• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.7
• /
• pp.619-628
• /
• 2000

Abstract Perspective views provide a powerful depth cue and thus aid the interpretation of complicated images. The main drawback of current perspective volume rendering is the long execution time. In this paper, we present an efficient perspective volume rendering algorithm based on coherency between rays. Two sets of templates are built for the rays cast from horizontal and vertical scanlines in the intermediate image which is parallel to one of volume faces. Each sample along a ray is calculated by interpolating neighboring voxels with the pre-computed weights in the templates. We also solve the problem of uneven sampling rate due to perspective ray divergence by building more templates for the regions far away from a viewpoint. Since our algorithm operates in object-order, it can avoid redundant access to each voxel and exploit spatial data coherency by using run-length encoded volume. Experimental results show that the use of templates and the object-order processing with run-length encoded volume provide speedups, compared to the other approaches. Additionally, the image quality of our algorithm improves by solving uneven sampling rate due to perspective ray di vergence.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.37-45
• /
• 1999

For the purpose of reducing the output voltage fluctuation of thin film multijunction thermal converter, EVANOHM alloy-S and chromel-alumel thermocouple were used as a thin film heater material and as a thermoelement of thrmopile, respectively. The temperature coefficient of the resistance of thin film EVANOHM alloy-S heater was about $1.4 {\times} 10^4/^{\circ}C$, which is very small compared to other materials, and thin film chromel-alumel thermocouple showed relatively small difference of the Seebeck coefficients about $38 {\mu}V/K$. The output voltage fluctuation of the thermal converter was about 0.06% for the initial 120 seconds in air and decreased considerably after preheating for 5 minutes or more. The respective AC-DC voltage and current transfer error ranges of the thermal converter were about ${\pm}$1.6 ppm and ${\pm}$0.7 ppm in the frequency range from 10Hz to 10 kHz and increased remarkably below 10 Hz or above 10 kHz.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.269-275
• /
• 2005

We analyzed the unit cell performance against the cathode porosity, which is supposed to be closely related with active sites for the cathode reaction. In order to fabricate the unit cells with different porosity in the cathode layer we changed the mixing ratio of fine and coarse LSCF cathode powders. The final porosity of each cathode layer was 14, 23, 27, $39\%$ respectively. According to the electrochemical analysis of unit cell performance via DC current interruption and AC impedance method, the electrodic polarization resistance was diminished as the cathode porosity increased. The decrease of polarization resistance was attributed due to the increase of active reaction sites and the enhancement of overall unit cell performance could be explained in the same line.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2015

This research is the first research on developing the speed limit select model and also it is the result of the research on the importance of each element and consideration factors when selecting the speed limit. For the consideration factor discrimination and calculation of the importance, the delphi method and AHP method was used. The delphi survey was processed through third round survey, 5 high consideration factor(Level 1) and 23 low consideration factor(Level 2) was discriminated. During the process of the third delphi survey, when the CVR cost was in the range between 0.4~1.0 it was treated as the consideration factor when selecting the speed limit and less than 0.4 cost was eliminated. In the process of the second delphi survey, 33 consideration factors were discriminated but was reordered into 23 categories through the third survey. Based on the 23 categories earned through the third delphi analysis, the AHP survey was processed. The result of the AHP survey was that out of the importance of the 5 high consideration factor(Level 1), the traffic condition was evaluated as the number one factor and the vessel condition, waterway condition, environment condition, supporting condition and etc. conditions were evaluated following the traffic condition. Out of the 23 low consideration factor(Level 2) consideration, the visibility was evaluated to be the first important and the performance of the vessel steering, objective factors within the harbor, amount of traffic and density, distance between the passing vessel, speed of the steering capacity and tidal current were the following evaluated factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2722-2728
• /
• 2011

