• Applied Microscopy
• /
• v.43 no.2
• /
• pp.75-80
• /
• 2013

The morphological features of pollen grains collected from the broad-leaved and cylindrical-leaved Portulaca species of the Hawaiian Islands were investigated. The variation in size and surface pattern were examined using scanning electron microscopy and statistical analysis. Pollens of the Portulaca were apolar grains of monads exhibiting apertures, colpi, and relatively thin echini. Of particular interest was the differing size of pollen grains among the species studied. Pollens of the broad-leaved Portulaca were considerable in size with a length of about $73{\sim}86{\mu}m$, while the cylindrical-leaved Portulaca tended to have smaller pollen grains ranging from 50~65 in diameter. The smallest pollens were found in cultivar 2 having an average of $43{\mu}m$. The pollen was intectate, and the exine surface appeared granulous, having sculptured elements of spinules and puncta. Two types of puncta were discerned; one forming an operculum, and the other, a simple perforation. Numerous spinules and small puncta were found throughout the cylindrical-leaved Portulaca. In the present study, morphological features of pollen grains from ten Hawaiian Portulaca species, including endemic and unknown taxa, revealed the aforementioned pattern of variation. This paper aim to provide morphological information that could be of phylogenetic value within the Hawaiian Portulaca.

• CDE review
• /
• v.4 no.3
• /
• pp.26-31
• /
• 1998

Recent trend of popularity of CAE(Computer Aided Engineering) tools and its availability, partly contributed by significant price reduction of H/W and SW, makes us believe CAE has already established terra firma as de jure tools, enablint the design improvement in the manufacturing am. However, if your jobs are required to be working closely with engineers located in the front line of manufacturing site, CAE is observed far from popularity, still being regarded as exclusive tools for engineers holding advanced degrees. Conventional methodologies depending on knowledge that was accumulated thorough trial and errors, depending primarily on engineering tables and formulas or proprietary know-how, are preferred as the de factor standard under the roof of contemporary development shops. Samsung camera, having stared its business since early 、80, has accumulated enough technological strength to compete in the world market. As today's consumers demand more sophisticated featured-lighter weight, built-in multi zoom and miniature size fitting in the palm-from camera manufacturer, so should Samsung camera respond to ever-delicate consumer's needs with great flexibility. Consequently conventional designers, without sophisticated analytical tools, with encounter solving the critical design factors that have never been treated as seriousness-marginal safety factors induced by reduced size of parts. In the study, CAE results of boss and gears were demonstrated as examples, which confirms the facts that the simple analysis done by front line designers, can bring distinguishable effects on the potential improvements of design and on the consequential influences on the future design process-simulation before actual tooling and productions.

• Speech Sciences
• /
• v.15 no.4
• /
• pp.159-170
• /
• 2008

The purpose of this study was to find out the ability of coordination of the articulatory motor and the ability of control of the respiration and laryngeal for spastic dysarthria by acoustic analysis. The sustained of vowel /a/ and repetition of syllable /pa/ in 15 normal and 10 spastic dysarthria were measured. Multi-Speech, MDVP, and MSP were used for data recording and analysis. As a result, the mean DDK rate in the spastic group was significantly slower than in the normal. The maximum phonation time in the spastic group ($4.80{\pm}1.94$) was shorter than in the normal ($11.20{\pm}3.72$). The DDKjit in the spastic group was significantly higher than in the normal. The DDKsla was reduced in the spastic group. The mean syllable duration in the spastic group (146.2ms) was significantly longer than in the normal (75.8ms). The mean energy was reduced in the spastic group. The range of Fo was greater than in the normal. The frequency perturbation (jitter, vFo) and amplitude perturbation (shimmer, vAm) were higher than in the normal group. The NHR was higher than in the normal group. The parameters of this were significantly difference between the spastic dysarthria and the normal (p<0.05). Finally, the spastic dysarthria has short respiration, slow speech rate, and voice quality problem. The these results will help to establish a plan and the intervention of treatment.

