maneuvering simulation technique. Abkowitz's non-linear mathematical model has been used to calculate the forces and moment acting on the hull during the maneuvering motion. Euler method on the other hand has been applied to solve the simultaneous differential equations. Turning and zig-zag maneuvering simulations have been carried out and the maneuvering characteristics have been determined and the numerical simulation results have been compared with the available data in literature. In addition, viscous effects have been investigated using Eulerian approach for several static drift cases.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.1
• /
• pp.48-54
• /
• 2020

Numerical analysis was carried out to analyze the flow fields and mechanical output of a rotor for various positions and inlet flow rates in a shroud, and it was compared with experimental data. Rotor and seawater current largely affects the flow field characteristics in the shroud system. Especially the mechanical output of the rotor increased with axial position near the center of the cylinder, and it gradually decreased close to the entrance and exit. Also, the rotor output increased with the inlet velocity. Axial and angular momentum of flow along the cylinder region rapidly increased and reached a peak, and then decreased as it passed through the rotor, while there was no significant change in the cylinder region. It is expected that these results can be used as applicable design data for the development of the tidal power generation system.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.123-137
• /
• 2003

This study is to present more effective starting skills through analysis of kinematic characteristics of starting motions in 300m Time Trials of Inline Skating. To achieve this goal, 6 athletes, 3 in the national team and 3 in business teams were chosen and their starting motions were examined with three-dimensional image analyses. The results of analyses in regard of positions and speed of the bodily center and angles, angular velocity, and linear velocity of articulations of lower limbs by sections of starting motions are as follows: In case of the central position, though it is effective to reduce the air resistance by lowering the upper part of the body maximumly, it is reasonable to accelerate by raising the upper part of the body to some degree for the running posture at the lower speed in the starting section. In the starting section, it is efficient to minimize the period of time in touching the ground. for this, it is necessary to train for taking motions without slippage while touching the ground. While 3 athletes in business teams kicked the ground as running right after the starting, the others in the national team slid on the ground. As the number of steps increased, the movable speed changed quickly. Thus the movable speed of athletes in the national team indicated big differences in two to three steps. If these factors are well supported, the push-away starting method might be better than the running starting method in terms of improvement of records.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.1
• /
• pp.35-44
• /
• 2020

Propeller cavitation extent, pressure fluctuation induced by cavitation, pressure distribution on propeller blade, total velocity distribution and nominal wake distribution for a MR Taker were computed in both conditions of model test and sea trial using a code STAR-CCM⁺. Then some of the results were compared with model test data at LCT and full-scale measurement (Ahn et al (2014); Kim et al (2014)] in order to confirm the availability of a numerical prediction method and to get the physical insight of local flow around a ship and propeller. The nominal wake distributions computed and measured by LDV velocimeter on the variation of on-coming velocity show the wake contraction characteristics proposed by Hoekstra (1974). The numerical prediction of propeller cavitation extent on a blade angular position and pressure fluctuation level on each location of pressure sensors are very similar with the experimental results.