3Phase PWM rectifier has become increasingly popular due to its capability of nearly sinusoidal waveform of the input current, and nearly unity power factor operation as a AC/DC rectifier of high capacity telecommunication power supply system. Generally, PI controller is used as a voltage controller of PWM rectifier and voltage controller must be designed to have low overshoot in transient state to get a reliability and stable operation. However, in the application of telecommunication in which load condition is varied very fast, the voltage controller must have a large bandwidth to reduce output voltage variation. The PI controller with large bandwidth arouse the excessive overshoot of the output voltage, and this large output voltage variation degrades the reliability of communication power of the three-phase PWM Rectifier. In this paper, new IP voltage controller for 3 phase PWM rectifier is proposed which has relatively low transient output voltage variation. The improved output characteristics of the transient state voltage responses of the starting and at load changes of the proposed voltage controller are proved by simulations and experiments.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.4
• /
• pp.442-454
• /
• 2002

It's noticed that the SA-DCT (Shape-Adaptive Discrete Cosine Transform) produces different 2-dimensional transform coefficients according as the first 1-dimensional transform is applied in horizontal or vertical direction for an arbitrarily shaped boundary block. Performing the first 1-dimensional transform in the direction, which has higher spatial correlation or smaller shifting distance, can compact the energy on the smaller number of AC coefficients around DC. This paper shows, experimentally, the compaction capability improvement by choosing the first 1-dimensional transform direction with higher spatial correlation or smaller shifting distance. Two adaptive selection methods are proposed to decide efficiently the spatial direction with higher correlation in a boundary block. One is based on the gradients between DC coefficients of neighboring and current blocks, and the other is based on the final coding efficiency that means the number of bits required for coding the block. Using the MPEG-4 video coder, the proposed method shows coding efficiency gain up to 10.87% compared to the conventional SA-DCT method.

• Journal of the Korean Society of Costume
• /
• v.29
• /
• pp.171-182
• /
• 1996

This thesis is concerned with the study of the court attire the typical attire of the ju-dicial world in a point of time that more than 100 years have passed since the introduction of the modern judical system. In recognition of the fact that compiled data of the official uni-form or attire in Korea are insufficient this study placed its signification on the provision of information with focus on attire. As a result of studying court attire in Korea the conclusion was made as follows: Firstly Official attires in Yi Dynasty were divided by wearing embroidered insignia on the breast and the back of an official robe ac-cordint to court rank as well as by wearing Sa-mo in wadded clothes of Dan-ryeong and attaching all sorts of appurtenances including bands and shoes The Minister of Justice was equipped with Ho-pyo Dae-sa-heon equipped with Hae-chi the mayor of Seoul equipped with Un-an In the era of the Kng Young-jo the minister of Justice had no change in its of-ficial robe but the mayer(Pan-yun) of Seoul (Han-sung-bu) had Un-an(wild geese in clouds) changed into Un-hak In the King Ko-jog era the minister of Justice had Ho-pyo changed into Ssang-ho and the mayor of Seoul had Un-hak changed into Ssng-hak on embroideved insignia on the breast and back of an official robe. Laws and regulations concerning court attire began with the In-judgement Full-dress Uni-form Requlation for official-level Clerical Staff below the ordinary staff the Issue No. 14 of the Royal Ordinance in 1906 provided as $\ulcorner$the matter cincerning the Dress Regulation of the Tribunal staff of the Cho-sun Government-General$\lrcorner$the Issue No. 222 of the Royal Ordi-nance in 1911 and changed into$\ulcorner$the Regu-lation on the Dress of Judge Prosecutor At-torney and Law Count Clerk$\lrcorner$the Issue No. 12 of the Supreme Court Rule in 1953 affter the establishment of Korean Government since emancipation from the Japanese rule and into $\ulcorner$the Regulation concerning the Court Attire of Judge and law Court Clerical Staff$\lrcorner$the Issue No. 516 of the Supreme Court Rule in 1966. The judicial system in Korea is the system introduced from the foreign country rather than autogenously developed. And it came to pass through the Japanese colonial period it the beginning that it took root in Korea n was not stabilized in harmony with our native tradition. Accordingly the attare regulation in the judicial system took root in our society by accepting the Japanese attire regulation as it was and judical officials have come to wear the count attire similar to that of the Japanese imperialist era due to its influence though Korean independent goverment was established together with liberation form the Japanese rule. The more regrettable thing is that the current court attire has maintained the form greatly influenced by the U. S. court attire. Fortunately as the judicial circles have recently raised their voices for change in the court attire it has been told that the forma-tion of a meeting for a new court attire has been under way. The birth of the court attire into Which our tradition is sublimated is expected. This study end up with thinking that the must Korean thing is the most global thing in this era that people in the world are clamoring for globalization.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.312-321
• /
• 2012

