• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권2호
• /
• pp.90-98
• /
• 2016

Objectives: The aim of this study was to compare the osteogenic effects of demineralized dentin matrix (DDM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) in rabbit calvarial defects with DDM and anorganic bovine bone (ABB) combined with rhBMP-2. Materials and Methods: Four round defects with 8-mm diameters were created in each rabbit calvaria. Each defect was treated with one of the following: 1) DDM, 2) ABB/rhBMP-2, or 3) DDM/rhBMP-2. The rhBMP-2 was combined with DDM and ABB according to a stepwise dry and dip lyophilizing protocol. Histological and microcomputed tomography (${\mu}CT$) analyses were performed to measure the amount of bone formation and bone volume after 2- and 8-week healing intervals. Results: Upon histological observation at two weeks, the DDM and ABB/rhBMP-2 groups showed osteoconductive bone formation, while the DDM/rhBMP-2 group showed osteoconductive and osteoinductive bone formation. New bone formation was higher in DDM/rhBMP-2, DDM and ABB decreasing order. The amounts of bone formation were very similar at two weeks; however, at eight weeks, the DDM/rhBMP-2 group showed a twofold greater amount of bone formation compared to the DDM and ABB/rhBMP-2 groups. The ${\mu}CT$ analysis showed markedly increased bone volume in the DDM/rhBMP-2 group at eight weeks compared with that of the DDM group. Notably, there was a slight decrease in bone volume in the ABB/rhBMP-2 group at eight weeks. There were no significant differences among the DDM, ABB/rhBMP-2, and DDM/rhBMP-2 groups at two or eight weeks. Conclusion: Within the limitations of this study, DDM appears to be a suitable carrier for rhBMP-2 in orthotopic sites.

• 한국가시화정보학회지
• /
• 제15권2호
• /
• pp.59-67
• /
• 2017

To verify floatability of ABB (Air bubble barrier), we compared bubble swarm behavior with and without the air-driven ejector. Experiment was conducted using the fabricated air-driven ejector with 5 mm nozzle on the bottom of 1 m3 water tank. Reynolds number of air in the nozzle was ranged 1766-13248. We analyzed data with statistical method using image processing, particle mage velocimetry (PIV) and proper orthogonal decomposition (POD) analysis. As a result of POD analysis, there was no significant eigenmode in bubbly flow generated from the ejector. It means that more complex turbulent flows were formed by the ejector, thereby (1) making bubbles finer, (2) promoting three-dimensional energy transfer between bubble and water, and (3) making evenly distributed velocity profile of water. It is concluded that the air-driven ejector could enhance the performance of ABB.

• Nuclear Engineering and Technology
• /
• 제27권2호
• /
• pp.165-175
• /
• 1995

가압경수로의 과압보호계통은 가장 심각한 비정상 과도운전시 원자로냉각재계통의 압력을 설계압력의 110% 이내로 유지시킬 수 있는 충분한 용량으로 설계되어져야 한다. 본 연구에서는 ABB-CE 설계의 2825 MWt 가압경수로에 기존의 스프링 탑재형 가압기 안전밸브 대신 SEBIM-POSRV를 채택할 경우 과압보호 기능 수행의 가능성을 연구하였다. 과압보호 기능을 수행하기 위한 SEBIM POSRV의 크기 및 작동 설정치를 영광 3, 4호기의 과압보호 해석에 사용했던 LTC 전산코드를 이용한 분석을 통해서 결정했다. 분석 결과 monobloc SEBIM POSRV를 이용한 과압보호계통은 원자로냉각재계통의 압력을 설계 압력의 110% 이내로 유지시킴으로써 ABB-CE 형태의 2825 MWt급 가압경수로에서 과압보호 기능을 수행할 수 있음이 입증되었다.

• Journal of Periodontal and Implant Science
• /
• 제44권5호
• /
• pp.251-258
• /
• 2014

Purpose: The preferred material for bone augmentation beyond the envelope of skeletal bone is the bone block graft, due to its dimensional stability. We evaluated the necessity of rigid fixation for the bone block graft, and compared the bone regeneration and volume maintenance associated with grafting using a synthetic hydroxyapatite block (HAB) and an autogenous bone block (ABB) without rigid fixation on rabbit calvaria over two different periods. Methods: Cylinder-shaped synthetic HAB and ABB were positioned without fixation on the rabbit calvarium (n=16). The animals were sacrificed at 4 or 8 weeks postoperatively, and the grafted materials were analyzed at each healing period using microcomputed tomography and histologic evaluation. Results: Integration of the graft and the recipient bed was observed in all specimens, although minor dislocation of the graft materials from the original position was evident in some specimens (six ABB and ten HAB samples). A tendency toward progressive bone resorption was observed in the grafted ABB but not in the grafted HAB, which maintained an intact appearance. In the HAB group, the area of new bone increased between 4 and 8 weeks postoperatively, but the difference was not statistically significant. Conclusions: The nonfixed HAB was successfully integrated into the recipient bed after both healing periods in the rabbit calvaria. In spite of limited bone formation activity in comparison to ABB, HAB may be a favorable substitute osteoconductive bone material.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.700-705
• /
• 2003

