• 한국주조공학회지
• /
• 제36권6호
• /
• pp.215-221
• /
• 2016

In a recent study, the microstructures and mechanical properties of AM80-xSn magnesium alloys with semi solid casting and hot extrusion process were investigated. With increasing Sn content, the amount of ${\beta}$(Mg2Sn) phase increased, while the ${\alpha}-Mg$ dendritic size decreased. The hardness was increased by the Mg2Sn as the Sn content increased. With increasing Sn content, permanent mold cast and semi solid cast AM80 Mg alloy showed less reduction of hardness and also of extruded AM80 Mg alloy after annealing. In the case of the mechanical properties, the extruded semi solid casting AM80 Mg alloy showed higher tensile strength and yield strength with increasing Sn content compared to the extruded permanent mold cast AM80 Mg alloy at room temperature.

• 소성∙가공
• /
• 제27권6호
• /
• pp.379-385
• /
• 2018

This study investigated the effect of extrusion conditions on microstructures and mechanical properties of AM80 magnesium alloys. The billets of magnesium alloy used for hot extrusion were prepared by permanent mold casting method, and its extrusion was hot direct extrusion with different extrusion conditions. The results of microstructural analysis showed that the main phases in the as-casted alloys were ${\alpha}-Mg$, ${\beta}-Mg_{17}Al_{12}$, and lamella $Mg_{17}Al_{12}$. Hot extrusion results, The tensile strength of the most soundly manufactured extruded bars (extrusion temp: $350^{\circ}C$, extrusion ratio: 27:1, ram speed: 2mm/s) was approximately 327MPa at room temperature. The increase in the mechanical properties of hot-extruded alloys was as a result of grain refinement by dynamical recrystallization during hot extrusion.

• 한국주조공학회지
• /
• 제32권1호
• /
• pp.44-49
• /
• 2012

In this study, three magnesium alloys were investigated; those are 1.5wt.% CaO added AM80, 1.0wt.% CaO added AM60, and conventional MRI153 alloys. Test specimens of three alloys were prepared by re-melting and casting into steel mold with ingots and machining. The mechanical properties and the creep behavior at 150 degrees Celsius of these specimens were determined and their microstructures were characterized using OM and SEM. For the application to die-casting, fluidity test were carried out with spiral mold. Compared with 1.0wt.% CaO added AM60 alloy, 1.5wt.% CaO added AM80 alloy exhibited good creep properties in all test conditions. Moreover, CaO added alloys showed better creep properties than MRI153 alloy at lower load condition. It is proposed that 1.5wt.% CaO added AM80 alloy is useful to apply to power-train parts such as transmission case in vehicles.

• BMB Reports
• /
• 제40권1호
• /
• pp.65-71
• /
• 2007

The Helicoverpa armigera nucleopolyhedrovirus (HearNPV) ORF80 (ha80) has 765 bp encoding a protein with approximately 254 amino acids and a predicted molecular weight of 30.8 kDa. Homologues of ha80 are found in most baculovirus sequences, including those from lepidopteran NPVs, lepidopteran granuloviruses (GVs), hymenopteran baculoviruses, and one dipteran baculovirus, yet their functions remain unclear. In this study we characterized ha80, and showed that it was transcribed late in infected host cells (HzAM1). The product of ha80 was a 31 kDa protein that was not a structural protein of budded virus (BV) or occlusion-derived virus (ODV) particles. Ha80 was first detected in the cytoplasm of infected HzAM1 cells at 12 h p.i., and was observed in the nucleus at later stages of infection, suggesting that it may be involved in transporting viral proteins into the host cell nucleus or play its roles in the nucleus.

• 한국어병학회지
• /
• 제9권2호
• /
• pp.195-201
• /
• 1996

군산근교의 양만장에서 애드와드병에 이환된 뱀장어로부터 총 96균주의 E.tarda균을 분리한 후 이들 분리균의 약제감수성 검사를 실시하고 아울러 내성균의 내성인자 전달 시험을 실시하였다. 공시한 모든 균주는 SM, AK, NF 및 GM등에는 100% 감수성을 보였으나, 대부분의 균주가 SD(86균주), AM(84균주), PM(80균주), NA(67균주), OT(44균주) 및 OA(37균주) 등의 내성을 보였다. 내성유형은 20유형으로서 거의 모든 균주가 2제 이상의 다제내성을 보였으며, 그중 SD-AM-PM-NA-OA(16균주), SD-AM-PM-NA(14균주), SD-AM-PM-NA-OT-OA(12균주), SD-AM-PM-OT(10균주) 및 SD-AM-PM-NA-OT(8균주) 유형등이 고빈도로 출현하였다. 내성균주의 내성인자 전달 빈도는 94균주중에서 78균주가 단계에서 6제까지의 다제내성인자의 전달을 보였다. 그중 AM 및 AM-PM-NA유형(8균주), PM,SD 및 AM-SD유형(6균주), AM-PM, PM-SD 및 AM-SD-OT유형(4균주)등이 고빈도 출현을 보였다. 이러한 결과는 양만장에서 다양한 항균제를 사용하였기 때문에 다제내성현상이 확산되어진 것으로 사료된다.

