• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.90-96
• /
• 2003

This paper deals with the design and the characteristic analysis of a coreless axial flux permanent magnet (AFPM) motor. Because a direct-drive wheel motor is easily derived from it, the AFPM motor is very suitable for application in an electric scooter. Compared to a conventional motor of the same size and weight, the AFPM motor is proven to have more power and torque per unit weight. In this paper, an AFPM coreless motor with a double-sided rotor disk equipped with Nd-Fe-B rare earth magnets is designed and a prototype of the motor is manufactured, which will be properly applied for the low-speed, and high-torque direct drive required for the electric scooter. The manufactured prototype of the motor has a rating of 300W, 510rpm, 5.6Nm, and 85% efficiency.

• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.284-291
• /
• 2006

최근 가전 및 자동차시스템의 전동화에 따라 고효율 전동기에 대한 관심이 고조되고 있다. 따라서 본 논문에서는 고속구동시 고효율구동이 가능한 코어없는 AFPM전동기의 운전특성에 대해서 기술하고 설계관점에서의 그 전기적 특징에 대해서 논의한다. 특히 전동기 특성에 큰 영향을 미치는 역기전력 및 공극에서의 자계특성을 보이고 또한 인덕턴스특성에 따른 제어특성에 대해서도 시뮬레이션 및 실험을 통해 고찰한다. 회로망법을 기초로한 전동기설계결과와 출력특성실험결과의 비교검토를 통해 토크-속도 및 효율운전특성을 확인하였으며 제어특성을 확인한다. 아울러 코어가 없어짐에 따라 생길 수 있는 진동 및 소음특성에 대해서도 평가한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.735-737
• /
• 2000

An axial-flux permanent-magnet machine(AFPM) topology with coreless winding is proposed. In the proposed AFPM configuration. the winding consists of a hexagon-shaped coils encapsulated in fiber-reinforced epoxy resin. Due to the lack of the iron core. the overall machine structure has high compactness and lightness. The simplified design calculation of the back emf was obtained. In this study, motor design was carried out using the software package Maxwell. This paper discusses the basic design of coil winding of AFPM motor. Experimental results were taken form a prototype machine rated 0.4 Nm, 2000 rpm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.828-830
• /
• 2002

Axial Flux Permanent Magnet motor could widely be used for low speed and high torque applications. In this paper, to analyse the sensor positioning effect of AFPM motor which has a new concentric winding method and to calibrate the switching timing according to speed, prototype motor is manufactured. As a result of experiment, advance angle from 30 degree to 45 degree of sensor position is more proper. So, this results can be used for design of sensor position to improve characteristic of the dual gap AFPM with coreless and slotless.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.676-678
• /
• 2002

This paper deals with the design and characteristic analysis of a coreless an axial flux permanent magnet (AFPM) motor. Axial-flux permanent magnet motors prove to be the best candidate for application in electric vehicles (EVs) as direct-drive wheel motors, as in comparison with conventional motors they allow design with higher compactness, lightness and efficiency. Recently, issues regarding environment and the diversification of dependence in oil are watched with keen interest. In this theses, through the simulation of AFPM for low and high torque which has stator in the center and two rotors each side, understand its specialty, with this, make a prototype motor and design drive which can enhance the motors stability in low speed. Especially, specialty of motors torque power output will be mainly talked and based on this, possibility of application in EVs will be inspected by the theoretical study and the test.