• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권3호
• /
• pp.188-196
• /
• 2004

Amplifier linearity plays a major role in the quality of mordern communication systems. The Power amplifier should be operated near saturation region to achieve high efficiency But at this region amplitude and phase distortions of the amplifier remarkably increase with the input power increase and cause a significant adjacent channel interference. In this paper, an independently controllable AM/AM and AM/PM predistortion linearizers consisted of two bias feed resistance linearizers is proposed. This linearizer allows independent adjustment of the AM/AM and AM/PM curves by using two adjustable voltages to compensate tile power amplifier non-linearities. The predistortion linearizer can improve the ACPR by 5.3dB with cdma2000 multi carrier signals. And by applying this linearizer to two-tone(880MHz) power amplifier, third order IMD products are improved up to 8(dB).

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.42-50
• /
• 2019

3D printing AM processes have advantages in complex shapes, customized fabrication and prototype development stage. However, due to various parameters based on both the machine and the material, the AM process can produce finished output after several trials and errors in the initial stage. As such, minimizing or optimizing negative factors for various parameters of the 3D printing AM process could be a solution to reduce the trial-and-error failures in the early stages of such an AM process. In addition, this can be largely solved through software simulation in the preprocessing process of 3D printing AM process. Therefore, the objective of this study was to investigate a simulation technology for the AM software, especially Ansys Inc. The metal 3D printing AM process, the AM process simulation software, and the AM process simulation processor were examined. Through this study, it will be helpful to understand 3D printing AM process and AM process simulation processor.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.51-58
• /
• 2019

The objective of this study was to investigate a simulation technology for the AM field based on ANSYS Inc.. The introduction of metal 3D printing AM process, and the examining of the present status of AM process simulation software, and the AM process simulation processor were done in the previous study (part 1). This present study (part 2) examined the use of the AM process simulation processor, presented in Part 1, through direct execution of Topology Optimization, Ansys Workbench, Additive Print and Additive Science. Topology Optimization can optimize additive geometry to reduce mass while maintaining strength for AM products. This can reduce the amount of material required for additive and significantly reduce additive build time. Ansys Workbench and Additive Print simulate the build process in the AM process and optimize various process variables (printing parameters and supporter composition), which will enable the AM to predict the problems that may occur during the build process, and can also be used to predict and correct deformations in geometry. Additive Science can simulate the material to find the material characteristic before the AM process simulation or build-up. This can be done by combining specimen preparation, measurement, and simulation for material measurements to find the exact material characteristics. This study will enable the understanding of the general process of AM simulation more easily. Furthermore, it will be of great help to a reader who wants to experience and appreciate AM simulation for the first time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2690-2692
• /
• 2003

Amplifier linearity plays a major role in the design of mordern communication systems. An independently controllable AM/AM and AM/PM predistortion linearizers that consists of two bias feed resistance linearizers is proposed. This linearizer allows independent adjustment of the AM/AM and AM/PM curves by using two adjustable voltages to compensate the power amplifier non-linearities. The predistortion linearizer can improve the ACPR by SdB with cdma2000 multi carrier signals. By applying this linearizer to two-tone 880MHz power amplifier, an improvement of adjacent channel leakage power up to 5dBm has been achieved.

• 한국재료학회지
• /
• 제8권9호
• /
• pp.797-801
• /
• 1998

Diglycidy1 ether of bisphenol A (DEGBA)/4, 4'-methylene dianiline(MDA) 계의 반응속도에 미치는 10 phr의 pheny1 glycidy1 ether(PGE)-acetamide(AcAm)의 영향을 살펴보았다. PGE-AcAm이 첨가됨으로 인해서 승온적 DSC 곡선에서 최대 발열피크의 온도와 피크 시작 온도가 감소하였다. PGE-AcAm의 첨가 여부에 관계없이 전화율 곡선은 s-자 형상이었고, 이는 DGEBA/MDA 계와 DGEBA/MDA/PGE-AcAm 계가 자촉대 반응을 한다는 것을 의미한다. 또한 PGE-AcAm이 10 phr 첨가됨으로 인해서 1.2-1.4배 증가하였는데, 이는 PGE-AcAm의 수산기가 촉매로 작용하기 때문이다.

