• Title/Summary/Keyword: ALTITUDE CHANGE

Search Result 306, Processing Time 0.024 seconds

A Study on the Steady-State Characteristics of Symmetric Pintle Nozzle with Varying Position of Pintle and Change in Altitude (대칭형 핀틀 노즐의 핀틀 위치와 고도 변화에 대한 정상상태 특성 연구)

  • Jeong, Kiyeon;Kang, Dong-Gi;Jung, Eunhee;Lee, Daeyeon;Choi, JaeSung
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.23 no.1
    • /
    • pp.33-45
    • /
    • 2019
  • In this study, numerical simulations were performed to investigate the steady-state characteristics of a symmetric pintle nozzle by varying the position of the pintle and the altitude. The pintle nozzle shape was used in a linear pintle nozzle that had been analyzed prior to the study, and the boundary conditions of the chamber were considered to be according to the propellant burn-back characteristics. A software was used to perform a verification analysis of the square nozzle, pintle nozzle, and high-altitude conditions with an appropriate analytical technique. The pintle position had three different nozzle throat area conditions-: fully closed, half open, and fully open, and the altitude was set at 0, 5, and 20 km. The study compared the thrust, pintle drive load, and static stability at each condition.

Estimation on Altitudinal Spectrum of Suitability for Four Species of the Mayfly Genus Ephemera (Ephemeroptera: Ephemeridae) Using Probability Distribution Models (확률분포모형을 이용한 하루살이속(Ephemera) 4종의 고도구배에 따른 서식처적합도 평가)

  • Dongsoo Kong;Bomi Kang
    • Journal of Korean Society on Water Environment
    • /
    • v.39 no.4
    • /
    • pp.302-315
    • /
    • 2023
  • Distribution characteristics and altitudinal gradient of four species (E. strigata, E. separigata, E. orientalis-sachalinensis group) of the mayfly genus Ephemera (Order Ephemeroptera) were analyzed with probability distribution models (exponential, normal, lognormal, logistic, Weibull, gamma, beta, Gumbel). Data was collected from 23,846 sampling units of 6,787 sites in Korea from 2010 to 2021. The beta distribution model showed the best fit for positively skewed E. orientalis-sachalinensis and little-skewed E. strigata along with altitudinal gradient. The reversed lognormal distribution model showed the best-fit for negatively skewed E. separigata. E. orientalis-sachalinensis distributed at the range of altitude 1~700 m (mean 251 m, median 226 m, mode 124 m, and standard deviation 161 m), E. strigata distributed at the range of altitude 5~871 m (mean 474 m, median 478 m, mode 492 m, and standard deviation 200 m), E. separigata distributed at the range of altitude 7~846 m (mean 620 m, median 659 m, mode 760 m, and standard deviation 181 m). Altitudinal habitat suitability ranges were estimated to be 42~257 m for E. orientalis-sachalinensis, 335~644 m for E. strigata, and 641~824 m for E. separigata. Based on the altitudinal spectrum of suitability and altitude-related temperature analysis results, E. orientalis-sachalinensis was estimated to be thermophilic, E. strigata to be mesophilic, and E. separigata to be thermophobic. This is the first national-scale evaluation of the altitudinal distribution of Ephemera in Korea. These results will be used in a further research study on altitudinal shift of the species of Ephemera under climate change.

The feasible constant speed helical trajectories for propeller driven airplanes

  • Labonte, Gilles
    • Advances in aircraft and spacecraft science
    • /
    • v.4 no.4
    • /
    • pp.371-399
    • /
    • 2017
  • The motion of propeller driven airplanes, flying at constant speed on ascending or descending helical trajectories is analyzed. The dynamical abilities of the airplane are shown to result in restrictions on the ranges of the geometrical parameters of the helical path. The physical quantities taken into account are the variation of air density with altitude, the airplane mass change due to fuel consumption, its load factor, its lift coefficient, and the thrust its engine can produce. Formulas are provided for determining all the airplane dynamical parameters on the trajectory. A procedure is proposed for the construction of tables from which the flyability of trajectories at a given angle of inclination and radius can be read, with the corresponding minimum and maximum speeds allowed, the final altitude reached and the amount of fuel burned. Sample calculations are shown for the Cessna 182, a Silver Fox like unmanned aerial vehicle, and the C-130 Hercules.

