• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1111-1116
• /
• 2011

Heat exchangers have been used for the automotive, HVAC systems, and other various industrial facilities, so the market is very wide. In general, high-efficiency heat exchangers with louver fins are used in the dust-free environment while heat exchangers with wavy fins are used for dusty environment such as construction site, etc. In this study, numerical analysis has been performed for typical heat exchangers, used as oil coolers or fuel coolers, with dual cell model that can handle different grids for the air-side and oil-side of heat exchangers. First wind tunnel tests were conducted to obtain one-dimensional thermal performance data of heat exchangers. Then, heat release rates with varying air flows were numerically predicted using the three-dimensional dual-cell model. The model can greatly enhance the accuracy of thermal design since it includes the effects of nonuniformity of air flows across heat exchangers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1833-1839
• /
• 2011

In this study, Global Gravitational Model EGM2008, EGM96 and 16,786 gravity points measured on land were compared and analyzed. On the assumption that land gravity data is most accurate, the correlation coefficient, differences, MSE and difference variance along the height were computed between land gravity data and EGM2008, EG96. The correlation coefficient, land gravity data and EGM2008, was computed most largely with 0.824 and the correlation coefficient with EGM96 was computed with 0.538. The standard deviation of differences between land gravity and EGM2008, EGM96 were 13.196 magl, 18.685 mgal respectively. Also the difference variance scope of EGM2008 was smaller than EGM96. There was no large variance of free-air anomaly differences between land gravity data and EGM2008 along the height however free-air anomaly differences with EGM96 varied along the height changes. Consequently EGM2008 nicely expresses Korea gravity field more than EGM96.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2012

Acoustic-pressure response of diluted hydrogen-air diffusion flames is investigated numerically by adopting a fully unsteady analysis of flame structures in low and high pressure regimes. As acoustic frequency increases, finite-rate chemistry is enhanced through a nonlinear accumulation of heat release rate for any pressure regime, leading to a high amplification index. Same numerical results are analyzed with application of a pressure-sensitive time lag model, and thereby, interaction index and time lag are calculated for each pressure regime. The interaction index has the largest value in each pressure regime at an acoustic frequency near 1000 Hz. In a high-pressure regime, flames are more unstable than in a low-pressure regime. The interaction index shows a good agreement with the amplification index.

• Composites Research
• /
• v.37 no.3
• /
• pp.143-149
• /
• 2024

This paper measures the mechanical properties of corrugated cardboard, an eco-friendly packaging material, and applies these measurements to the MAT_PAPER model in LS-DYNA for finite element analysis. Although MAT_PAPER is primarily designed for modeling the behavior of paper, this research demonstrates its applicability to corrugated cardboard as well. Tensile, compression, and shear behaviors of a corrugated cardboard were measured and analyzed, and based on these results, six yield surfaces were derived and integrated into the MAT_PAPER model. By comparing the finite element analysis of the material tests and the low velocity collapse analysis of the corrugated cardboard square boxes with each experimental results, it was shown that the behavior of corrugated cardboard could be equivalently considered well by the MAT_PAPER model. However, since the model is not rate-dependent, the high strain rate properties of liner materials were measured and used for strain rate correction. Consequently, this matches well with the results of the high-speed compression tests of the corrugated cardboard square boxes.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.167-168
• /
• 2000

복잡한 구조를 갖고 시간에 따라서 변하는 바람장내에서 공장굴뚝과 같은 점오염원에서 배출되는 오염물질의 확산을 계산하기 위해서 라그란지안 입자확산모텔(Lagrangian Particle Dispersion Model, LPDM)을 사용하는 것이 최근의 연구 동향이다. 구윤서(1999a, 1999b)는 중립 및 안정한 대기조건에서 바람장 계산시 비평형 2.5 난류모델을 이용한 LPDM을 개발하여 복잡한 대기흐름내 확산현상을 보다 정확히 모사할 수 있는 LPDM을 제시하였다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.169-170
• /
• 2000