• 대한전자공학회논문지
• /
• 제13권5호
• /
• pp.24-29
• /
• 1976

Phase locked AM신호 검파방식에서는 위상고정회로를 사용하여 입력신호로부터 반송신호를 분리 재생시킨다. 입력잡음은 백색 Gaussian잡음이고, 전려제어발진기의 자유발진주파수와 입력반송신호주파수가 같다는 가정하에 위상고정회로의 동작특성을 해석하고, 본 검파방식의 신호대 잡음비를 정량적으로 고찰하였다. Phase locked AM신호 검파방식은 종래의 검파방식에 비해서 잡음의 영향을 적게 받게됨을 본 해석에서 알 수 있다. In the phase locked AM signal detection, phase locked loop is used to extract a synchronous carrier from an input AM signal. Under the assumption that input noise is white Gaussian and free-running frequency of voltage controlled oscillator is the same that of an input carrier, operational behaviours of phase locked loop is analyzed and signal to noise ratio of the detection is derived quentitatively. The results show that the phase locked AM signal detection method offers a higher degree of noise mmunity than conventional AM signal detections.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.494-507
• /
• 2017

A three-dimensional physical part can be fabricated from a three-dimensional digital model in a layer-wise manner via additive manufacturing (AM) technology, which is different from the conventional subtractive manufacturing technology. Numerous studies have been conducted to take advantage of the AM opportunities to penetrate bespoke custom product markets, functional engineering part markets, volatile low-volume markets, and spare part markets. Nevertheless, materials issues, machines issues, product issues, and qualification/certification issues still prevent the AM technology from being extensively adopted in industries. The present study briefly reviews the standard classification, technological structures, industrial applications, technological advances, and qualification/certification activities of the AM technology. The economics, productivity, quality, and reliability of the AM technology should be further improved to pass through the technology adoption lifecycle of innovation technology. The AM technology is continuously evolving through the introduction of PM materials, hybridization of AM and conventional manufacturing technologies, adoption of process diagnostics and control systems, and enhanced standardization of the whole lifecycle qualification and certification methodology.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.309-317
• /
• 2019

This study evaluated the kinetics of acrylamide (AM) biodegradation by mixed culture bacteria and Enterobacter aerogenes (E. aerogenes) in sequencing batch reactor (SBR) systems with AQUASIM and linear regression. The zero-order, first-order, and Monod kinetic models were used to evaluate the kinetic parameters of both autotrophic and heterotrophic nitrifications and both AM and chemical oxygen demand (COD) removals at different AM concentrations of 100, 200, 300, and 400 mg AM/L. The results revealed that both autotrophic and heterotrophic nitrifications and both AM and COD removals followed the Monod kinetics. High AM loadings resulted in the transformation of Monod kinetics to the first-order reaction for AM and COD removals as the results of the compositions of mixed substrates and the inhibition of the free ammonia nitrogen (FAN). The kinetic parameters indicated that E. aerogenes degraded AM and COD at higher rates than mixed culture bacteria. The FAN from the AM biodegradation increased both heterotrophic and autotrophic nitrification rates at the AM concentrations of 100-300 mg AM/L. At higher AM concentrations, the FAN accumulated in the SBR system inhibited the autotrophic nitrification of mixed culture bacteria. The accumulation of intracellular polyphosphate caused the heterotrophic nitrification of E. aerogenes to follow the first-order approximation.

• Nuclear Engineering and Technology
• /
• 제14권4호
• /
• pp.172-177
• /
• 1982

pH변화 5~10 범위에서 $10^{-5}$M Am 수용액의 상태를 여과법 및 인심분리법에 의하여 조사하였다. 이 실험에서 Am의 가능한 가수분해 생성물 및 용해도 상수를 추정할 수 있었다. 이때 Baes 및 Mesmer에 의하여 이론적으로 계산한 Am(OH)$_3$의 용해도를 약 10배 증가하면 즉 log k=-18.7를 log k=-17.5로 변화시키면 계산에 의한 PH변화에 따른 Am농도곡선은 실험치와 완전히 일치하였다.

• 한국어병학회지
• /
• 제9권2호
• /
• pp.195-201
• /
• 1996

군산근교의 양만장에서 애드와드병에 이환된 뱀장어로부터 총 96균주의 E.tarda균을 분리한 후 이들 분리균의 약제감수성 검사를 실시하고 아울러 내성균의 내성인자 전달 시험을 실시하였다. 공시한 모든 균주는 SM, AK, NF 및 GM등에는 100% 감수성을 보였으나, 대부분의 균주가 SD(86균주), AM(84균주), PM(80균주), NA(67균주), OT(44균주) 및 OA(37균주) 등의 내성을 보였다. 내성유형은 20유형으로서 거의 모든 균주가 2제 이상의 다제내성을 보였으며, 그중 SD-AM-PM-NA-OA(16균주), SD-AM-PM-NA(14균주), SD-AM-PM-NA-OT-OA(12균주), SD-AM-PM-OT(10균주) 및 SD-AM-PM-NA-OT(8균주) 유형등이 고빈도로 출현하였다. 내성균주의 내성인자 전달 빈도는 94균주중에서 78균주가 단계에서 6제까지의 다제내성인자의 전달을 보였다. 그중 AM 및 AM-PM-NA유형(8균주), PM,SD 및 AM-SD유형(6균주), AM-PM, PM-SD 및 AM-SD-OT유형(4균주)등이 고빈도 출현을 보였다. 이러한 결과는 양만장에서 다양한 항균제를 사용하였기 때문에 다제내성현상이 확산되어진 것으로 사료된다.