• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.598-600
• /
• 2008

On this paper, digitally controlled flyback dc-dc converter and dc-ac inverter for bldc motor control are presented, which is used one processor. This system has 12V battery input for the flyback-converter, and the flyback-converter generates 30V output for BLDC motor inverter input. In order to compensate the flyback-converter, the transfer function of flyback converter is derived and digital PI compensator is adapted. Through bode diagram, stability of digital flyback-converter is analyzed. To verify the proposed system, digital simulation of the bldc motor drive using digital flyback-converter are performed.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.247-248
• /
• 2012

본 논문에서는 빌딩용 직류배전에 적용된 리던던트 전력 시스템을 제안하였다. 제안한 시스템 방식은 3상 다이오드 정류회로를 AC/DC 컨버터와 병렬로 연결하여 전력변환장치의 유지보수 시 직류전원의 무정전 공급이 가능하도록 하였다. 이에 따라 제안된 시스템의 구성에 대하여 기술하고, 시뮬레이션을 통하여 리던던트 전력 시스템의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2721-2723
• /
• 1999

DC and small-signal ac characteristics are examined for a pulse-width modulated (PWM) dc-dc buck-boost converter with a peak voltage modulation (PVM) feedforward control. Circuit model is used to derive an expression for the output voltage in terms of the input voltage and load resistance. Small-signal circuit model is used to derive the input-to-output voltage transfer function (audiosusceptibility).

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.231-232
• /
• 2015

본 논문에서는 기존 전류형 HVDC(High Voltage Direct Current) 토폴로지에서 DC단에 직렬로 MMC(Modular multi-level Con verter, MMC) 토폴로지를 결합하여 대용량의 전력을 전류형 HVDC로 사용하고, 소용량 전력을 MMC로 사용 및 전력을 컨트롤하여 전류형 HVDC의 점호각을 최소로 가져갈 수 있는 토폴로지를 설계하였다. 이러한 토폴로지는 최소점호각 제한을 적게 할 수 있고, 동일출력 DC전압 조건하에서 무효전력발생을 적게 할 수 있는, 기존 전류형 HVDC에 MMC를 추가한 새로운 하이브리드 HVDC용 AC/DC컨버터의 구조이다. 타당성 검증을 위해 PSIM을 이용한 시뮬레이션을 수행하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.431-436
• /
• 2001

Boost converter operating at the boundary region CCM and DCM is designed. Boost converter is incorporated behind rectifier as an equivalent resistance. Also for a high efficiency and PF, a switch turn-on time is controlled by using the capacitor filter effect. To verify a validity of the designed boost converter 100[W] boost converter is fabricated and also experiment are carried out.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.185-187
• /
• 2006

본 논문은 신 발전 방식들 중 하나인 용융탄산염형 연료전지 발전시스템의 국산화연구와 관련하여, 연료전지로부터 생성된 전력을 전력계통에 안정되게 변환, 주입하기 위한 계통연계형 전력변환기를 제작하고 단위기기별 성능 시험을 수행한 결과이다. 250kW급 전력변환기의 구조 설계와 단위기기 설계는 250kW급 용융탄산염형 연료전지 시스템의 정격 사양 및 스택의 운전 형태를 시뮬레이션 하여 진행되었으며, 크게 DC/DC 컨버터부와 DC/AC 인버터부의 회로로 구성된다.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.99-103
• /
• 2003

Recently, a fuel cell with low voltage and high current of electronic output characteristics is remarkable for new generation system. It needs both a dc-dc boost converter and do-ac inverter to be used in domestic power. Therefore, this paper presents do-dc boost converter with ZVS for fuel cell generation system This topology has several advantages, which are ZVS characteristics of all of main and auxiliary switches, reduction of reactor component size because of high frequency switching, and low rated voltage stress of the switches. In this paper, theoretical analysis, operation principle, and design procedures are presented. And simulation results from Pspice are presented to validate the theoretical analysis.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.508-509
• /
• 2010

계통 연계형 태양광 시스템을 구성하고 있는 전력변환 장치인 전력 조절기는 일반적으로 DC-DC 컨버터와 DC-AC 인버터인 Two-Stage로 구성되어 있다. 본 논문에서는 인덕턴스의 값을 변화하면서 태양광 발전용 전력 조절기의 풀 브리지 고주파 스위칭 인버터에 대한 효율을 3KW급 Prototype을 구성하여 이론 분석과 비교하여 검증 하였다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.31-33
• /
• 2008

A novel lossless current sensing technique for a synchronous buck converter is presented. The inductor DCR method is generally used as a low cost and lossless current sensing technique of DC/DC converters. It is however difficult to obtain the accurate current value for the conventional DCR method because the inductor resistance varies depending on the operating frequency. In order to overcome this problem, an improved current sensing technique is proposed, which has the separated DC and AC sensing circuits. The concept and operation of the proposed method are explained and the experimental results are provided to show its effectiveness.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.30-41
• /
• 1996

Current Source(CS) PWM converter is appropriate for the magnet power supply system which requests high power and high precision current control. Input and output filters should be installed to eliminate the current or voltage harmonics caused by the PWM switching for the CS PWM converter. But the input/output filters limit the output DC current range and may destroy the system with filter resonance, and make the system equation more complicated. In this paper, systematic and simple filter design method which considers not only the harmonic attenuation but also the total system good transfer function characteristics in the dc filter. The simulated and experimental results verify the proposed theory. (author). refs., figs., tabs.