• Phonetics and Speech Sciences
• /
• v.2 no.3
• /
• pp.47-63
• /
• 2010

This study provides a description of the glottal characteristics of the word-initial low vowels /a, $\ae$/ in terms of a set of acoustic parameters and discusses glottal configuration as their acoustic correlates. Furthermore, it examines the effect of prosodic boundary on the glottal properties of the vowels, seeking an account of the possible role of prosodic structure based on prosodic theory. Acoustic parameters reported to indicate glottal characteristics were obtained from the measurements made directly from the speech spectrum on recordings of Korean and English collected from 45 speakers. They consist of two separate groups of native Korean and native English speakers, each including both male and female speakers. Based on the three acoustic parameters of open quotient (OQ), first-formant bandwidth (B1), and spectral tilt (ST), comparisons were made between the speech of males and females, between the speech of native Korean and native English speakers, and between Korean and English produced by native Korean speakers. Acoustic analysis of the experimental data indicates that some or all glottal parameters play a crucial role in differentiating the speech groups, despite substantial interspeaker variations. Statistical analysis of the Korean data indicates prosodic strengthening with respect to the acoustic parameters B1 and OQ, suggesting acoustic enhancement in terms of the degree of glottal abduction and the glottal closure during a vibratory cycle.

• Korean Journal of Remote Sensing
• /
• v.27 no.6
• /
• pp.729-741
• /
• 2011

Wind speeds have long been estimated from C-band VV-polarized SAR data by using the CMOD algorithms such as CMOD4, CMOD5, and CMOD_IFR2. Some SAR data with HH-polarization without any observations in VV-polarization mode should be converted to VV-polarized value in order to use the previous algorithms based on VV-polarized observation. To satisfy the necessity of polarization ratio (PR) for the conversion, we retrieved the conversion parameter from full-polarized SIR-C SAR image off the east coast of Korea. The polarization ratio for SIR-C SAR data was estimated to 0.47. To assess the accuracy of the polarization ratio coefficient, pseudo VV-polarized normalized radar cross section (NRCS) values were calculated and compared with the original VV-polarized ones. As a result, the estimated psudo values showed a good agreement with the original VV-polarized data with an root mean square error by 0.99 dB. We applied the psudo NRCS to the estimation of wind speeds based on the CMOD wind models. Comparison of the retrieved wind field with the ECMWF and NCEP/NCAR reanalysis wind data showed relatively small rms errors of 1.88 and 1.91 m/s, respectively. SIR-C HH-polarized SAR wind retrievals met the requirement of the scatterometer winds in overall. However, the polarization ratio coefficient revealed dependence on NRCS value, wind speed, and incident angle.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.81-86
• /
• 2014

The process parameter in optimized KOH alkali activation of soft carbon series coke material in high purity was set with DOE experiments design. The activated carbon was produced by performing the activation process based on the set process parameters. The specific surface area was measured and pore size was analyzed by $N_2$ absorption method for the produced activated carbon. The surface functional group was analyzed by Boehm method and metal impurities were analyzed by XRF method. The specific surface area was increased over 2,000 $m^2/g$ as the mixing ratio of activation agent increased. The micro pores in $5{\sim}15{\AA}$ and surface functional group under 0.4 meq/g were obtained. The contents of the metal impurity in activated carbon which is the factor for reducing the electrochemical characteristics was reduced less than 100 ppm through the cleansing process optimization. The electrochemical characteristics of activated carbon in 38.5 F/g and 26.6 F/cc were checked through the impedance measuring with cyclic voltammetry scan rate in 50~300 mV/s and frequency in 10 mHz ~100 kHz. The activated carbon was made in the optimized activation process conditions of activation time in 40 minutes, mixing ratio of activation agent in 4.5 : 1.0 and heat treatment temperature over $650^{\circ}C$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.3
• /
• pp.130-138
• /
• 2010

The thermal reliability of the closed-type BLDC motor for the high speed axial fans is analyzed by a numerical method in this paper. Since the module and the motor part are combined in a closed case, the heat generated from a rotor in the motor and the electronic components in the PCB module can not be effectively removed to the outside. Therefore the module will easily fail by high temperature. The accelerated-life testing was accomplished to formulate the life equation and numerical method is used to predict the inside temperature of the PCB module, which is one of the life equation parameter according to the environment. When the environment temperature of BLDC motor is 21, 35 and 50 $^{\circ}C$, the temperature in the PCB space is predicted as 73.4, 87.5 and 102.4 $^{\circ}C$. Then the life time with the temperature are calculated as 2,239, 863 and 328 hours.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.3
• /
• pp.229-236
• /
• 2016

Exergetic analysis was introduced in optimization of a rotating equilateral triangular internal cooling channel with staggered square ribs to maximize the net exergy gain. The objective function was defined as the net exergy gain considering the exergy gain by heat transfer and exergy losses by friction and heat transfer process. The flow field and heat transfer in the channel were analysed using three-dimensional Reynolds-averaged Navier-Stokes equations under the uniform temperature condition. Shear stress transport turbulence model has been selected as a turbulence closure through the turbulence model test. Computational results for the area-averaged Nusselt number were validated compared to the experimental data. Three design variables, i.e., the angle of rib, the rib pitch-to-hydraulic diameter ratio and the rib width-to-hydraulic diameter ratio, were selected for the optimization. The optimization was performed at Reynolds number, 20,000. Twenty-two design points were selected by Latin hypercube sampling, and the values of the objective function were evaluated by the RANS analysis at these points. Through optimization, the objective function value was improved by 22.6% compared to that of the reference geometry. Effects of the Reynolds number, rotation number, and buoyancy parameter on the heat transfer performance of the optimum design were also discussed.