In this paper, an extended process model is proposed for the application of flexible belt grinding equipment as utilized in robotic grinding. The analytical and experimental results corresponding to grinding force, material removal rate (MRR) and contact area in the robotic grinding shows the difference between the conventional grinding and the flexible robotic grinding. The process model representing the relationship between the material removal and the normal force acting at the contact area has been applied to robotic programming and control. The application of the developed model in blade grinding demonstrates the effectiveness of proposed process model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.269-272
• /
• 2003

Industry is now seeing a dramatic increase in robot simulation and off-line programming. In order to use off-line programming effectively, the simulated workcell has to be identical to the real workcell. This requires an efficient and accurate method for the workcell calibration. Currently used techniques in the industry, however, are typically time-consuming, expensive and therefore not suitable for in-process application. This is because most of these techniques are based on the so-called “absolute calibration” method. In contrast to absolute method, relative calibration only measures the difference of an interested object relative to a standard reference. Owing to the small measurement range requirement, relative calibration method is very cheap and can achieve very high accuracy. In this paper the relative method is applied to calibrate an entire grinding workcell. Linear gauge is the only measurement device used. This workcell calibration includes tool center point (TCP) calibration and work object frame calibration. Due to the efficiency of the calibration algorithm and the simplicity of the calibration setup, the described calibration procedure can be done in process.

• Journal of Plant Biology
• /
• 제34권2호
• /
• pp.145-150
• /
• 1991

제주도에서 서식하고 있는 무릇의 게놈 분포와 B염색체의 출현 빈도를 조사하였다. 게놈의 유형은 BB, ABB, ABBB, AABB, AABBB 및 AAABBB의 6가지로 나타났으며, 그 중 BB, ABB 및 AAABBB게놈 식물은 제주도 집단에서 처음으로 발견하여 보고되는 것이다. 게놈의 분포는 AABB가 66.2%로 가장 높게 나타났으며, ABBB게놈이 20.4%로 그 다음이었다. ABB와 AAABB게놈 식물은 한 개체씩만 발견되었다. 게놈의 조성은 조사된 13개 집단 중 세가지 유형이 혼생하는 집단이 2개, 두 가지 유형이 나타나는 집단이 BB, AABB 또는 AABBB 중 한 가지 유형의 게놈 식물이 분포하고 있었다. 게놈의 조성으로 보아 제주도의 무릇 집단은 한반도 내륙보다는 일본 집단과의 유연 관계가 더 가까운 것으로 생각된다. B염색체의 수는 1-4개로 나타났으며, 모두 등완염색체(F)였다. B염색체의 출현 빈도는 BB와 AABBB게놈 식물에서 각각 75%로 가장 높게 나타났으며, AABB게놈 식물에서는 48%로 나타나 한반도 내륙(44%)과 비슷한 양상을 보였다. A게놈에 비해 B게놈의 수를 많이 지닌 식물에서 B염색체의 빈도가 높게 나타나는 것이 특징으로 나타났다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1191-1191
• /
• 2001

Generation of precise, accurate, and robust calibration models for spectroscopic methods of analysis can be time-consuming, expensive, and sometimes difficult to achieve. For these reasons, efforts have been made to find ways in which the calibration from one instrument can be moved to another with minimal performance reduction. A slight shift in nomenclature from the common term calibration transfer to the term calibration transport is used here to help resolve the subtle difference between two means of moving a calibration from one instrument to another. The former term denotes a transfer procedure that includes mathematical manipulation of the calibration data via some determined transfer function, whereas the latter term does not. Todays generation of process and laboratory FTNIR analyzers is capable of not only achieving calibration transfer, but also calibration transport often without the need of slope or bias adjustments. Several studies are used to examine the boundaries of the extent to which calibration transport is achieved in the refining industry. Data collected on multiple on-line and laboratory FTNIR analyzers located in multiple countries are considered, and the ultimate limitations discussed.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.562-570
• /
• 1995

근래의 ABB/CE형 가압경수로들은, 정상운전 및 예상운전과도상태 중에 허용핵연료설계제한치가 위배되는 것을 방지하기 위하여, 노심 운전상태를 감시하는 디지탈노심감시계통, COLSS(Core Oper-ating Limit Supervisory System)를 보유하고있다. COLSS의 주요 기능 중 하나는. 측정되는 운전조건에 대한 최소 핵비등이탈률을 계산하여, 핵비등이탈에 대한 과출력여유도를 감시하는 것이다. COL-SS에서 최소 핵비등이탈률을 계산하는데 사용되는 CETOP-D 모델은 상세부수로분석코드인 TORC 모델에 대해 보수적으로 벤치마킹되며, 보정상수로서 고온집 합체의 입구유량인자를 사용하고 있다. 본 연구에서는 CETOP-D 입구유량인자를 가장 제한적인 운전조건에서 보수적인 단일 값으로 결정하는 ABB/CE 방법을 배제하고, 운전조건에 따른 CETOP-D 입구유량인자 변화를 상관식형태로 결정하는 “CETOP-D 입구유량인자 최적화기법”을 개발하였다. 개발된 방법을 영광 3,4호기 초기노심의 노심운전영역에 적용한 결과, 기존의 ABB/CE 방법에 비하여 정상운전영역에서 핵비등이탈에 대한 과출력여유도가 2% 가량 증가하였다.

• 원자력산업
• /
• 제13권3호통권121호
• /
• pp.54-58
• /
• 1993