• 방사성폐기물학회지
• /
• 제5권2호
• /
• pp.123-132
• /
• 2007

본 연구는 실제 HLW 수준의 다성분 계 모의 용액으로부터 $Zr-DEHPA/NDD-HWO_3$ 금속함유 추출 계에 의한 Am-Cm/RE 원소의 공분리 및 이의 상호분리 연구를 수행하였다. 우선 금속함유 추출제인 Zr-DEHPA를 자체 제조하고, 제 3상 방지 조건 결정과 질산 농도, DEHPA 농도, Zr 함유량 등이 공추출에 미치는 영향을 평가하여 최적 조건으로 (15g/L Zr-1M DEHPA)/NDD-1M $HNO_3$ 추출 계를 설정하였다. 이때 추출률은 Am (81%), Cm (85%), RE 원소 (80% 이상), Mo (98%), Fe (85%), U (98%), Np (73%), 기타 원소 (5% 이하) 등으로 Am-Cm/RE의 공분리 적용성은 양호하나, U, Np, Mo, Fe의 선제거가 필요하고 특히 제 3상 형성 유발 물질인 Zr이 거의 함유되지 않아야 한다. 그리고 공추출된 Am-Cm/RE를 Am-Cm (역추출제 : 0.05M DTPA-1M Lactic acid-pH 3.6)${\rightarrow}RE$ (역추출제 : 5M $HNO_3$) 순으로 상호 분리하여 각각의 분리계수를 평가하였으며 이때 Am은 65.4%, Cm은 63.9% RE 원소(Y 제외)는 85% 이상이 역추출 되었다.

• Biomolecules & Therapeutics
• /
• 제8권4호
• /
• pp.332-337
• /
• 2000

Physicochemical properties of aspalatone (acetylsalicylic acid maltol ester, AM), which has been recently found to have an antithrombotic effect, were studied in terms of solubility, dissolution, partition coefficient (Pc) and stability. The solubility of AM at 37$^{\circ}C$ was about 1.2 mg/ml and the P$_{c}$ value for n-octanol/water and chloroform/water was 11.4 and 382.6, respectively. Dissolution rates of AM at pH 1.2 and 6.8 were more than 80% within 30 min. The degradation of AM followed apparent first-order kinetics, and was dependent on temperature, pH and ionic strength. From the pH-rate profile, the optimal pH was found to be at around 4.0. Half-lives at pH 1.2 and 6.8 were 33.5 and 44.4 hr, respectively. The degradation rate of AM at pH 1.2 was somewhat faster than that of aspirin, but at pH 7.0, the degradation rate of AM was slower than that of aspirin.n.

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2261-2266
• /
• 2009

본 논문에서는 비선형 증폭기의 위상 오차의 보정 방법을 채용한 시스템을 제안하였다. 간단한 위상 벡터의 적응형 응답 방식을 이용하여, 다양한 입력 전력 변화에 대해 매우 큰 폭의 AM/PM 왜곡 감소 효과를 얻을 수 있었다. 제안된 방법은 다양한 위상 오차 변화 환경에 대해 본 보정 시스템을 채용하지 않았을 경우와 비교하여, AM/PM 왜곡을 최대 80 %까지 감소시킬 수 있는 것으로 평가되었다. 또한 추가적으로 입력 신호에 대한 포락선 보상 기법을 추가하여 출력 신호의 인접채널 전력 비율의 향상시킨 결과를 보였다.

• 한국통신학회논문지
• /
• 제4권1호
• /
• pp.43-46
• /
• 1979

地域的으로 相異하게 發生하는 落雷는 6~9月이 至體의 80%를 차지하였고 山頂에 雷事故가 많았다. AM放送 안테나는 大地固有抵抗이 적은 곳인 粘土의 平野지대에 置局해야 하고 高周波 Choke, Sphere gap(75,000 V/inch) 그리고 反射電力檢出리레이 등을 設置하여 雷事故를 줄일 수 있음을 確認했다.

• 혜화의학회지
• /
• 제13권2호
• /
• pp.259-265
• /
• 2004

Objective; This study was designed to investigate the effect of Sa-am acupuncture and Arctii Fructus water extract on Post-herpetic Neuralgia. Method: We have treated them with acupuncture treatment of Sa-am acupuncture and Arctii Fructus water extract and evaluated the effect by Pain Rating Score(P.R.S.) and Visual Analogue Scale(V.A.S.) scale. Result: Before theraphy, the grades of Song's scale were P.R.S. 80 and V.A.S. 100, Kim's sclae's P.R.S. 77 and V.A.S. 100. After theraphy, the grades of song's scale were P.R.S. 5 and V.A.S. 10, Kim's scales's P.R.S. 10 and V.A.S. 10 Conclusion: The treatment of Sa-am-acupuncture and Arctii Fructus water extract on Post-herpetic Neuralgia was effective and will be attempted to the patients with it.