• The Journal of Information Technology
• /
• v.2 no.2
• /
• pp.13-22
• /
• 1999

In this paper, we purpose automatic diagnosis in online, as the fundamental study to diagnose the partial discharge mechanism and to predict the lifetime by introduction a neural network. In the proposed method, we use AE(acoustic emission) sensing system and calculate a quantitative statistic parameter by pulse number and amplitude. Using statically parameters such as the center of gravity(G) and the gradient if the discharge distribute(C), we analyzed the early stage and the middle stage. the quantitative statistic parameters are learned by a neural network. The diagnosis of insulation degradation and a lifetime prediction by the early stage time are achieved. On the basis of revealed excellent diagnosis ability through the neural network learning for the patterns during degradation, it was proved that the neural network is appropriate for degradation diagnosis and lifetime prediction in partial discharge.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.554-554
• /
• 2012

Controlling the size distribution of gold nanoparticles (NPs) is of great importance due to the fact that their properties are strongly dependent upon the size distribution as well as the size itself. In the citrate reduction method for gold NP synthesis, the citrate works as (1) a reducing agent, (2) a surfactant, and also (3) a weak base: it raises the pH of the whole reaction mixture. Here, we have extensively studied the all three roles of the citrate, by adding other reagents separately (NaBH4, CTAB, and NaOH) for the independent control of the three roles of the citrate. Among the roles of the citrate, that as a weak base was found to be the most critical parameter affecting the size distribution of gold NPs and the size distribution became much more improved with the increase of the solution pH, while adding a supplementary surfactant or reducing agent resulted in the formation of less homogeneous NPs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.45-53
• /
• 2009

Die casting process of Mg alloys for high temperature applications was studied to produce an engine oil pan. The aim of this paper is to evaluate die casting processes of the Aluminium oil pan and in parallel to apply new Mg alloy for die casting the oil pan. Temperature distributions of the die and flow pattern of the alloys in cavity were simulated to diecast a new Mg alloy by the flow simulation software. Dies have to be modified according to material characteristics because melting temperature and heat capacity are different. We changed the shape and position of runner, gate, vent hole and overflow by the simulation results. After several trial and error, oil pans of AE44 and MRI153M Mg alloys are produced successfully without defect. Sleeve filling ratio, cavity filling time and shot speed of die casting machine are important parameter to minimize the defect for die casting Magnesium alloy.

• Phonetics and Speech Sciences
• /
• v.7 no.2
• /
• pp.47-54
• /
• 2015

The objectives of this study are to research the frequency of depression symptom in patients with voice disorders and to investigate parameters associated with depression from voice evaluation. A hundred ninety six patients(106 males and 90 females) who had been diagnosed with voice disorders first in their lifetime were selected. All the patients were examined by laryngeal stroboscopy. For depression and voice study, personal interview, acoustic and aerodynamic analysis, voice handicap index(VHI), reflux symptom index(RSI), and beck depression index(BDI) were done respectively. Mild to severe BDI were seen in 26.2%(52 patients) of the whole patients. A BDI mean score of female patients was $8.8{\pm}7.5$ which was higher than that of male patients($5.6{\pm}6.6$), the difference observed being statistically significant(p<0.001). In the acoustic analysis, the score of sent_duration parameter was increasing in the patients with depression, which was significantly higher than the score of the patients without depression(p<0.05). In the addition, the scores of VHI and RSI were higher in the patients with depression(p<0.001). Our findings suggest that the prevalence of depression in patients with voice disorders is related to female, speaking velocity, and self-questionnaire. This result can be used for psychologically based approach to therapy.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.81.2-81.2
• /
• 2011

Motivated by recent attempts to derive geomagnetic activity from hourly mean data in long term studies, we test the recursive Kalman filter method to obtain the regular solar variation curve of the geomagnetic field. Using a simple algorithm, we are able to assign a quiet day curve to every day separately, without the need for additional input parameter(s) to define the geomagnetically quiet days. We derive a digital counterpart AhK of the analog range index Ak at the subauroral Sodankyl$\ddot{a}$ station and compare it to the earlier digital estimate Ah and the local Ak index. We find that the new method outperforms the former estimate in every aspect studied and provides a robust, straightforward manner of estimating and verifying the manually scaled Ak index, based on readily available hourly values. The model is independent of sampling; thus, for shorter term studies where high-sampling data are available, more accurate estimates can also be obtained when needed. Therefore, in contrast to other recent approaches, we do not provide a method to quantify irregular activity directly but derive the actual quiet day curves in the traditional manner. In future applications the same algorithm may be used to define a wide variety of geomagnetic indices (such as Ak, Dst, or AE).