• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.114-114
• /
• 2010

최근 고용량의 디커플링 캐패시터를 기판에 내장하여 고주파 발생의 원인인 배선길이와 실장 면적을 획기적으로 줄이는 임베디드 디커플링 캐패시터에 대한 연구가 활발히 진행되고 있다. 하지만 기존의 공정들은 높은 공정온도와 같은 공정상의 한계를 가지고 있어 상온 저 진공 분위기에서 세라믹 분말을 기판에 고속 분사시켜 기공과 균열이 거의 없는 치밀한 나노구조의 세라믹 제작이 가능한 후막코팅기술인 Aerosol Deposition Method (ADM)에 착목하였으며, 이 ADM을 박막공정으로 응용하여 $BaTiO_3$ 박막을 제작하고 고용량의 디커플링 캐패시터 제작을 실현하고자 한다. 하지만, Cu 기판 상에 성막 된 $0.5\;{\mu}m$이하의 $BaTiO_3$ 박막에서는 $BaTiO_3$ 분말 내에 존재하는 평균입자 보다 큰 입자와 응집분말로 인해 발생하는 pore, crater, not-fully-crushed particles와 같은 거시적인 결함들에서의 전류 통전과 울퉁불퉁한 $BaTiO_3$ 박막과 기판 사이의 계면에서의 전계의 집중에 의한 전류의 증가로 인하여 큰 누설전류 발생하는 문제에 봉착하였다. 이러한 문제를 해결하기 위하여 제시된 효과적인 방법으로 Stainless steel 기판과 같이 표면경도가 높은 기판을 사용하는 것이며, 이를 통해 $0.2\;{\mu}m$의 두께까지 유전 $BaTiO_3$ 박막을 성막 할 수 있었으며, 치밀한 표면 미세구조와 줄어든 $BaTiO_3$ 박막과 기판 사이의 계면의 거칠기를 확인하였다. 하지만, $BaTiO_3$ 박막 내에 발생하는 누설전류의 근본원인을 확인하기 위해서는 누설전류에 대한 미시적인 접근이 더욱 요구된다. 이에 본 연구에서는 누설전류 발생원인의 미시적 접근을 위해 두께에 따른 $BaTiO_3$ 박막의 누설전류 전도기구에 대한 조사하였으며, 이를 통해 $BaTiO_3$ 박막내 발생하는 누설전류의 원인은 $BaTiO_3$막 내에서 donor로서 역할을 하는 oxygen vacancy와 불균일한 전계의 집중으로 인한 전자의 tunneling 현상임을 확인할 수 있었다. 또한, Nano-indenter와 Conductive atomic force microscopic를 이용한 정밀 측정을 통해 표면경도의 중요성을 재확인하였으며 $BaTiO_3$ 박막의 두께가 $0.2\;{\mu}m$이하로 더욱 얇아지게 되면 입자간 결합 문제 또한 ADM을 박막화 하는데 있어 중요한 요소임을 확인하였다.

• Archives of Plastic Surgery
• /
• v.48 no.5
• /
• pp.483-493
• /
• 2021

Background Direct-to-implant (DTI) breast reconstruction after nipple-sparing mastectomy (NSM) with the use of acellular dermal matrix (ADM) provides reliable outcomes; however, the use of ADM is associated with a higher risk of complications. We analyzed our experiences of post-NSM DTI without ADM and identified the predictive factors of adverse surgical outcomes. Methods Patients who underwent NSM and immediate DTI or two-stage tissue expander (TE) breast reconstruction from 2009 to 2020 were enrolled. Predictors of adverse endpoints were analyzed. Results There were 100 DTI and 29 TE reconstructions. The TE group had a higher rate of postmastectomy radiotherapy (31% vs. 11%; P=0.009), larger specimens (317.37±176.42 g vs. 272.08±126.33 g; P=0.047), larger implants (360.84±85.19 g vs. 298.83±81.13 g; P=0.004) and a higher implant/TE exposure ratio (10.3% vs. 1%; P=0.035). In DTI reconstruction, age over 50 years (odds ratio [OR], 5.43; 95% confidence interval [CI], 1.50-19.74; P=0.010) and a larger mastectomy weight (OR, 1.65; 95% CI, 1.08-2.51; P=0.021) were associated with a higher risk of acute complications. Intraoperative radiotherapy for the nipple-areolar complex increased the risk of acute complications (OR, 4.05; 95% CI, 1.07-15.27; P=0.039) and the likelihood of revision surgery (OR, 5.57; 95% CI, 1.25-24.93; P=0.025). Conclusions Immediate DTI breast reconstruction following NSM is feasible in Asian patients with smaller breasts.