An Airborne Cycloidal Wind Turbine Mounted Using a Tethered Balloon

  • Hwang, In-Seong;Kang, Wang-Gu;Kim, Seung-Jo
    • International Journal of Aeronautical and Space Sciences
    • /
    • v.12 no.4
    • /
    • pp.354-359
    • /
    • 2011
  • This study proposes a design for an airborne wind turbine generator. The proposed system comprises a cycloidal wind turbine adopting a cycloidal rotor blade system that is used at a high altitude. The turbine is mounted on a tethered balloon. The proposed system is relatively easier to be realized and stable. Moreover, the rotor efficiency is high, which can be adjusted using the blade pitch angle variation. In addition, the rotor is well adapted to the wind-flow direction change. This article proves the feasibility of the proposed system through a sample design for a wind turbine that produces a power of 30 kW. The generated wind power at 500 m height is nearly 3 times of that on the ground.

Analysis of Drone Target Search Performance According to Environment Change

  • Lim, Jong-Bin;Ha, Il-Kyu
    • Journal of Korea Multimedia Society
    • /
    • v.22 no.10
    • /
    • pp.1178-1186
    • /
    • 2019
  • In recent years, interest in drones has grown, and many countries are developing them into a strategic industry of the future. Drones are not only used in industries such as logistics and agriculture but also in various public sectors such as life rescue, disaster investigation, traffic control, and firefighting. One of the most important tasks of a drone is to accurately identify targets in these applications. Target recognition may vary depending on the search environment of the drone. Therefore, this study tests and analyzes the drone's target recognition performance according to changes in the search environment such as the search altitude and the search angle. In addition, we propose a new algorithm that improves upon the disadvantages of the Haar cascade method, which is the existing algorithm that recognizes the target by analyzing a captured image.

Environment of Optimal Location of the Dwelling in Unseo-dong Relics Group, Yeongjong-do, Incheon in the Neolithic Age - In Terms of Geographical and Geomorphological Characteristics - (인천 영종도 운서동유적그룹의 신석기시대 주거지 최적 입지환경 - 지리 및 지형학적 관점에서 -)

  • Park, Ji Hoon;Lee, Ae Jin
    • Journal of The Geomorphological Association of Korea
    • /
    • v.20 no.3
    • /
    • pp.15-25
    • /
    • 2013
  • The purpose of this study is to identify the environment of optimal location of the dwelling (hereafter referred as dwelling site) in the Neolithic Age found in Unseo-dong relics group, Yeongjong-do, Incheon from the geographical and geomorphological perspectives. For this purpose, micro-landform, altitude, gradient, distance from the river of water available for use and the difference between the highest altitude and lowest altitude of river bed of water available for use based on change of dwelling site over periods were analyzed targeting ground surface of hills where individual dwelling sites (a total of 68 sites) discovered in investigation area so far. As a result, it was shown that the Upper sideslope were selected as the primary dwelling location standard in investigation area where the Neolithic people lived upon selecting the dwelling site (or settlement). In addition, the ground surface of dwelling site had the altitude of 21-31m and slope of $5-10^{\circ}$ (gentle slope) as the secondary and it had distance of 514-549m from the river of water available for use and difference of 11-23m between the highest altitude and lowest altitude of river bed of water available for use. Thus, it was shown that the space to get water relatively easy from two places at the same time was the secondary dwelling location standard.

The Change of Vegetation Structure by Slope and Altitude in Taebaeksan Provincial Park (태백산도립공원의 사면 및 해발고별 식생구조 변화)

  • Lee, Sang-Cheol;Kang, Hyun-Mi;Choi, Song-Hyun;Park, Seok-Gon;Yu, Chan-Yeol
    • Korean Journal of Environment and Ecology
    • /
    • v.30 no.3
    • /
    • pp.376-385
    • /
    • 2016
  • Through the vegetation survey of Geumcheon Valley on the south-facing slope and the other side of the valley, Jedanggol on the north-facing slope in Taebaeksan Provincial Park, the characteristics of vegetation structure and change by slope and altitude were examined. From Geumcheon Valley(850m) via the ridge(1,380m) to Jedanggol(950m), thirty plots at intervals of 50m altitude were selected for investigation. According to the results of the analysis, Acer pictum subsp. mono, Fraxinus rhynchophylla, Betula davurica and Lindera obtusiloba were observed only in the south-facing slope, while Sorbus commixta, Prunus padus, Prunus maackii and Acer komarovii were observed only in the north-facing slope. However, Quercus mongolica, Betula costata, Cornus controversa, Tilia amurensis, Acer pseudosieboldianum and Magnolia sieboldii were found to be distributed over both the slopes. The analysis of ordination found that the vegetation was distributed discontinuously by slope. Especially, the vegetation of the north-facing slope appeared to be affected by the direction that the slope faces. Quercus mongolica community, which is the dominant species at an altitude of over 1,200m, was determined to be affected by elevation factor. The maximum age of the major trees was as follows: Betula costata and Quercus mongolica were estimated to be 53-year-old and 113-year-old respectively.

