• 한국압력기기공학회 논문집
• /
• 제14권1호
• /
• pp.58-65
• /
• 2018

The purpose of this study is to develop a Half Nozzle Repair(HNR) process to prevent the leakage from welds on small bore piping in Reactor Coolant System. The Codes & Standards of tempered bead and design requirements of J-Groove welds are reviewed. Automatic machine GTAW welding and machining equipments are developed to perform HNR process. Single pass welding and overlay welding equipments are conducted in order to obtain the optimal temper bead welding process parameters with Alloy 52M filler wire. Coarse grain heat affected zone(CGHAZ) is formed by rapid cooling rate in heat affected zone after welding. Accordingly, a proper temper bead technique is required to reduce CGHAZ in 1-Layer of welds by 2- and 3-Layers. Mock-up tests show that the developed HNR process is possible to meet ASME Code & Standard requirements without any defect.

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.28-34
• /
• 2015

This paper addresses the problems of using anti-freeze lubricants for different machines that must function at extremely low temperatures during winter operation in the Republic of Sakha (Yakutia). We discuss the possibility of obtaining anti-freeze base oils from Talakan crude oil, an area with major oil and gas deposits of the Republic of Sakha, and also provide the trade and technological classification of Talakan crude oil. We propose two different schemes for processing Talakan crude oil: the fuel scheme (obtaining light and heavy fractions as a fuel oil) and the base oil scheme (obtaining light fractions and base oils). We investigate the influence of pour point depressants on alkyl-methacrylate base on the low-temperature properties of the fractions obtained from Talakan crude oil and Korean base oils, and establish the optimal concentration of pour point depressants. We compare the properties of these fractions with the low-temperature properties of Korean base oils and find that the commercial oil "Ravenol 0W-40" provides optimistic results. We obtain oil with a pour point of minus $50^{\circ}C$ and a viscosity index greater than 100. The Design of Experiment was used to establish the optimum composition of the pour point depressants and the base oil S-8 to obtain lubricant oil with a kinematic viscosity of 17 cSt, viscosity index of 208, and a pour point of minus $64^{\circ}C$.

• 대한의생명과학회지
• /
• 제10권3호
• /
• pp.211-217
• /
• 2004

For discrimination of ductal and ascinar cells, we isolated a single-chain variable domain fragment (scFv) antibody against ductal cells of salivary gland using phage display technique. From the spleen of a mouse immunized with ductal cell lysate, total RNA was prepared and used as a template for cDNA synthesis of antibody genes. The scFv genes were constructed with variable domain genes of heavy and light chain and were introduced into pCANTAB5E to construct phage scFv library. The phage particles specific for acinar cells were screened by subtraction using immunotubes coated with acinar and ductal cell lysate and enzyme-linked immunoabsorbance assay (ELISA). The characteristics of the scFv were determined by immunohistochemistry (IHC) and the result indicated that the isolated scFv has the specificity against ductal cells of salivary glands and tubules of kidney. And the scFv has an unique binding activity specific for Hashimoto's thyroiditis. The nucleotide sequence of isolated scFv gene was determined and revealed that V/sub H/ belongs to the mouse H-chain family subgroup IB and V/sub L/ to the mouse L-chain family subgroup III.

• KIEAE Journal
• /
• 제10권2호
• /
• pp.3-8
• /
• 2010

Many countermeasures are presented to make excessive earth circumstance pollution better in the earth. A lot of researches are in progress to lessen $CO_2$ among the industries exhausting it. The industries manufacturing cement are making many countermeasures. Many concernments on ECO-friendly materials, rather than cement, are increased, and researches are in progress to develop them. Lime, material mostly used before Portland cement appeared, attracts the Occident as well as the Orient. In the Occident, lime mortar was used in common, for maintaining and repairing cultural properties, too. This study is aimed at offering basic materials for the modern use of lime, ECO-friendly material. This study measured the change of intensity and weight with lime, sand, and earth, basic materials of Samhoimool. As a result, at the beginning, hydrated lime displayed its density late, but as time was gone, density was promoted continuously. In addition, density was promoted, when it was given heat at the beginning. If heat-generation reaction of quicklime and water was used, density was promoted at the beginning, but liquidity showed a drop.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.317-319
• /
• 1993

