• 대한기계학회논문집B
• /
• 제41권6호
• /
• pp.389-395
• /
• 2017

본 연구는 정적 연소 조건에서 Octane 단일 연료 액적의 매연 생성 거동에 관한 정보를 제공하기 위해 수행하였다. 이를 위해 동일한 분위기 압력($P_{amb}$) 1.0 atm과 산소 농도($O_2$) 21%, 질소 농도($N_2$) 79% 조건에서 초기 액적 직경($d_0$) 변화에 따른 Octane 액적의 매연 생성 특성 실험 결과를 제시하였다. Octane 액적 연소 가시화는 초고속 카메라를 사용하여 촬영하였고, 분위기 조건은 제어 시스템에 의해 동일한 조건을 유지하였다. Octane 액적 연소 결과, 매연 생성량은 동일한 분위기 조건에서 초기 액적 직경 변화의 영향이 크게 나타나지 않았다. 또한, 매연 체적 분율 최댓값($f_{vmax}$)은 $135^{\circ}{\sim}315^{\circ}$ 측정 방향에서 높은 결과를 보였다. 이는 액적 점화 이후 Igniter의 이동 과정에서 생성된 Soot-tail로 인해 매연 체적분율 결과가 증가된 것으로 나타났다.

• 한국미생물·생명공학회지
• /
• 제46권3호
• /
• pp.210-224
• /
• 2018

Warqe (Ensete ventricosum) has been traditionally fermented in an earthen pit to yield a carbohydrate-rich food product named kocho, for generations. A fermentation enhancer (gammaa) was added to this fermenting mass to enhance the fermentation process. The objectives of this study were to assess the physicochemical properties and microbiota of the kocho fermentation enhancer culture to reduce losses. Cross-sectional study design was implemented to collect 131 gammaa samples on the first day of fermentation. The samples were further classified into four groups according to the duration of fermentation (14, 21, 30, and 60 days) practised in various households traditionally. The results showed that the fermentation time significantly affected the physicochemical properties and microbial load of gammaa (p < 0.01). As the fermentation progressed from day 1 to 60, the pH decreased and the titratable acidity increased. The total coliform, Enterobacteriaceae, aerobicmesophilic bacteria (AMB), yeast, and mould counts were significantly reduced at the end of fermentation. In contrast, the number of lactic acid bacteria (LAB) increased significantly until day 30 of fermentation, because of the ability of the LAB to grow at low pH. Lactobacillus species from LAB isolates and Enter obacteriaceae from AMB isolates were the most abundant microorganisms in gammaa fermentation. However, the Enterobacteriaceae and Lactobacilli species count showed decreasing and increasing trends, respectively, as the fermentation progressed. These isolates must be investigated further to identify the species and strain, so as to develop gammaa at the commercial scale.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1254-1259
• /
• 2010

본 논문에서는 영상 내의 움직임은 시간 공간적으로 높은 상관관계를 가지는 특성을 고려하여 움직임 추정을 실행하는 블록을 참조 프레임과의 상관관계에 따라 평균 움직임 블록(AMB)과 부분 움직임 블록(LMB)으로 구분한다. 수정된 고속 탐색 패턴을 통해 적은 연산량을 가지며 블록의 구분, 하위 블록 사용 및 정합도 계산 시 인접 블록을 포함하는 블록 확장(BE)으로 움직임 추정의 정확도를 향상시키는 방법을 제안한다. 실험 결과를 통해서 제안된 알고리즘이 평균적으로 전역 탐색의 7.5%의 연산량으로 전역 탐색 보다 0.5dB, 다이아몬드 탐색 에서 보다 1.7dB의 화질의 향상을 가져오는 것을 확인 하였다. 제안한 알고리즘은 영상 압축이나 프레임률 변환(FRC)에 적용 가능하다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.487-492
• /
• 2011

The effect of the application of lanthanum strontrium manganite and yttria-stabilized zirconia (LSM-YSZ) nano-composite fabricated by pulsed laser deposition (PLD) as a cathode of solid oxide fuel cell (SOFC) is studied. A gradient-structure thin-film cathode composed of 1 micron-thick LSM-YSZ deposited at an ambient pressure ($P_{amb}$) of 200 mTorr; 2 micron-thick LSM-YSZ deposited at a $P_{amb}$ of 300 mTorr; and 2 micron-thick lanthanum strontium cobaltite (LSC) current collecting layer was fabricated on an anode-supported SOFC with an ~8 micron-thick YSZ electrolyte. In comparison with a 1 micron-thick nano-structure single-phase LSM cathode fabricated by PLD, it was obviously effective to increase triple phase boundaries (TPB) over the whole thickness of the cathode layer by employing the composite and increasing the physical thickness of the cathode. Both polarization and ohmic resistances of the cell were significantly reduced and the power output of the cell was improved by a factor of 1.6.