• Journal of Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.109-111
• /
• 2000

Effect of the two-stage operation and cell concentration on indirubin production was investigated using bioreactor culture of Polygonum tinctorium. Two-stage culture was operated successfully for 110 days without any adverse effects on continuous indirubin production. Maximum indirubin concentration was found to be at 80 mg/bioreactor. Initial cell concentration significantly affected indirubin production. The indirubin production at 29.2% PCV was improved by 845%, compared to that at 5% PCV. For high-density bioreactor culture of P. tinctorium, a maximum production rate of 10.2 mg indirubin/L day was obtained. Indirubin recovery for bioreactor operation was also examined using XAD-2, XAD-4, XAD-7, and solid silicon. XAD-4 was 1.6-fold more effective than that for solid silicon in indirubin recovery.

• Applied Microscopy
• /
• v.48 no.3
• /
• pp.73-80
• /
• 2018

Ductile cast iron is widely used for many automotive components due to its high wear resistance and fatigue resistance in addition to the low cost of fabrication. The improvement of wear resistance and fatigue properties is key to the life time extension and performance increase of the automobile parts. Surface nanocrystallization is a very efficient way of improving the performance of materials including the wear- and fatigue-resistance. Shot peening treatment, as one of the popular and economic surface modification methods, has been widely applied to various materials. In this study, ductile cast iron specimens were ultrasonic shot peening (USP) treated for 5 to 30 min using different ball size. The microstructures were then microscopically analyzed for determination of the microstructural evolution. After the USP treatment, the hardness of pearlite and ferrite increased, in which ball size is more effective than treatment time. With USP treatment, the graphite nodule count near the surface was decreased with grain refinement. The lager balls resulted in an increased deformation, whereas the smaller balls induced more homogenously refined grains in the deformation layer. In addition, formation of nanoparticles was formed in the surface layer upon USP.

• Applied Microscopy
• /
• v.46 no.1
• /
• pp.6-13
• /
• 2016

Fluorescence lifetime imaging microscopy (FLIM) has been considered an effective technique to investigate chemical properties of the specimens, especially of biological samples. Despite of this advantageous trait, researchers in this field have had difficulties applying FLIM to their systems because acquiring an image using FLIM consumes too much time. Although analog mean-delay (AMD) method was introduced to enhance the imaging speed of commonly used FLIM based on time-correlated single photon counting (TCSPC), a real-time image reconstruction using AMD method has not been implemented due to its data processing obstacles. In this paper, we introduce a real-time image restoration of AMD-FLIM through fast parallel data processing by using Threading Building Blocks (TBB; Intel) and octa-core processor (i7-5960x; Intel). Frame rate of 3.8 frames per second was achieved in $1,024{\times}1,024$ resolution with over 4 million lifetime determinations per second and measurement error within 10%. This image acquisition speed is 184 times faster than that of single-channel TCSPC and 9.2 times faster than that of 8-channel TCSPC (state-of-art photon counting rate of 80 million counts per second) with the same lifetime accuracy of 10% and the same pixel resolution.

• Journal of the Korean institute of surface engineering
• /
• v.16 no.1
• /
• pp.3-9
• /
• 1983

The change of the hardness and yield strength depending upon the electrolysis conditions was investigated for Watts and bright nickel electrodeposits. The hardness of Watts nickel electrodeposits decreased with increasing current density in the range of 1-15A/Am2, while it increased with increasing bath temperature. The hardness of bright nickel deposits increased noticebly in comparison with that of Watts nickel electro-deposits. The hardness and the yield strength of the bright nickel electrodeposits increased considerably with decreasing current density and the highest value was obtained at the lowest current density (1A/dm2), while they decreased noticebly at the bath temperature of 80$^{\circ}C$ in comparison with that of 40-60$^{\circ}C$. The change of the hardness and the yield strength of bright nickel electrodeposits depending upon the electrolysis conditions could be mainly attributed to the variation of organic additives codeposited in the electrodeposits. The recrystallizatioin temperature(50% softening temperature) of the Wattss and the bright nickel electro-deposits was 520-280$^{\circ}C$ and 350-410$^{\circ}C$ respectively and then the recystallization temperature of bright nickel deposits was lower than that of the Watts nickel electrodeposits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2362-2372
• /
• 1996

