• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.439-444
• /
• 2005

Steady state simulation and dynamic simulation were performed to analyze the operational characteristics of a multi-type refrigeration system, Fully distributed model was adopted to simulate the steady state and transient responses of the system. The main aim was to see the effect of one indoor unit on the other unit. Numerical simulations were carried out for various operation conditions of an indoor unit - secondary fluid inlet temperature, mass flow rate and expansion valve opening. The results showed that the inlet temperature and mass flow rate of the secondary fluid of one indoor unit had minor effect on the operation of the other unit. However, the opening of the expansion valve had significant effect on the performance of the other unit.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.231-236
• /
• 2008

The purpose of this study is to develop assessment model for selection of new DSM investment programs. In this research, MAUT method which find assessment value by each attributes related to selecting new DSM investment programs using utility function and integrate with structural frame was used to develop assessment model. In order to validate the usefulness of the model, assessment model was applied for actual candidate group of new DSM investment programs in natural gas domain. By utilize this assessment model to select new DSM investment programs, it is expected to minimize risk of new program launching and to maximize efficiency of DSM investment programs.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.901-905
• /
• 2008

This study was conducted to clarify the heat load characteristics and heat and moisture behavior of underground structures. The authors achieved this by carrying out a numerical analysis using simple heat diffusion and simultaneous heat and moisture transfer equations based on measurement data. This paper presents the results of a numerical analysis on the heat load characteristics and heat and moisture behavior of an underground basement and its surrounding ground under a condition of internal heat generation. The authors found it difficult to predict the heat behavior and heat load of the underground basement by simple heat diffusion alone. Accurate prediction of the thermal environment and heat load requires careful consideration of the influences of moisture and precipitation

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.249-255
• /
• 2008

This paper developed the computerizing assessment system modeling of the natural gas and district heating DSM programs. It constructed as each project in accordance with the business investment plans & assessment DB, related M&V data DB and cost-effectiveness analysis data DB. It is composed of total 58 tables which are 22 tables which are used in the plan and the assessment, 16 tables which are used in the cost-effectiveness analysis, 18 tables which are used in the M&V, table which is used in qualitative evaluation, as by each programs. This computer programs can contributed to DSM business investment system construction as implementing for algorithm development and an estimation by each programs.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.142-147
• /
• 2008

This paper reports an analysis of self-pressurization in a closed cryogenic liquid storage system and its comparison with experimental data using liquid nitrogen. Partial equilibrium model(PEM), revised thermodynamic analysis of homogeneous model, has been applied for the pressurization in a closed tank. The vapor and liquid bulk temperature and the liquid-vapor interface temperature are separately calculated as their own representative values in this analysis. The analysis results of the partial equilibrium model are compared with the experimental data and other preceding homogeneous temperature models for validation.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.9-15
• /
• 2008

In this paper, we suggest PI control with a predictive controller to progress both energy saving and coefficient of performance(COP) in a variable speed refrigeration system. The capacity and superheat are controlled simultaneously and independently by an inverter and an electronic expansion valve respectively for saving energy and improving COP in the system. The refrigeration system has long dead time in superheat inherently. The dead time makes the system difficult to achieve the satisfactory quick control response, especially superheat control response. In order to solve this problem, we designed a predictive controller based on PI control to progress superheat control performance. The control performance was investigated through some experiments to verify the effectiveness of the predictive controller.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2011-2014
• /
• 2008

A linear induction motor for urban railway transit is accompanied with the end-effect and large air-gap comparing with a rotary induction motor. These cause amount of difference between simulation results and experiments. In order to figure out the difference, experiments based on a real-scale test bed are indispensable, however building a test-line and a test vehicle is so difficult that authors are going to make a small-scale model and simulate it for comparison. In this paper, A rotary-type small-scale model of a linear induction motor is designed. Thrust and normal force of the model have been analyzed with the variation of frequency and speed by using a Finite Element Method(FEM).

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.20-28
• /
• 2010

The computational flow analysis using LES technique was carried out to investigate the flow characteristics of a RAC chassis consisting of a rear-guider, a stabilizer and a cross-flow fan. The commercial SC/Tetra software was used in this analysis. In view of the results so far achieved, the distribution trends of static pressure and velocity vector of central region except the edges of a CFFan are similar regardless of the number of revolution, and an eccentric vortex exists around the bottom blade of a CFFan. Also, a reverse flow is found in the region between stabilizer and CFFan. Moreover, near the edges of a CFFan, an eccentric vortex is separated to two vortexes. Also these vortexes increase the velocity near a rear-guider, and guide the flow near a rear-guider into stabilizer inlet. Therefore, the reverse flow region is formed in the bottom of a CFFan.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.75-81
• /
• 1996

최근 포괄적 핵확산금지조약(CTBT)의 협정은 핵활동 감시의 목적으로 핵실험으로 인하여 발생되는 지진, 대기 방사성 핵종, 수중음향 그리고 초저음파 등을 종합운영하는 감시 시스템의 구축에 초점을 두고 있다. 1995년에 개최된 제네바군축회담/핵실험금지 특별위원회(CD/NTB/WP.224)에서 방사능 감시 전문가들은 대기중의 방사성 핵종의 검출, 핵실험 여부의 식별 그리고 핵실험 장소의 위치를 확인하기 위하여 국제 방사핵종 측정시스템(IRMS)을 설치할 것에 동의하였으며, 방사성 핵종의 검출은 핵실험 감시에 필수적인 수단으로 결정하였다. 본 연구에서는 대기중의 입자 방사능을 검출 시스템을 대기중의 공기를 흡입하기 위한 High Volume Air Sampler(HVAS)와 대기중의 방사능을 채집한 Filter Paper을 압축하는 Filter Paper 압축기 그리고 HpGe 검출시스템의 3 부분으로 구성하였다. HVAS와 Filter Paper 압축기는 본 연구의 수행을 위하여 자체 설계·제작하였으면, HpGe 검출시스템은 ORTEC사의 모델 CFG-PH-2를 사용하였다. HVAS에 의하여 Filter Paper애 채집된 시료를 측정하여 Raw Data를 분석하였다. 추후 본 시스템은 CTBT 원거리 대기 입자방사능 감시시스템의 네트워크에 연결하여 핵실험 감시를 위한 역할을 궁극적으로 검토중에 있다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.189-190
• /
• 2002

PMF(Positive Matrix Factorization) 모텔은 기존의 인자분석 모델이 갖는 인자부하량의 음수 문제를 해결하기 위해 인자부하량과 공통인자를 양수로 제한하여 결과 해석에 명확성을 주었다. 또한 환경연구에서 많이 나타나는 outlier와 log-normal분포모형을 선택사항으로 도입하고 있어 현재 환경관련 연구에 응용성이 높다. 본 연구에서는 대전 1, 2 공단 지역의 PM 10 중 미량금속과 이온성분의 농도를 분석하고 PMF를 이용하여 오염원을 확인하고자 한다. (중략)