• 제목/요약/키워드: AC model

검색결과 847건 처리시간 0.029초

AC/DC 스위치모드 컨버터의 해석모델에 관한 연구 (A Study on the Analysis Model of AC/DC Switch-mode Converter)

  • 오인석;박한웅;박진규;성세진
    • 전력전자학회논문지
    • /
    • 제3권1호
    • /
    • pp.70-76
    • /
    • 1998
  • 본 연구에서는 고역률로 동작하면서 입력전류의 고조파성분을 크게 억제시키는 AC/DC 스위치모드 콘버어터의 기본적인 동작을 해석하고, 이를 기초로 수학적모델을 도출하여 전체 회로의 동작을 나타내는 모의실험방법을 제시한다. 제시된 모의실험모델로써 필터나 부스트인덕터 등의 회로구성요소의 정격을 결정하거나 정상 및 고장 운전조건하에서의 동작을 해석할 수 있음으로써 전체회로의 설계기준을 정할 수 있을 것이다. 모의실험결과가 실제 실험결과와 거의 일치함을 보임으로써 제시한 모의실험모델의 타당성을 입증하였다.

EMTDC에 의한 교류 전철급전시스템 사고 해석 (Fault Analysis of AC Electric Railway System Mode by EMTDC)

  • 이한민;오광해;장길수;권세혁
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제52권9호
    • /
    • pp.521-527
    • /
    • 2003
  • This study presents the AC railway system modeled by EMTDC in detail. The ,model made by EMTDC have a lot of advantages. It could be available for the system change, simulated repeatedly and also applied regarding very complicated systems. EMTDC simulations to verify this model are compared with the hand calculations. It is confirmed that the model made by EMTDC is correctly designed.

AC Loss를 고려한 22.9kV급 Mini-Model 변압기의 절연 설계 및 시험 (Insulating Design and Test of 22.9kV Class Mini-Model Transformer Considering AC Loss)

  • 백승명;정종만;곽동순;김해종;석복렬;김상현
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권8호
    • /
    • pp.420-424
    • /
    • 2004
  • This paper presents experimental data from model windings with different arrangement of coil in order to provide information to design a 22.9kV class HTS transformer. Before experiment, the composite insulation of two different type of HTS transformers are investigated. The first basic of investigation is a breakdown characteristic of liquid nitrogen and flashover characteristic on the GFRP surface under ac and impulse, The second investigation is insulation design, manufacture and test of model windings. These include a AC withstand voltage test of 50 kV rms and a lighting impulse test of 150 kV at peak.

AC 서보모터에 대한 견실한 외란억제 제어 (Robust Disturbance Suppression Control for AC Servo Motors)

  • 김창환
    • 한국전자통신학회논문지
    • /
    • 제7권4호
    • /
    • pp.839-848
    • /
    • 2012
  • 본 논문에서는 외란토크를 효과적으로 억제할 수 있는 AC 서보모터의 견실제어 방법을 제안한다. 제안된 제어기는 플랜트 모델에 기초한 피드포워드제어기와 안정화 피드백제어기로 구성된다. 피드포워드제어기는 공칭(nominal) 플랜트의 출력이 기준 속도명령을 정확히 추적하도록 설계되며 피드백제어기는 전체 폐루프시스템을 안정화시키는 역할을 한다. 피드백제어기는 임의로 선택될 수 있는 자유함수를 포함하는데 이 자유함수는 외란토크의 영향을 억제하고 제어기가 모델오차에 견실하게(robust) 동작되도록 선택될 수 있다. 컴퓨터 시뮬레이션을 통하여 제안된 제어방식이 기존의 제어방식들에 비해 우수한 제어성능을 가짐을 입증한다.

LncRNA AC005332.7 Inhibited Ferroptosis to Alleviate Acute Myocardial Infarction Through Regulating miR-331-3p/CCND2 Axis