On wave propagation of football ball in the free kick and the factors affecting it

  • Xumao Cheng;Ying Wu
    • Steel and Composite Structures
    • /
    • v.46 no.5
    • /
    • pp.669-672
    • /
    • 2023
  • In this research, the researcher has examined the factors affecting the movement of the soccer ball and will show that the effects such as air resistance, altitude above sea level, wind, air pressure, air temperature, air humidity, rotation of the earth, changes in the earth's gravitational acceleration in different areas. It, the geographical length and latitude of the launch point, the change of gravitational acceleration with height, the change of pressure with height, the change of temperature with height and also the initial spin (Magnus effect) affect the movement of projectiles (especially soccer ball). We modelled th ball based on shell element and derive the motion equations by energy method. Finally, using numerical solution, the wave of the ball is studied. The influences of various parameters are investigated on wave propagation of the ball. Therefore, in short, it can be said that the main factors that play a major role in the lateral deviation of the hit ball are the initial spin of the ball and the wind.

A Study of the Butterfly Community of Mt. Gyeryong National Park, Korea (계룡산국립공원의 나비류 군집에 관한 연구)

  • Jeon, Sung-Jae;Cho, Young-Ho;Han, Yong-Gu;Kim, Young-Jin;Choi, Min-Joo;Park, Young-Jun;Nam, Sang-Ho
    • Korean Journal of Environment and Ecology
    • /
    • v.26 no.3
    • /
    • pp.348-361
    • /
    • 2012
  • Altitude is a factor that plays an important role in the diversity, richness and composition of species. Recently, much attention has been paid to the distribution of butterflies and insects according to altitude. The purpose of this article is to propose a method to preserve and manage species efficiently by reviewing the distribution of butterflies according to different altitudes in Mt. Gyeryong National Park. This study found that the number of species and individuals decreased as the altitude increased, possibly due to the increased amount of shade caused by the crown density. When analyzing the factors influencing the distribution of species other than altitude, it was found that the slope, vegetative colonies and hydrosphere distance were correlated with the change in species distribution. As these species are closely related to food plants, it may save time and reduce the cost as well as allow an efficient evaluation of the bio-diversity if these species are selected as biological indicator species suitable for detecting the changes in the forest. It is judged to be a more efficient means of species preservation to accumulate and quantify the materials regarding environmental elements such as the climate, microclimate and food plants, as this would allow the butterfly distribution to be estimated.

Research Trends of an E-D Nozzle for Altitude Compensation (고도 보정용 확장-굴절(E-D) 노즐의 국외 연구 동향)

  • Moon, Taeseok;Park, Sanghyeon;Choi, Junsub;Huh, Hwanil
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.45 no.10
    • /
    • pp.844-854
    • /
    • 2017
  • The Expansion-Deflection(E-D) nozzle is a nozzle that has a performance gain through the altitude compensation effect by changing the effective area within the nozzle according to the altitude. An E-D nozzle has been known to reduce the length of the nozzle and achieve the payload gain of the launch vehicle. Due to the potential advantages of an E-D nozzle, related research has been carried out in the United Kingdom, Germany, Australia and Europe etc. In the UK, the flow characteristics of the E-D nozzle and the performance comparison with the dual-bell nozzle which is altitude compensation nozzle were studied. In order to understand the transition characteristics of the E-D nozzle in DLR, the transition characteristics according to the nozzle pressure ratio change were analyzed. In Europe, numerical study using the E-D nozzle concept on upper stage of the launch vehicle Ariane 5 ESC-B was carried out to confirm the possibility of payload gain according to the nozzle length reduction. In this paper, research trends of an E-D nozzle performed outside the country are classified and analyzed according to their characteristics and utilized as basic data of E-D nozzle research in the future.