The function estimation characteristics of neural networks can be used for sensor signal validation of a system. In case of applying the neural networks to signal validation, it is a important problem that the redundant sensor signals used as a input signal of neural networks should be validated. In this paper, we simplify the conventional parity space method in order to input the validated signal to the neural networks and also propose the sensor signal validation method, which estimates the reliable sensor output combining neural networks with the simplified parity space method. The acceptability of the proposed signal validation method is demonstrated by using the simulation data in safety injection accident of nuclear power plants.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1657-1659
• /
• 1997

Electron temperature and electron density were measured in a radio-frequency inductively coupled plasma (RFICP) using a probe measurements. Measurement was conducted in an argon discharge for pressures from 10 [mTorr] to 40 [mTorr] and input rf power from 100 [W] to 800 [W], Ar flow rate from 5 [sccm] to 30 [sccm], Spatial distribution electron temperature and electron density were measured for discharge with same aspect ratio (R/L=2). Electron temperature and electron density were discovered depending on both pressure and power, Ar flow rate. Electron density was increased with increasing input power and in creasing pressure, increasing Ar flow rate. Radial distribution of the electron density was peaked in the plasma center. Normal distribution of the electron density was peaked in the center between quartz plate and substrate. From these results, We found out the generation mechanism of Radio-Frequency Inductively Coupled Plasma.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1862-1864
• /
• 2000

Recently diagnostic techniques have been investigated to detect a partial discharge(PD) associated with a dielectric material defect in a high-voltage electrical apparatus. Among the PD measuring method, detecting electromagnetic wave generated by PD is one of the most effective method because PD radiates wide frequency of electromagnetic wave up to UHF. From the above points of view, we have investigated the polarization and distance characteristics of electromagnetic wave radiated by an insertion of solid insulators between needle-plane electrodes in the air. According to the magnitude of applied voltage, the frequency spectrum of radiated electromagnetic waves were increased about under 100(MHz), compared with background noise. The electromagnetic wave magnitude is attenuated about 4$\sim$7.6[dB] at the point 3[m] away from PD.

• Journal of Preventive Veterinary Medicine
• /
• 제41권3호
• /
• pp.121-123
• /
• 2017

The hepatitis E virus (HEV) is a leading causative agent of acute hepatitis in humans. Zoonotic HEV strains have been isolated from several animal species, including pigs. New HEV variants have been recently isolated from camels in the Middle East. In the present study, fecal samples from fallow deer, formosan deer, alpaca, and guanaco were analyzed for the detection of HEV. One HEV strain was detected from guanaco, a species of camelids. The nucleotide sequence of guanaco HEV was identical to those of deer HEV-3 strains, which implied the cross-species transmission of HEV-3 from deer to guanaco.

• KIEAE Journal
• /
• 제8권5호
• /
• pp.55-60
• /
• 2008

The purpose of this study is to increase the use of Hwangto and examine the strength according to what it is compounded with. Hwangto-concrete containing Hwanto without cement nor organic chemical products were compared to the traditional cement concrete through some durability experiments. We expect to gain more knowledge on the potentials of Hwangto-concrete as an architectural source. 1) As Hwangto binder amount rises, the value of slump increases too. The reason is that the increase of the quantity of cement causes the increase of the amount of material and the decrease of the amount of aggregate. 2) When the mixed component into Hwangto-concrete remains at 2%, the compress strength is generally dispersed high along the per unit fission, in case the amount of which is at $400(g/m^3)$. The highest compress strength is 39MPa. It means that it can be applied to common structures and we need to conduct a basic property test to ensure the strength and fluidness. 3) Hwangto-concrete is expected to be highly used in the ocean structure and chemical industry because it has better resistance to sulfuric acid and to hydrochloric acid than the cement-concrete has. The result of this study is as follows. It is expected that Hwangto-concrete will be widely applied and further research on its durability and tests for its basic substantial characteristics based on future component added to it.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.137-144
• /
• 2006

Oil-fired power plants usually use several burners and the combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner evenly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and uneven supplies of combustion air to each burner are induced by these unbalanced flow distribution in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in the windbox and measured the velocities at the exit of burners in the real windbox to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric and this increases the pollutant products like CO.