  • Rixin Dai;Xiheng Yang;Wujin He;Qiang Su;Xuexin Deng;Juanfen Li
    • Korean Circulation Journal
    • /
    • 제53권3호
    • /
    • pp.151-167
    • /
    • 2023
  • Background and Objectives: Acute myocardial infarction (AMI) often occurs suddenly and leads to fatal consequences. Ferroptosis is closely related to the progression of AMI. However, the specific mechanism of ferroptosis in AMI remains unclear. Methods: We constructed a cell model of AMI using AC16 cells under oxygen and glucose deprivation (OGD) conditions and a mice model of AMI using the left anterior descending (LAD) ligation. The 3-(4, 5-dimethylthiazol-2-yl)-2, 5 diphenyltetrazolium bromide was employed to determine cell viability. The levels of lactate dehydrogenase, creatine kinase, reactive oxygen species (ROS), glutathione (GSH), malondialdehyde (MDA), and iron were measured using corresponding kits. Dual luciferase reporter gene assay, RNA-binding protein immunoprecipitation, and RNA pull-down were performed to validate the correlations among AC005332.7, miR-331-3p, and cyclin D2 (CCND2). Hematoxylin and eosin staining was employed to evaluate myocardial damage. Results: AC005332.7 and CCND2 were lowly expressed, while miR-331-3p was highly expressed in vivo and in vitro models of AMI. AC005332.7 sufficiency reduced ROS, MDA, iron, and ACSL4 while boosting the GSH and GPX4, indicating that AC005332.7 sufficiency impeded ferroptosis to improve cardiomyocyte injury in AMI. Mechanistically, AC005332.7 interacted with miR-331-3p, and miR-331-3p targeted CCND2. Additionally, miR-331-3p overexpression or CCND2 depletion abolished the suppressive impact of AC005332.7 on ferroptosis in OGD-induced AC16 cells. Moreover, AC005332.7 overexpression suppressed ferroptosis in mice models of AMI. Conclusions: AC005332.7 suppressed ferroptosis in OGD-induced AC16 cells and LAD ligation-operated mice through modulating miR-331-3p/CCND2 axis, thereby mitigating the cardiomyocyte injury in AMI, which proposed novel targets for AMI treatment.

Steady State and Transient Analysis of Switched Reluctance Motor Drive Fed from a Controlled AC-DC Rectifier

  • Moussa, Mona Fouad
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권4호
    • /
    • pp.1495-1502
    • /
    • 2017
  • The Theory of operation of switched reluctance motors (SRM) depends on the reluctance torque, where energy is transferred to stator winding only. Although its construction is simple, the electrical design is complex, due to the switching configuration needed to deliver power to stator coils. However, because of the nonlinearly of magnetic circuit, SRM has torque ripple. This paper proposes a new strategy to drive SRM from a single-phase AC supply. Each stator winding is connected to AC-DC or AC-AC converters, which is called branch. All branches are connected in parallel to a single-phase AC supply. A shaft encoder allows current production in stator winding during the positive torque production region and terminates it during the negative torque production region. A magnetic flux is produced between stator poles when current is supplied from AC supply to stator coil and repeats many cycles as long as the rate of change of stator inductance is positive. Different possibilities for the configurations of AC-AC or AC-DC converters are introduced to drive SRM from the single-phase AC supply. A case study is presented for a SRM fed from AC supply through semi-controlled AC-DC converter is presented. A simulation model is introduced and verified by experimental rig for two-phase SRM.

추위에 노출된 슬관절염 모델에서 내슬안, 외슬안 직접구가 통증행동과 TRPM8 발현에 미치는 영향 (Effects of Direct Moxibustion Applied to EX-LE4 and EX-LE5 on the Pain Behavior and Expression of TRPM8 in the Rat Model of Ambient Cold Exposed Osteoarthritis)

  • 지병욱;김이꽃;이지은;구성태
    • Korean Journal of Acupuncture
    • /
    • 제33권4호
    • /
    • pp.204-212
    • /
    • 2016
  • Objectives : The aim of the study is to investigate the effects of moxibustion on the pain behavior and expression of TRPM8 in the dorsal root ganglion(DRG) in the rat model of ambient cold(AC) exposed osteoarthritis(OA). Methods : OA was induced by the injection of $50{\mu}l$ of 2% monosodium iodoacetate(MIA) into the knee joint cavity. To examine the level of pain, weight bearing forces(WBFs) of affected limb was measured. For the AC exposure, the animals were housed in 6 h/day at $4^{\circ}C$ for 14 days after MIA injection. Moxibustion treatment was performed at EX-LE4 and EX-LE5 with 5 cons(1, 7 or 10 mg) per day for 13 days from 5 days after MIA injection. The expressions of TRPM8 in DRG were measured by western blotting analysis. Results : The WBFs of MIA-AC group were decreased significantly compared to MIA group at 2, 3, 6, 7, 8 and 9 days after arthritis induction. After the first 6 h-AC exposure, expressions of TRPM8 in MIA-AC group were increased significantly compared to those of naive group. After moxibustion treatment, only the WBFs of 7 mg treated group were restored significantly. Moreover, the over-expressions of TRPM8 were attenuated by the moxibustion treatment in AC exposed rats. Conclusions : The data suggest that AC can increase arthritic knee pain via up-regulated TRPM8 and moxibustion treatment improve the arthritic pain via modulation of TRPM8 expression in DRG in the rat model of AC exposed MIA induced arthritis.

