• Korea-Australia Rheology Journal
• /
• 제18권2호
• /
• pp.109-118
• /
• 2006

A finite-element method was employed to analyze axisymmetric unsteady motion of a deformable bubble near the wall. In the present study a deformable bubble in a Newtonian medium near the wall was considered. In solving the governing equations a structured mesh generator was used to describe the collapse of highly deformed bubbles with the Arbitrary Lagrangian Eulerian (ALE) method being employed in order to capture the transient bubble boundary effectively. In order to check the accuracy of the present FE analysis we compared the results of our FE solutions with the result of the collapse of spherical bubbles in a large body of fluid in which solutions can be obtained using a 1D FE analysis. It has been found that 1D and 2D bubble deformations are in good agreement for spherically symmetric problems confirming the validity of the numerical code. Non-spherically symmetric problems were also solved for the collapse of bubble located near a plane solid wall. We have shown that a microjet develops at the bubble boundary away from the wall as already observed experimentally. We have discussed the effect of Reynolds number and distance of the bubble center from the wall on the transient collapse pattern of bubble.

• 한국전산유체공학회지
• /
• 제4권2호
• /
• pp.39-46
• /
• 1999

The FVM(Finite Volume Method) have been used mainly for the flow analyses in the piston-cylinder. The objective of the present study is to analyze numerically the piston-driven intake flows using the FEM(Finite Element Method). The FEM algorithm used in this study is 4-step time-splitting method which requires much less execution time and computer storage than the velocity-pressure integrated method and the penalty method. And the explicit Lax-Wendroff scheme is applied to nonlinear convective term in the momentum equations to prevent checkerboard pressure oscillations. Also, the ALE(arbitrary Lagrangian Eulerian) method is adopted for the moving grids. The calculated results show good agreement in comparison with those by the FVM and the experimental results by the LDA.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.247-250
• /
• 2007

Flexible media such as the paper, the film, etc. are thin, light and very flexible. They behave in geometrically nonlinear. Any of small force makes large deformation. So we must including aerodynamic effect when its behavior is predicted. Thus, it becomes fully coupled fluid-structure interaction(FSI) problem. In FSI problems, where the fluid mesh near the structure undergoes large deformations and becomes unacceptably distorted, which drive the time step to a very small value for explicit calculations, the arbitrary Lagrangian-Eulerian(ALE) methods or rezoning are used to create a new undistorted mesh for the fluid domain, which allows the calculations to continue. In this paper, FE sheet model considering geometric nonlinearity is formulated to simulate the behavior of the flexible media. Aerodynamic force to the media by surrounding air is calculated by solving the incompressible Navier-Stokes equations. Q2Q1(Taylor-Hood) element which means biquadratic for velocity and bilinear for pressure is used for fluid domain. Q2Q1 element satisfies LBB condition and any stabilization technique is not needed. In this paper, cantilevered sheet in the viscous incompressible Navier-Stokes flow is simulated to check the mesh motion and numerical integration scheme, and then falling paper in the air is simulated and the effects of some representative parameters are investigated.

• 한국전산구조공학회논문집
• /
• 제36권6호
• /
• pp.355-364
• /
• 2023

폭발 수치해석 기법 중 Arbitrary Lagrangian-Eulerian(ALE)는 구조물의 파괴뿐만 아니라 폭발 이후 충격파의 전파 과정까지 관찰할 수 있는 장점이 있다. 그러나 동적 해석 시 유한요소 모델의 격자망 크기가 일정 수준 이하로 감소하게 되면 해석 결과의 신뢰도가 부정확해진다. 본 연구에서는 ALE 수치해석 기법을 활용하여 대기의 격자망 크기가 해석의 정확도에 미치는 영향을 조사한다. 다양한 조건의 격자망 크기와 폭발 중량을 갖는 대기 중 폭발모델을 구축하고, 폭발 중심으로부터 거리에 따른 폭발압력을 관찰한다. 수치해석과 실험에서 얻은 최대 폭발압력 결과에 대해 평균 제곱 오차를 계산하여 최적의 격자망 크기를 제안하고, 제안된 크기를 바탕으로 폭발물 중량과 대기의 최적 격자망 크기에 대한 상관관계를 분석한다. 본 연구는 다양한 중량을 가진 폭발물 해석에서 최적의 격자망 크기를 제공함으로써 신뢰성이 향상된 폭발 수치해석 모델 개발에 도움이 될 것으로 기대한다.

• 소성∙가공
• /
• 제7권1호
• /
• pp.72-80
• /
• 1998

This study is concerned with the thermo-biscoplastic finite element analysis of hot tube extrusion through square dies with a mandrel. The problem is treated as a non-steady state and the ALE description is used due to abruptly turning flow at the die aperture. Since the contact heat transfer coefficient and the friction factor are required in the analysis experiments are also carried out to determine the values, In order to apply ceramics to an extrusion die the study is focussed on under-standing the characteristics of the process. The simulated results provide the useful informations such as metal flow temperature distribution stress state etc. The elastic analysis of the dies is carried out to obtain the stress state of the ceramic dies.