This paper deals with the design and development of an Injection-Locking Coupled Oscillators(ILCO), which functions like phase-shifter in the Active Intergrated Phased Array Antenna(AIPAA). This linear array 2-element ILCO consists of two Injection Locking Hair-pin Resonator Oscillators(ILHRO) and an unilateral amplifier. The first and second elements of the ILCO have same frequency tuning range but locking bandwidths of 11.5MHz and 14MHz respectively. A phase shift of .DELTA..PHI.=158.4.deg.(-78.0.deg. to 80.4.deg.) could be obtained inthe second element of ILCO when the first elementof the ILCO was in the reference locking mode(.DELTA..PHI.=0.deg.). When the ILCO is applied to the AIPAA, the predicted beam scanning angle value will be 38.4.deg.. Each ILCO gives good frequency stability and lower AM, FM, and PM noise charactheristics in the mutual coupling lockingmode. The ILCO can not only play a part as the phase shifter for the AIPAA but it can also be usedas the power combining device in the mm-wave frequency range and as a part of a T/R MMIC module.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.53-60
• /
• 2018

The purpose of this study was investigating the effect of 3D printing technology that changes the speed of sound (SOS) and the broadband ultrasound attenuation (BUA) by controlling the density of the media phantom. We used 3D printers which called additive manufacturing (AM) by using material with polylactic acid (PLA). The inside of the medium phantom was filled crossly with 100%, 90%, 80%, 70%, 60%, and 50% of the material. The ultrasonic instrument measured the SOS and the BUA using a 0.55 MHz ultrasound output in opposing mode with a pair of transducers. As a result, the density of the medium phantoms with the SOS showed very high correlation (r = 0.944), but the SOS showed very low correlation (r = 0.500). It is expecting that the manufacturing and measurement method of the medium phantom using 3D printing technology will be used as basic data for ultrasonic bone mineral density.

• Animal Systematics, Evolution and Diversity
• /
• v.24 no.1
• /
• pp.81-88
• /
• 2008

Two oxytrichid ciliates collected from the mosses and estuarine littoral in Korea were identified as Oxytricha longigranulosa Berger and Foissner, 1989 and O. marina Kahl, 1932. These species are reported for the first time from Korea. The description was based on living and protargol impregnated specimens. Diagnostic characters for each species are as follows. Oxytricha longigranulosa: Cell in vivo $80-115{\times}30-50{\mu}m$, mostly $90{\times}40{\mu}m$. Length/width ratio about 2.4/1. Cortical granules about $1{\times}1.5{\mu}m$ in size, colorless, arranged in short and discontinued longitudinal rows. Four frontoventral cirri. Adoral zone of membrane lies (AZM) covering 30-50% of cell length with 25-27 adoral membranelles (AM). Buccal area flat, typical Oxytricha pattern. Five transverse cirri, 19-23 right marginal cirri, 19-24 left marginal cirri, three caudal cirri, five dorsal kineties. Two macronuclear nodules 2 in number and spherical in shape, two micronuclei in number. Oxytricha marina: Cell in vivo $100-150{\times}30-60{\mu}m$. Cytoplasm colorless without cortical granules. Four frontoventral cirri. AZM covering 50% of cell length with 28-44 AMs, Buccal area flat, typical Oxytricha pattern. Five transverse cirri, 23-38 right marginal cirri, 19-25 left marginal cirri, three caudal cirri, five dorsal kineties. Two macronuclear nodules and spherical in shape, 1-5 micronuclei, mostly two in number.