UAM(Urban Airshed Model)은 광화학 모델로써 미국에서 오존 모델링에 대한 좋은 신뢰성을 갖고있어 여러 도시에 많이 적용된 모델이다. 우리나라에도 이미 수도권 지역을 대상으로 김용국(1996), 최정희(1999)논문에 적용된 바 있다. 그러나 우리나라 적용사례에서 보면 측정농도와 모델결과 값의 차이가 큰 경우가 나타난다. 따라서 UAM 실행의 정확도를 높이기 위해 오존농도의 범위를 살펴보고, 대상 기간을 선정하여 UAM을 실행하고, 그 결과를 비교하였는바 그 원인을 밝히기 위하여 경계농도에 대한 고찰을 실시하였다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.395-396
• /
• 2002

국내 지형이 복잡하고, 대단위 배출시설들이 대도시 주변에 많이 위치하고 있기 때문에 굴뚝에서 배출된 오염물질이 주변에 미치는 영향을 정확히 파악하기 위해서는 굴뚝 주변의 건물 세류현상에 대해 세밀한 해석이 요구된다. 현재 국내 환경영향평가에서 건물세류현상을 평가하기 위해서 주로 미국 환경보호청에서 제공하고 있는 ISC3모델을 사용하고 있다(US EPA, 1995). 그러나 이 모델에서는 건물과 굴뚝간의 거리에 따른 연기확산의 차이가 발생하는 것을 고려할 수 없고, 또한 건물 주위에 형성되는 와류(wake)에 의해서 배출된 연기의 중심축이 기울어지는 것 등을 고려 할 수 없다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.91-92
• /
• 2002

2002년 봄철에는 예년에 비하여 황사현상이 자주 발생하였는데 특히 3월 21-22일 과 4월 7-8일에는 예전에 찾아 볼 수 없을 정도의 강한 황사가 한반도에서 관측되었다. 이 사례들로 인하여 황사로 인한 재해를 방지하기 위하여 황사의 정량적인 예보가 필요함을 인식하게 되었고 이를 위해서 황사의 발생과 수송과정에 대한 수치모델의 정립이 요구된다고 하겠다. 따라서 이 연구에서는 황사의 발생을 예측하고 정량적으로 예보하기 위한 모델을 구축하고 2002년 두 차례의 강한 황사 사례에 적용하여 그 모델을 개선하고자 한다. (중략)

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.32-36
• /
• 1999

본 연구에서는 대공 무기체계의 성능평가를 위한 시뮬레이션 모델의 개발로서 능력추정을 위한 수식의 전개와 전산프로그램을 개발하고 예제를 통하여 능력산출 예를 보였다. 본 연구에서 고려된 시뮬레이션 방법으로 Mon Carlo 시뮬레이션과 Karman Filtering을 사용하였다. 본 모델의 주요 단계로서 1) 가장 최단 경로에서의 표적과 탄두간의 상대 속도와 위치를 결정하고, 2) 표적의 탄두에 대한 취약면적을 산출하고 3) 마지막으로 표적살상 확률을 산정하는 과정의 단계에 따라 개발되었다.

• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.20-28
• /
• 2014

Effect of radiation models on the suppression limits in counterflow $CH_4$/air diffusion flame was numerically investigated with fundamental experiments for the numerical validation. $N_2$ and $CO_2$ were considered as extinguishing agents. The differences in extinguishing concentration between OTM and SNB radiation models which have different accuracy levels were examined. As a result, there is no considerable difference in extinguishing concentration for the $N_2$ dilution as the radiation models with different accuracy levels were used. As the $CO_2$ having strong radiative effect was diluted in the low strain flames, however, the radiation model with high predictive accuracy such as SNB should be used. In particular, the $CO_2$ dilution in fuel stream leads to the significant difference in extinguishing concentration between OTM and SNB models. Therefore, it is necessary that the radiation model should be reasonably chosen with the consideration of numerical accuracy and computational time for the prediction of extinguishing concentration.