• 전기학회논문지P
• /
• 제62권3호
• /
• pp.111-116
• /
• 2013

Noise problem that occurs on the road is raising a lot of problems in the economic, social and environmental aspects. The objective of this paper is to propose ANC(active noise cancellation)-based road traffic noise reduction algorithm-model which can reduce noise by generating frequency opposed to noise sources to improve and complement the problem that existing physical form of a noise barrier. In this paper, we measured the noise characteristic from collection of two difference car noise also ANC simulation has been performed by using road traffic noises input. In order to compare the control performance, we performed noise reduction simulation of ANC by filtered-X LMS algorithm and delayed control signal injection. As a result of this simulation, we confirmed that convergence performance and noise decrease effect to the filtered-X LMS algorithm by inputting the road traffic noise.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.385-390
• /
• 2009

This paper presents a novel active noise control (ANC) system using least mean square (LMS) algorithm and neural network approach for decreasing acoustic noise signals inside high-speed trains. We construct a LMS framework as a nominal ANC system and additionally design an artificial single-layered perceptron model as an auxiliary ANC which is aimed to reduce real-time residuary noise due to its nonstationary and uncertain nature. Parameter vector of the hybrid ANC is determined through online estimation to realize an adaptive ANC configuration by means of the steepest descent algorithm. We achieve simulation experiment to demonstrate the proposed ANC system employing realistic acoustic noise signals measured in Korea Train eXpress (KTX).

• 전기학회논문지
• /
• 제59권5호
• /
• pp.1001-1004
• /
• 2010

Acoustic feedback and background noise variation can degrade the performance of an active noise control (ANC) system. In this paper, nonlinear ANC using a non-parametric VSS-NLMS (or NPVSS-NLMS) algorithm and online feedback path modeling is proposed, whereby the conventional linear ANC with online acoustic feedback-path modeling is further extended to nonlinear Volterra ANC with a linear acoustic feedback path. In particular, the step-size of the NPVSS-NLMS algorithm is controlled to reduce the effect of background noise variation in the ANC system. Simulation results demonstrate that the proposed approach yields better nonlinear ANC performance compared with the conventional nonlinear ANC method.

• 한국음향학회지
• /
• 제7권4호
• /
• pp.77-85
• /
• 1988

各種의 Conditioning Monitoring 技術이 硏究되고 있는데 本 硏究에서는 Cepstrum 解析法에 Adaptive Noise Cancelling (ANC) 법을 利用하여 回轉機械要素의 하나인 베어링의 缺陷을 管理하는 手段으로써의 可能性을 檢討하였으며 ANC의 物理的 意味를 正確히 把握하고자 컴퓨터 시뮬레이션을 行하였다. 컴퓨터 시뮬레이션에 衣해 Adaptive filter 에서의 最適한 適應利得을 推定하였으며 信號對雜音比에 따른 ANC의 性能과 LMS알고리즘의 收劍性을 考察하였다. 또한 ANC法을 Cepstrum 解析法에 利用한 베어링의 異常診斷은 旣存의 Cepstrum解析法보다 有效함을 알았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.836-841
• /
• 1987

Many kinds of conditioning monitoring technique have been studied, so this study has investigated the possibility of checking the trend in the fault diagnosis of ball bearing, one of the elements of rotating machine, by applying the cepstral analysis method using the adaptive noise cancelling (ANC) method. And computer simulation is conducted in oder to identify obviously the physical meaning of ANC. The optimal adaptation gain in adaptive filter is estimated, the performance of ANC according to the change of the signal to noise ratio and convergence of LMS algorithm is considered by simulation. It is verified that cepstral analysis using ANC method is more effective than the conventional cepstral analysis method in bearing fault diagnosis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.672-672
• /
• 2011

This study describes the comparison of noise suppression performances at different locations of two error microphones in active noise control (ANC) for outdoor applications. For this study, 12 different locations were predefined to decide best locations for error sensors in terms of suppressing noise. As shown in Fig. 1, the ANC system with one primary loudspeaker, two secondary loudspeakers and two error microphones is operated by a filtered-x LMS (FXLMS) algorithm which is implemented in a TI 6713 DSP board and Realsys 4713 AD/DA Extension board. The noise for the primary source is a typical road noise measured at a highway roadside. The lengths of adaptive filters of W1 and W2 are varied from 32 to 128 respectively. An intensive computer simulation was accomplished before outdoor ANC experiments. It is expected from the simulation results that the ANC performances are very much dependent upon the locations of the two error microphones.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.49-56
• /
• 2022

본 연구에서는 능동소음제어(ANC, Active Noise Control) 기술을 이용하여 공동주택의 층간소음을 저감시키는 시뮬레이션 기반 연구를 수행하였다. ANC의 층간소음 저감 활용 가능성을 검토하기 위하여 층간소음시험시설에서 가속도계와 소음 수집용 마이크로폰을 설치하여 임팩트볼 낙하에 의한 소음진동을 측정하여 Fx-LMS 알고리즘 기반의 능동소음제어 시뮬레이션을 수행하였다. 이 과정에서 적응제어 수렴계수 등의 최적 시뮬레이션 조건을 도출한 후 가속도계와 스피커 수량을 변수로 하는 수치 시뮬레이션을 통해 소음저감효과를 분석하여 제한된 조건에서 층간소음을 저감시킬 수 있는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.565-567
• /
• 2004

In active noise control (ANC) systems, the convergence behavior of the conventional Filtered-X Least Mean Square (FXLMS) algorithm may be affected by nonlinear distortions in the secondary path (e.g., in the power amplifiers, loudspeakers, transducers, etc.), which may lead to degradation of the error-reduction performance of the ANC systems. In this paper, a stable FXLMS algorithm with fast convergence is proposed to compensate for undesirable nonlinear distortions in the secondary-path of ANC systems by employing the Volterra filtering approach. In particular, the proposed approach is based on the utilization of the conventional P-th order inverse approach to nonlinearity compensation in the secondary path of ANC systems. Finally, the simulation results showed that the proposed approach yields a better convergence behavior In the nonlinear ANC systems than the conventional FXLMS.

• 한국음향학회지
• /
• 제37권5호
• /
• pp.331-337
• /
• 2018

본 논문에서는 창문형 능동소음제어(Active Noise Control, ANC)의 잔류 소음의 평가 기준으로 실내소음 평가에서 사용하는 NR(Noise Rating)을 적용하고 이 값의 최소화를 위한 능동소음제어기에 대해서 연구하였다. 이를 위해 Filtered-E LMS(Least Mean Square) 알고리즘을 사용하여 사용자가 설정한 유효 동작 주파수 대역 내에서 NR값을 줄이는 노이즈 쉐이핑(noise shaping) 필터의 형상을 제안하였다. 제안한 필터의 유용성은 시뮬레이션을 통해 검증하였으며, 기존의 심리음향 ANC에서 사용된 필터들과 비교했을 때 잔류 소음의 NR값이 더 낮아지는 것을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.238-239
• /
• 2008

In this paper, active noise control (ANC) of a Volterra system with a nonlinear secondary path is proposed in the presence of a linear acoustic feedback, whereby the conventional ANC of a linear system with online acoustic feedback-path modeling is further extended to ANC of a Volterra system with a linear acoustic feedback path. In particular, the proposed ANC system consists of two adaptive Volterra filters (for nonlinear noise control and nonlinear adaptive noise cancellation) and one feedback-path modeling filter. Simulation results show that the proposed approach yields more effective reduction of disturbances arising from the acoustic feedback, in addition to high nonlinear ANC performance.