• International Journal of Contents
• /
• 제12권4호
• /
• pp.8-16
• /
• 2016

This research proposes the composition logic of an Active Learning Environment (ALE), to enable discovery by learning through experience, whilst increasing knowledge about modern architectural heritage. Linking information to the historical heritage using Information and Communication Technology (ICT) helps to overcome the limits of previous learning methods, by providing rich learning resources on site. Existing field trips of cultural heritages are created to impart limited experience content from web resources, or receive content at a specific place through humanities Geographic Information System (GIS). Therefore, on the basis of the blended space theory, an augmented space experience method for overcoming these shortages was composed. An ALE space framework is proposed to enable discovery through learning in an expanded space. The operation of ALE space is needed to create full coordination, such as a Content Management System (CMS). It involves a relation network to provide knowledge to the rule engine of the CMS. The application is represented with the Deoksugung Palace Seokjojeon hall example, by describing a user experience scenario.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.2428-2435
• /
• 2014

해상에 활용되는 계류앵커형식 중 한 종류인 석션 매입 앵커(Embedded Suction Anchor; ESA)의 점토지반에서 인발 저항력을 평가하기 위해 ALE(Arbitrary Lagrangian Eulerian) Adaptive Meshing기법을 적용한 수치해석을 수행하였다. 기존에 수행된 원심모형 실험과 한계 평형법을 이용한 해석적 방법의 결과와 비교 분석을 통해 수치해석 기법을 검증하고, 이를 이용해 앵커의 수평, 연직, 그리고 경사 방향의 인발 저항력을 평가하였다. 더불어 경사 방향의 재하 이전에 앵커를 경사각만큼 회전시켜 앵커에 수직한 방향으로 인발이 가해지도록 하여 그 거동을 평가하였다. 그 결과, 수평 재하 시 중간 위치에서 가장 큰 저항이 발휘되었고, 연직 재하의 경우 재하 위치에 따른 저항력의 차이가 크게 나타나지 않았다. 앵커의 중간 위치에서 경사 재하 결과 경사각이 증가할수록 인발 저항력이 감소하였으며, 초기회전이 있는 앵커의 경우 초기회전각이 30도 이하일 때 인발저항력이 일정한 결과를 보였다.

• 한국항공우주학회지
• /
• 제35권12호
• /
• pp.1082-1088
• /
• 2007

고속 및 고효율의 해양 수송수단에 대한 필요성이 점차 증가되면서 위그선(WIG: Wing in Ground effect)이 차세대 수송수단으로 관심이 집중되고 있다. 이러한 고속 해양 수송선의 구조설계 시 수면에 대한 충격하중은 중요하게 고려되어야 할 하중요소 중의 하나이며 착수하중에 의한 동적거동은 손상을 초래하는 중요한 요소이다. 본 연구에서는 위그선 착수 시 수면 충격하중에 대한 수치해석을 통해 선체의 동적거동을 평가하였다. 착수환경에서의 수면충격하중을 ALE (Arbitrary Lagrangian-Eulerian) 유한요소법을 적용하여 해석을 수행하였으며 3차원 쉘요소를 적용한 전기체 모델을 개발하여 위그선의 착수환경에서 선체의 동적거동을 모사하였다. 착수환경은 정상 착수조건과 측풍에 의한 비정상 착수조건 두 가지를 고려하여 해석을 수행하였으며 이러한 착수환경이 위그선 구조의 정적 구조 안정성에 미치는 영향을 평가하였다

• Geomechanics and Engineering
• /
• 제15권2호
• /
• pp.769-774
• /
• 2018

The growth of cities requires the construction of new tunnels close to the existing ones. Prediction and control of ground movement around the tunnel are important especially in urban area. The ground respond due to EPB (Earth Pressure Balance) pressure are investigated using the finite element method by ABAQUS in intersection of the triplet tunnels (Line 2, 3 and 4) of Mashhad Urban Railway in Iran. Special attention is paid to the effect of EPB pressure on the tunnel face displacement. The results of the analysis show that in EPB tunneling, surface settlement and face displacement is related to EPB pressure. Moreover, it is found that tunnel construction sequence is a great effect in face displacement value. For this study, this value in Line 4 where is excavated after line 3, is smaller than that line. In addition, the trend of the displacement curves are changed with the depth for all lines where is located in above and below, close to and above the centerline tunnel face for Line 2, 3 and 4, respectively. It is concluded that: (i) the surface settlement decreases with increasing EPB pressure on the tunnel face; (ii) at a constant EPB pressure, the tunnel face displacement values increase with depth. In addition, this is depended on the tunneling sequence; (iii) the trend of the displacement curves change with the depth.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.113-120
• /
• 2006

In this paper, generation mechanisms of ocean freak waves are briefly introduced in the context of wave-current interaction phenomena. As an accurate and efficient numerical tool, the spectral element method is presented with general features and specific treatment for the wave-current interaction problem. The present model of the fluid motion is based on the Navier-Stokes equations incorporating a velocity-pressure formulation. In order to deal with the free surface motion, an Arbitrary Lagrangian-Eulerian (ALE) description is adopted. As an intermediate stage of development, solution procedure and characteristic aspects of the present modeling and numerical method features are addressed in detail, and numerical results for wave-current interaction is left as further study.