교류전압 하에서의 액적의 전기습윤현상 (Electrowetting of a droplet under an AC Electric Fields)

  • 홍진석;고성희;강관형;강인석
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
    • /
    • pp.175-176
    • /
    • 2006
  • Electrowetting is prevailing for its various applicability on lap-on-a-chip, and MEMS devices, such as a pump, lens, micro-actuator in the micro-TAS technology. In the usual electrowetting, an AC power is preferred to DC practically. The AC electric field delays the contact angle-saturation, decreases the hysterisis, and is more stable in the view point of dielectric strength. But researches for AC electric field on electrowetting have not been reported very much yet. The different effect of AC on the electrowetting system, especially the effect of a frequency needs to be understood more concretely. In this work, the usual system for electrowetting, water droplet on the dielectric coated electrode (EWOD) is analyzed. Experimental study on the response of contact angles on input frequencies is performed. The simple circuit-model for EWOD system is considered to explain the experimental results. For more concrete understanding, the system is analyzed numerically, where simple AC-conduction model is used. Wetting tensions are analyzed under various input frequency to excavate the experimental results for the responses of the system on input frequencies.

  • PDF

새로운 측정방법을 이용한 바이폴라 트랜지스터에서의 직류 및 교류 전류 편중 효과에 관한 해석 (The Analysis of DC and AC Current Crowding Effects Model in Bipolar Junction Transistors Using a New Extraction Method)

  • 이흥수;이성현;김봉렬
    • 전자공학회논문지A
    • /
    • 제31A권8호
    • /
    • pp.46-52
    • /
    • 1994
  • DC and AC current crowding effects for microwave and high speed bipolar transistors are investigated in detail using a new and accurate measurement technique based on Z-parameter equationa. Using the new measurement technique dc and ac current crowding effects have been explained clearly in bipolar junction transistors. To model ac crowding effects a capacitive element defined as base capacitance (C$_b$), called ac crowding capacitance is added to base resistance in parallel thereby treating the base resistance(R$_b$) as base impedance Z$_b$. It is shown that base resistance decreases with increasing collector current due to dc current crowding and approaches to a certain limited value at high collector current due to current crowding and approaches to a certain limited value at high collector currents regardless of the emitter size. It is also observed that due to ac current crowding base capacitance increases with increasing collector current. To quantigy the ac crowding effects for SPICE circuit simulation the base capacitance(C$_b$) including the base depletion and diffusion components has been modeled with an analytical expression form.

  • PDF

Planning of HVDC System Applied to Korea Electric Power Grid

  • Choi, DongHee;Lee, Soo Hyoung;Son, Gum Tae;Park, Jung-Wook;Baek, Seung-Mook
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권1호
    • /
    • pp.105-113
    • /
    • 2018
  • This paper proposes pre-analysis on planning of high-voltage direct current (HVDC) transmission system applied to Korea electric power grid. HVDC transmission system for interface lines has been considered as alternative solution for high-voltage AC transmission line in South Korea since constructing new high-voltage AC transmission lines is challenging due to political, environmental and social acceptance problems. However, the installation of HVDC transmission system as interface line in AC grid must be examined carefully. Thus, this paper suggests three scenarios to examine the influences of the installation of HVDC transmission system in AC grid. The power flow and contingency analyses are carried out for the proposed scenarios. Power reserves in metro area are also evaluated. And then the transient stability analysis focusing on special protection scheme (SPS) operations is analyzed when critical lines, which are HVDC lines or high voltage AC lines, are tripped. The latest generic model of HVDC system is considered for evaluating the impacts of the SPS operations for introducing HVDC system in the AC grid. The analyses of proposed scenarios are evaluated by electromechanical simulation.