The electric potential of plasma column is measured with the high voltage probe in a pair of atmospheric plasma jets operated by AC-voltage. According to the polarity of voltage applied to the electrodes, the polarity of plasma column potential has the same polarity of applied voltage. The high potential of plasma column at the side of high voltage electrode is decreased linearly along the plasma column to the ground side. Therefore, the plasma column seams to be a kind of resistor whose resistivity is a few 10s $M{\Omega}/m$. In the experiment of double-jets system, the polarity of plasma potential is verified to be the same polarity to the applied voltage. When the different voltage polarities are applied to the electrodes of double plasma jets, the attractive force is acted between two plumes at the merged plasma and the plasma potential is measured to be low as a few 10s V. When the same polarity of voltage is applied to the electrode, the repulsive force is acted and the plasma potential is measured to be high as a several 100s V at the merged plumes. In the exposure of plasma plume on the bio-substrate with the double plasma jets, the electric shock and thermal damage might be proportional to the plasma power which is the multiplication of the plasma potential and the plasma current.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.360-369
• /
• 2008

The solar cells should be operated at the maximum power point because its output characteristics were greatly fluctuated on the variation of insolation, temperature and load. It is necessary to install an inverter among electric power converts by means of the output power of solar cell is DC. The inverter is operated supply a sinusoidal current and voltage to the load and the interactive utility line. In this paper, the proposes a photovoltaic system is designed with a step up chopper and single phase PWM voltage source inverter. Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper is operated in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature for solar cell has typical dropping character. The single phase PWM voltage source inverter is consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be develop continuously by connecting with the source of electric power for ordinary using. It can be cause the efect of saving electric power, from 10 to 20%. The single phase PWM voltage source inverter operates in situation, that its output voltage is in same phase with the utility voltage. The inverter are supplies an ac power with high factor and low level of harmonics to the load and the utility power system.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.2
• /
• pp.59-66
• /
• 2020

Effects of Na₂SiO₃ concentration added into 0.1 M NaOH + 0.05 M NaF solution on the formation behavior and properties of PEO films on AZ91 Mg alloy were investigated under 1200 Hz of alternating current (AC) by voltage-time curves, in-situ observation of arc generation behavior and measurements of film thickness, surface roughness and micro vickers hardness. In the absence of Na₂SiO₃ in the 0.1 M NaOH + 0.05 M NaF solution, about 4 ㎛ thick PEO film was formed within 1 min and then PEO film did not grow but white spots were formed by local burning. Addition of Na₂SiO₃ up to 0.2 M caused more increased formation voltage and growth of PEO film with uniform generation of arcs. Addition of Na₂SiO₃ from 0.2 M to 0.4 M showed nearly the same voltage-time behavior and uniform arc generation. Addition of Na₂SiO₃ more than 0.5 M resulted in a decrease of formation voltage and non-uniform arc generation due to local burning. PEO film growth rate increased with increasing added Na₂SiO₃ concentration but maximum PEO film thickness was limited by local burning if added Na₂SiO₃ concentration is higher than 0.5 M. Surface roughness of PEO film increased with increasing added Na₂SiO₃ concentration and appeared to be proportional to the PEO film thickness. PEO film hardness increased with increasing added Na₂SiO₃ concentration and reached a steady-state value of about 930 H_V at more than 0.5 M of added Na₂SiO₃ concentration.