• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.197-201
• /
• 2007

The reattachment characteristics of propane lifted flames in laminar coflow jets influenced by AC electric fields have been investigated experimentally in low AC frequency range. The reattachment velocity and height have been measured by varying the applied AC voltage and frequency. The results showed that the reattachment of lifted flame occurred at relatively higher jet velocity with AC electric fields, comparing to that without having AC electric fields. The effect of AC electric fields became more effective at higher voltage and lower frequency in the AC frequency range larger than 30 Hz. However, in the low frequency range below 30 Hz, the reattachment velocity decreased with decreasing frequency. Consequently, there existed a transition regime, for the frequency smaller than about 30 Hz. Also, when the AC voltage was applied to the fuel nozzle at very low frequency, the reattachment process exhibited an oscillatory behavior, synchronized with the applied AC frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.517-520
• /
• 2004

In this paper, a PWM Cuk AC-AC converter is modelled by using complex circuit DQ transformation whereby the equivalent model is obtained which has the complete information of the Cuk converter. Using the model, the dynamicc characteristics equations such as state equations is analytically obtained. Finally, the PSIM simulation show the validity of the modelling and analysis.

• Korean Journal of Materials Research
• /
• v.7 no.6
• /
• pp.460-463
• /
• 1997

에폭시 수지 계의 경화반응 속도를 증가시키고 기계적 물성을 향상시키기 위해 합성 pheny1 glycidy1 ether(PGE)-acetamide(AcAm)를 diglycidy1 ether of bispenol A(DGEBA)/4,4'-methylene dianiline(MDA)계에 도입하였다. PGE와 AcAm을 2:1의 몰비로 혼합한 후 18$0^{\circ}C$에서 1시간 반응시켜서 PGE-AcAm을 합성하였다. 5phr의 PGE-AcAm이 첨가되었을 때 인장강도가 15% 개선되었으며, 그 이후로는 PGE-AcAm을 합성하였다. 5phr의 PGE-AcAm이 첨가되었을 때 인장강도가 15% 개선되었으며, 그 이후로는 PGE-AcAm의 함량에 관계없이 거의 비슷한 값을 나타내었다. 반면에유리전이 온도(Tg)와 충격강도는 PGE-AcAm의 함량이 증가함에 따라 감소하였다. 파단면은 PGE-AcAm이 첨가됨으로써 더 복잡한 형상을 나타내었다.

• Journal of Power Electronics
• /
• v.3 no.4
• /
• pp.249-258
• /
• 2003

This paper presents a high-efficient and cost effective three-phase AC/DC-DC/AC power conversion system with a single two-switch type active Auxiliary Resonant DC Link (ARDCL) snubber circuit, which can minimize the total power dissipation. The active ARDCL snubber circuit is proposed in this paper and its unique features are described. Its operation principle in steady-state is discussed for the three phase AC/DC-DC/AC converter, which is composed of PWM rectifier as power factor correction (PFC) converter, sinewave PWM inverter. In the presented power converter system not only three-phase AC/DC PWM rectifier but also three-phase DC/AC inverter can achieve the stable ZVS commutation for all the power semiconductor devices. It is proved that the proposed three-phase AC/DC-DC/AC converter system is more effective and acceptable than the previous from the cost viewpoint and high efficient consideration. In addition, the proposed two-switch type active auxiliary ARDCL snubber circuit can reduce the peak value of the resonant inductor injection current in order to maximize total system actual efficiency by using the improved DSP based control scheme. Moreover the proposed active auxiliary two-switch ARDCL snubber circuit has the merit so that there is no need to use any sensing devices to detect the voltage and current in the ARDCL sunbber circuit for realizing soft-switching operation. This three-phase AC/DC-DC/AC converter system developed for UPS can achieve the 1.8% higher efficiency and 20dB lower conduction noise than those of the conventional three-phase hard-switching PWM AC/DC-DC/AC converter system. It is proved that actual efficiency of the proposed three-phase AC/DC-DC/AC converter system operating under a condition of soft switching is 88.7% under 10kw output power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1283-1290
• /
• 2003

Recently, PWM Buck AC-AC Converter is widely employed in various industrial applications such as voltage and power regulator, electronic transformer, phase shifter and so on. This paper presents static and dynamic modeling and complete characteristic analysis of a PWM Buck AC-AC converter. Firstly, the three phase converter system is modelled by using DQ transformation whereby we can obtain basic characteristic equations such as voltage gain and power factor as well as state equation and transfer function for control. Secondly, based on the analysis, the feedforward-feedback control technique is also proposed to obtain instantaneous duty level change whereby very fast dynamic response is achieved. Finally, the experimental results show the validity of the modeling, analysis and control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.4
• /
• pp.306-314
• /
• 2012