• Archives of Craniofacial Surgery
• /
• v.20 no.3
• /
• pp.170-175
• /
• 2019

Background: Cryptotia is a congenital anomaly in which the upper part of the retroauricular sulcus is absent and buried underneath the temporal skin. Various surgical techniques have been reported for the correction of cryptotia following Kubo's V-Y plasty in 1933. Conventional methods using a local skin flap, skin grafting, tissue expansion, Z-plasty, and any of these combined approaches can result in skin deficiency of the upper auricle. The aim of this study was to develop a new method that improves cosmetic results and has fewer complications. Methods: This study involved four patients in whom five cryptotia deformities were corrected using V-Y plasty and Z-plasty. After elevation of the flap, acellular dermal matrix (ADM; MegaDerm) that was over 5 mm in thickness was applied to the cephalo-auricular angle and positioned to enhance the projection of the ear. Lastly, the flap was transposed to complete the repair. Results: Between January 2014 and February 2018, cryptotia correction with ADM graft was performed in four patients. None of the patients developed a recurrence of cryptotia, and there were no postoperative complications such as wound infection, seroma formation, and dehiscence. In addition, the procedures resulted in a favorable cosmetic appearance. Conclusion: Based on these findings, i.e., no recurrence and a favorable cosmetic result, when using an ADM graft, it is suggested that this technique could be an alternative method of cryptotia correction. It could also lessen donor-site morbidity when compared to autologous cartilage grafting and be more cost-effective than using cartilage from a cadaver.

• The Plant Pathology Journal
• /
• v.38 no.6
• /
• pp.629-636
• /
• 2022

Colletotrichum species is known as the major causal pathogen of red pepper anthracnose in Korea and various groups of fungicides are registered for the management of the disease. However, the consistent use of fungicides has resulted in the development of resistance in many red pepper-growing areas of Korea. Effective management of the occurrence of fungicide resistance depends on constant monitoring and early detection. Thus, in this study, various methods such as agar dilution method (ADM), gene sequencing, allele-specific polymerase chain reaction (PCR), and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) were applied for the detection of benzimidazole resistance among 24 isolates of Colletotrichum acutatum s. lat. and Colletotrichum gloeosporioides s. lat. The result of the ADM showed that C. gloeosporioides s. lat. was classified into sensitive and resistant isolates to benomyl while C. acutatum s. lat. was insensitive at ≥1 ㎍/ml of benomyl. The sequence analysis of the β-tubulin gene showed the presence of a single nucleotide mutation at the 198th amino acid position of five isolates (16CACY14, 16CAYY19, 15HN5, 15KJ1, and 16CAYY7) of C. gloeosporioides s. lat. Allele-specific PCR and PCR-RFLP were used to detect point mutation at 198th amino acid position and this was done within a day unlike ADM which usually takes more than one week and thus saving time and resources that are essential in the fungicide resistance management in the field. Therefore, the molecular techniques established in this study can warrant early detection of benzimidazole fungicide resistance for the adoption of management strategies that can prevent yield losses among farmers.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.57-61
• /
• 1986

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.101-108
• /
• 1999

In this paper, a real time diagnostic algorithm for estimating the impact location by loose parts is proposed. It is composed of two modules such as the alarm discrimination module (ADM) and the impact-location estimation module(IEM). First, ADM decides whether the detected signal that triggers the alarm is the impact signal by loose parts or the noise signal. Second, IEM by use of the arrival time method estimates the impact location of loose parts. In order to validate the application of this method, the test experiment with a mock-up (flat board and reactor) system is performed. The experimental results show the efficiency of this algorithm even under high level noise and potential application to Loose Part Monitoring System (LPMS) for improving diagnosis capability in nuclear power plants.

• Biomolecules & Therapeutics
• /
• v.11 no.2
• /
• pp.91-98
• /
• 2003

A new series of highly water soluble platinum(II) complexes[Pt(II)(DL-2-hydroxy-3-methylbutyrate)(trans-l-1,2-dimninocyc1ohexane)] (PC-1) and [Pt(II)DL-2-hydroxy-3-methylbutyrate](cis-1,2-diaminocyclohexane)](PC-2) were synthesized and characterized by their elemental analysis and by various spectroscopic techniques [infrared(IR), $^{13}C$-nuclear magnetic resonance (NMR)]. In vitro antitumor activity of new Pt(II)complexes was tested against MKN-45, MKN/ADM and MKN/CDDP human gastric adenocarcinoma cell lines using colorimetric MTT[3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyltetrazoliumbromide] assay for cell survival and proliferation. PC-1 and PC-2 showed active against MKN-45/P, MKN/ADM and MKN/CDDP human gastric cancer cell lines, and the antitumor activity of these compounds were comparable or superior to that of cisplatin. The nephrotoxicities of PC-1 and PC-2 were found quite less then that of cisplatin using MTT and [$^3H$] thymidine uptake tests in rabbit proximal tubule cells, human kidney cortical cells human renal cortical tissues. Based on these results, these novel platinum(II) complex compounds(PC-1 ＆ PC-2) represent a valuable lead in the development of the new anticancer chemotherapeutic agents capable of improving antitumor activity and low nephrotoxicity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.110-110
• /
• 2009