• 대한미생물학회지
• /
• 제22권3호
• /
• pp.301-307
• /
• 1987

A total of 42 strains of Candida albicans were examined for susceptibility to three antifungal agents, amphotericin B(AMB), 5-fluorocytosine(5-FC), and ketoconazole(KTZ), using defined medium, synthetic amino acid medium-fungal(SAAM-F), supplemented yeast nitrogen base(SYNB) and undefined medium Sabouraud's dextrose broth(SDB) and Kimmig broth media. A tube dilution method was used with minimum inhibitory concentrations(MICs) determined after incubation for 24 hour and 48 hours. All testes were performed in duplicate. In general, MICs were more reproducible after 48 hour of incubation. Forthermore, MICs determined after incubation for 48 hours were significantly higher than those determined after 24 hours. The actural MICs obtained with the different antifungal agents were clearly influenced by the test medium used. The rank order of AMB MICs according to the test medium was as follows: SAAM-F>SYNB>SDB>Kimmig broth. With 5-FC, the following pattern was observed: SYNB>SAAM-F>SDB>Kimmig borth. For ketoconazole, the MICs according to the test medium was SAAM-F>SDB>SYNB> Kimmig broth. In amphotericin B, the MICs mean value with the test medium was as follows: SDB, 0.24 mcg/ml; Kimmig broth, 0.29 mcg/ml; SYNB, 0.21 mcg/ml and SAAM-F, 0.15mcg/ml. The actural value of 5-FC was; SDB, 37.20 mcg/ml; Kimmig broth, 67.41mcg/ml; SYNB, 21.29 mcg/ml and SAAM-F, 24.61 mcg/ml and in ketoconazole, the MICs value was; SDB, 1.83 mcg/ml; Kimmig broth, 4.08 mcg/ml; SYNB, 1.95 mcg/ml and SAAM-F, 1.41 mcg/ml. The results of this investigation suggested that broth dilution susceptibility testing of yeast and yeast-like fungi are best performed with an incubation period of 48 hours. Furthermore, medium composition can significantly influence the results of such testing.

• 동력기계공학회지
• /
• 제16권3호
• /
• pp.22-28
• /
• 2012

Active magnetic bearings(AMBs) present a technology which has many advantages compared to traditional bearing concepts. However, they require backup bearings in order to prevent damages in the event of a system failure. In this study, the dynamics of an AMB supported rotor during impact on backup bearings is studied employing a detailed simulation model. The backup bearings are modeled using an accurate ball bearing model, and the model for a flexible rotor system is described using the finite element approach with the component mode synthesis. Not only the influence of the support stiffness, clearance and friction coefficient on the rotor orbit, but also bearing load are compared for various rotor system parameters. Comparing these results it is shown that the optimum backup bearing system can be applicable for a specific rotor system.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.338-348
• /
• 2001

A hybrid self-hearing motor, which Is a functional combination of general permanent magnet (PM) motor and hybrid active magnetic bearing(AMB), was proposed a few years ago. In this paper the hybrid self-bearing motor is modified to a disk type, in which one of two magnetic hearings was substituted for a thin yoke to make the system more compact. An outer rotors in this self-hearing motor is actively controlled only in two radial directions while the ocher motions are passively salable owing to the disk-type structure. Main advantages of the proposed self-hearing motor are simple control mechanism, low power consumption and smart structure. Mathematical model for the magnetic force Is built wish consideration of the radial displacement of the rotor. The model helps us not only to design a levitation controller but also to expect the system performance. Some experimental results show good capability and feasibility of the Proposed self-bearing motor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1375-1381
• /
• 2007

In this paper, we propose a linear modeling and identical PD controller design scheme for the three-pole hybrid-type AMB recently developed in the laboratory, which consists of three permanent magnets, providing bias flux, three Hall diodes, measuring rotor displacements, and ring type permanent magnet bearing, stabilizing in axial and tilting directions. Along the three physical coordinates formed by three poles, we introduce the redundant coordinate system and three identical decoupled controllers to construct linear model. The experiments are also carried out in order to verify the effectiveness of proposed controller in stabilizing the transient and steady state response of rotor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1028-1033
• /
• 2002

This paper concerns on a non-rotating axis-active magnetic bearing (AMB) system subject to base motion. In such a system, it is desirable to retain the axis within the predetermined air-gap. Motivated from this, an optimal acceleration feedforward control is proposed to reduce the base motion response without deteriorating other feedback control performances. Experimental results demonstrate that the proposed feedforward control reduces the air-gap deviation to 29% that by feedback control alone.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.447-450
• /
• 2003

This paper concerns on application of active magnetic bearing(AMB) system to levitate the elevation axis of an electro-optical sight mounted on moving vehicles. In such a system. it is desirable to retain the elevation axis within the predetermined air-gap while the vehicle is moving. A disturbance compensation control is proposed to reduce the base motion response. In the consideration of the uncertainty of the system model, a filtered-x least-mean-square(FXLMS) algorithm is used to estimate adaptively the frequency response function of the feedforward control which cancels disturbance responses. The frequency response function is fitted to an optimal feedforward control. Experimental results demonstrate that the proposed control reduces the air-gap deviation to 27.7% that by feedback control alone.