In case of the conventional DC-AC inverter using two DC-DC converters with unipolar output capacitor voltages, for generating the AC output voltage, the output capacitor voltages of its each DC-DC converter must be higher than the DC input voltage. To solve this problem, this paper proposes a single-phase DC-AC inverter using two embedded Z-source converters with bipolar output capacitor voltages. The proposed inverter is composed of two embedded Z-source converters with common DC source and output AC load. The AC output voltage is obtained by the difference of the output capacitor voltages of each converter. Though the output capacitor voltage of converter is relatively low compared to the conventional method, it can be obtained the same AC output voltage. Moreover, by controlling asymmetrically the output capacitor voltage, the AC output voltage of the proposed system is higher than the DC input voltage. To verify the validity of the proposed system, a DSP(TMS320F28335) based single-phase embedded Z-source DC-AC inverter was made and the PSIM simulation was performed under the condition of the DC source 38V. As controlled symmetrically and asymmetrically the output capacitor voltages of each converter, the proposed inverter could produce the AC output voltage with sinusoidal waveform. Particularly, in case of asymmetric control, a higher AC output voltage was obtained. Finally, the efficiency of the proposed system was measured as 95% and 97% respectively in case of symmetric and asymmetric control.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.49-58
• /
• 2017

PURPOSES : The objective of this study is to develop a simple regression model in designing the asphalt concrete (AC) overlay thickness using the Mechanistic-empirical pavement design guide (MEPDG) program. METHODS : To establish the AC overlay design equation, multiple regression analyses were performed based on the synthetic database for AC thickness design, which was generated using the MEPDG program. The climate in Seoul city, a modified Hirsh model for determining dynamic modulus of asphalt material, and a new damaged master curve approach were used in this study. Meanwhile, the proposed rutting model developed in Seoul city was then used to calibrate the rutting model in the MEPDG program. The AC overlay design equation is a function of the total AC thickness, the ratio of AC overlay thickness and existing AC thickness, the ratio of existing AC modulus and AC overlay modulus, the subgrade condition, and the annual average daily truck traffic (AADTT). RESULTS : The regression model was verified by comparing the predicted AC thickness, the AADTT from the model and the MEPDG. The regression model shows a correlation coefficient of 0.98 in determining the AC thickness and 0.97 in determining AADTT. In addition, the data in Seoul city was used to validate the regression model. The result shows that correlation coefficient between the predicted and measured AADTT is 0.64. This indicates that the current model is more accuracy than the previous study which showed a correlation coefficient of 0.427. CONCLUSIONS:The high correlation coefficient values indicate that the regression equations can predict the AC thickness accurately.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.102-107
• /
• 1999

To analysis a promoter strength of Atographa californica nucler polyhedrosis virus (AcNPV) IE1 gene, an immediate viral gene, ${\beta}$-glactosidase gene as a reporter gene was introduced under the control of the IE1 promoter. The restriction fragment containing IE1 promoter and ${\beta}$-galctosidase gene from pAcIE1-gal were inserter into pBacPAK9 to yield transfer vector pAcNPV-IE1-gal. The pAcNPV-IE1-gal was cotransfected with AcNPV genomic DNA BacPAK6 into Sf9 cells to produce recombinant baculovirus AcNPV-IE1-gal. In addition, recombinant bacvulovirus AcNPV-gal, which express ${\beta}$-galac-tosidase under the control of the polyhedrin promoter, was constrer, was constructed to compared with AcNPV-IE1-gal. The recombinant viruses were respectively infected into Sf9 cells and characterized by the virus titer and expression of ${\beta}$-galactoxidase in Sf9 cells. The promoter strength of IE1 and polyhedrin promoters was determined by the amount of ${\beta}$-galactosidase secreted into medium by viral infection. The titer of AcNPV-IE1-Gal determined by plaque assays in Sf9 cells was similar to that of AcNPV-gal. However, expression level of ${\beta}$-galactosidase by AcNPV-IE1-gal was significantly lower than that by AcNPV-gal. In conclusion, promoter strength of IE1 was approximately 25-fold lower than that of polyhedrin.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.328-332
• /
• 2006

Fe(III)-impregnated activated carbon (Fe-AC) was applied in the treatment of synthetic wastewater containing Cu(II). To investigate the stability of Fe-AC at acidic condition, dissolution of Fe was studied with a variation of solution pH ranging from 2 to 4. Fe-AC was unstable at pH 2, showing a gradual increase of the dissoluted Fe as reaction time increased, while negligible amount of Fe was dissoluted above pH 3. This stability test suggests the applicability of Fe-AC in the treatment of wastewater above pH 3. Adsorption capacity of Cu(II) onto activated carbon (AC) and Fe-AC was investigated in a batch and a column test. In the adsorption kinetics, rapid adsorption of Cu(II) onto AC and Fe-AC was noted at initial reaction time and then reached a near complete equilibrium after 6 hrs. Adsorption trends of Cu(II) onto AC and Fe-AC were similar, showing an increased Cu(II) adsorption at higher pH. Compared with AC, Fe-AC showed a greater Cu(II) adsorption over the entire pH range studied in this research. From the adsorption isotherm obtained with variation of the concentration of Cu(II), the maximum adsorption capacity was identified as 61,700 mg/kg.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.46-52
• /
• 2012

This paper proposes a novel single-phase ac-ac converter topology based on the Z-source concept. The converter provides buck-boost function and plays the role of frequency changer. Compared to the traditional ac-dc-ac converter, it uses fewer devices, realizes direct ac-ac power conversion, and has a simpler circuit structure, so as to have higher efficiency and better circuit characteristics. Compared to the traditional matrix converter, it provides a wider voltage regulation range. The circuit topology, operating principle, control method and simulation results are given in this paper, and the rationality and feasibility is verified.