Aerosol deposition method(ADM)는 상온에서 에어로졸화된 고상의 원료분말을 노즐을 통해 분사시켜 소결과정을 거치지 않고도 상온에서 고밀도 후막을 제조할 수 있는 공정으로서, 다양한 재료의 코팅이 가능하고, 코팅층의 조성 및 화학 양론비의 제어가 용이한 특징을 갖는다. 본 연구에서는 ADM을 이용하여 큰 유전상수, 압전계수, 초전계수, 탄성계수를 갖는 $BaTiO_3$ 분말을 원료로 하여 압전소자, 커패시터, 고전압용 유전체 등에 응용이 가능한 세라믹 층 형성에 관한 연구를 진행하였다. 또한 $BaTiO_3$ 같은 강유전체 세라믹을 이용하여 여러 가지 소자를 제조하는 경우 소자의 미세조직에 따라 물성이 영향을 받는 것으로 확인되어져 있다. 이에 본 연구에서는 세라믹 분말보다 상대적으로 탄성이 큰 polymer 분말을 첨가하여 후막 내부의 결정립의 크기가 20 nm 의 평균 결정립을 갖는 세라믹 후막에 비해 최대 10 배 정도까지 증가하는 것을 확인할 수 있었으며, 이에 따라 후막에서의 유전율 및 유전손실율의 전기적 특성 변화를 확인할 수 있었고, 이러한 물성변화에 대한 원인 고찰을 위하여 후막의 미세구조 및 화학조성 등에 대한 다양한 분석이 이루어 졌으며, 상온에서 성막되는 후막의 세라믹 층의 응용을 위한 최적의 공정조건을 제시하고자 한다.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.40-44
• /
• 1999

Glutathione S-transferase (GST) is a multifunctional protein that catalyzes the catalyzes the conjugation of glutathione with electrophilic compounds. It exists in a variety of isoenzy-matic froms with a wide range of substrate specificity and plays a pivotal role in detoxification of various drugs. In order to elucidate the GST-${\pi}$'s involvement of multidrug resistance (MDR) in drug-resistant tumor cell lines, we determined GST-${\pi}$ content by "1 step sandwich method". Consequently, adriamycin resistant cells of MCF-7 (MCF-7/ADM) have 7-fold increase of GST-${\pi}$ content than that of MCF-7 cells, while its {TEX}$IC_{50}${/TEX} was 116-fold greater than parent cell line. By northrn blotting, we compared whether MCF-7/ADM cells express GST-${\pi}$ mRNA. The GST-${\pi}$ mRNA expression in these cells was not inducible, but constitutive when treated for 24 h with a concentration of 0, 20, 200, and 2000 nM of adriamycin, respectively. Taken together, these results suggest that GST-${\pi}$ may not be directly associated with multidrug resistance in these human cancer cell lines.ell lines.

• Structural Engineering and Mechanics
• /
• v.25 no.3
• /
• pp.347-363
• /
• 2007

A novel methodology, referred to as Auxiliary Domain Method (ADM), allowing for a very efficient solution of nonlinear reliability problems is presented. The target nonlinear failure domain is first populated by samples generated with the help of a Markov Chain. Based on these samples an auxiliary failure domain (AFD), corresponding to an auxiliary reliability problem, is introduced. The criteria for selecting the AFD are discussed. The emphasis in this paper is on the selection of the auxiliary linear failure domain in the case where the original nonlinear reliability problem involves multiple objectives rather than a single objective. Each reliability objective is assumed to correspond to a particular response quantity not exceeding a corresponding threshold. Once the AFD has been specified the method proceeds with a modified subset simulation procedure where the first step involves the direct simulation of samples in the AFD, rather than standard Monte Carlo simulation as required in standard subset simulation. While the method is applicable to general nonlinear reliability problems herein the focus is on the calculation of the probability of failure of nonlinear dynamical systems subjected to Gaussian random excitations. The method is demonstrated through such a numerical example involving two reliability objectives and a very large number of random variables. It is found that ADM is very efficient and offers drastic improvements over standard subset simulation, especially when one deals with low probability failure events.