• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.675-679
• /
• 2007

The control method of programmable dynamometer for overall test of machine is to load reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of moter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for moter torque of programmable dynamometer. Therefore, this kind of system could not perform dynamic and nonlinear load. In this paper, the control method using the load torque observer without a measure for torque transducer is proposed. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction moter. Therefore, the torque controller is not affected by a load torque disturbance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.43-45
• /
• 2013

The purpose of this study is to obtain basic data for making performance criteria about the structural safety of lightweight dry wall later by examining types and characteristics of horizontal load acting on the wall. The subjects applying horizontal load to the wall are human and objects. The types of horizontal load are classified as static load and dynamic load depending on the difference of acting time. The magnitude of horizontal load "0.25kN/㎡" defined by KBC 2009 has no significant meaning since it is the unsubstantial nominal load. The result of examining types and characteristics of horizontal load is as follows. (1) Static load by human needs to have more systematic investigation including differences in wall hardness and human weight. (2) Dynamic load by human needs to raise the significance of study result by increasing the number of subjects. (3) Dynamic load by objects needs to accumulate the load specific data for various load subjects considering real situations.

• 자동차안전학회지
• /
• 제3권2호
• /
• pp.5-10
• /
• 2011

Under the full frontal crash event, seatbelt system is the most typical and primary restraint device that prevents the second impact between an occupant and vehicle interior parts by limiting the forward motion of an occupant in the vehicle occupant packaging space. Today's restraint systems typically include the three-point seat belt with the pretensioner and the load limiter. A pretensioner preemptively tightens the seat belts removing any slack between a passenger and belt webbing which leads to early restraint of a passenger. After that a load limiter controls level of belt load by releasing the belt webbing to reduce occupant injurys. In this study, load characteristics of load limiters are optimized by the computer simulation with a MADYMO model for a frontal impact against the rigid wall at 56kph and then we suggest performance requirements. We derived optimum load characteristic from the results using four vehicle simulation models represented by the vehicle. Based on the results, we suggest the performance from the results of the second optimization using the simulation considering the design and the standardization. Finally, the performance requirements is verified by the sled tests including the load limiter device for the full vehicle condition.

• 정보처리학회논문지A
• /
• 제12A권5호
• /
• pp.427-432
• /
• 2005

웹 클러스터 시스템에서 사용자들의 접속 요구를 효율적으로 real 서버에 분산시키기 위하여 기존의 부하분산 알고리즘들과 현재 많이 사용중인 WLC(Weighted Least Connection) 알고리즘에 대하여 연구하였다. 이 부하분산 알고리즘들은 서버들의 부정확한 부하상태 파악과 파악 시점에 문제가 있어 서버들 간에 부하 불균형이 발생함으로써 효율성이 저하된다. 본 연구에서는 사용자의 접속 요청 시 broadcasting RPC(Remote Procedure Call)를 이용하여 서버들의 다양한 부하상태를 실시간으로 파악하여 부하를 분산하는 알고리즘을 제안하고, prototype을 구현하여 성능을 실험하였다. 실험 결과, real 서버 간 부하 불균형 현상이 기존 방법에 비하여 크게 향상되었고, 응답시간이 단축되는 효과로 웹 클러스터 시스템의 성능이 향상되었다.

• 한국ITS학회 논문지
• /
• 제8권3호
• /
• pp.71-82
• /
• 2009

As a solution to spectrum under-utilization problem, Cognitive radio (CR) introduces a dynamic spectrum access technology. In the area, one of the most important problems is how secondary users (SUs) should choose between the available channels, which means how to achieve load balancing between channels. We consider spectrum load balancing problem for CR system in frequency domain and especially in time domain. Our objective is to balance the load among the channels and balance the occupied time length of slots for a fixed channel dynamically in order to obtain a user-optimal solution. In frequency domain, we refer to Dynamic Noncooperative Scheme with Communication (DNCOOPC) used in distributed system and a distributed Dynamic Spectrum Load Balancing algorithm (DSLB) is formed based on DNCOOPC. In time domain, Spectrum Load Balancing method with QoS support is proposed based on Dynamic Feed Back theory and Hash Table (SLBDH). The performance of DSLB and SLBDH are evaluated. In frequency domain, DSLB is more efficient compared with existing Compare_And_Balance (CAB) algorithm and gets more throughput compared with Spectrum Load Balancing (SLB) algorithm. Also, DSLB is a fair scheme for all devices. In time domain, SLBDH is an efficient and precise solution compared with Spectrum Load Smoothing (SLS) method.

• Structural Engineering and Mechanics
• /
• 제33권6호
• /
• pp.765-779
• /
• 2009

Quantitative condition assessment of structures has been traditionally using proof load test leading to an indication of the load-carrying capacity. Alternative approaches using ultrasonic, dynamics etc. are based on the unloaded state of the structure and anomalies may not be fully mobilized in the load resisting path and thus their effects are not fully included in the measured responses. This paper studies the effect of the load carried by a reinforced concrete beam on the assessment result of the crack damage. This assessment can only be performed with an approach based on static measurement. The crack damage is modelled as a crack zone over an area of high tensile stress of the member, and it is represented by a damage function for the simulation study. An existing nonlinear optimization algorithm is adopted. The identified damage extent from a selected high level load and a low load level are compared, and it is concluded that accurate assessment can only be obtained at a load level close to the one that creates the damage.

• 전력전자학회논문지
• /
• 제22권6호
• /
• pp.527-534
• /
• 2017

This paper proposes a new DC link voltage controller for a single-phase power factor correction (PFC) boost converter. The load current of the PFC boost converter affects the capacitor current, whereas the load current changes the output voltage. However, previous works that compensate output current have failed to consider the relationship between load current and duty. Thus, they also fail to maintain a constant output voltage if the load fluctuates under the conditions of a non-rated input voltage. By considering the duty in the load current compensation, the proposed method improves the load transient response regardless of the input voltage. To demonstrate its effectiveness, the proposed method is compared with other control methods by conducting PSM simulations and experiments under a rapidly changing load.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3094-3109
• /
• 2014

This paper proposes a load balanced reliable routing protocol called LBR (Load Balanced Reliable routing) in wireless networks. The LBR protocol transmits messages through a reliable path considering the balancing of the traffic load. Recently, the authors have proposed a multipath-based reliable routing protocol called MRFR, which is an appealing protocol for fault tolerant reliable data transmission. However, However, MRFR has no concern with the problem of load balancing, which results in increasing congestion and consuming high energy at some network nodes. As a result, the problem affects negatively the performance of the network. Taking account of load balancing as a route selection criteria can avoid routing through the congested nodes and allows to find better routes. In this paper, we extend MRFR by considering load balancing in the route discovery process of reliable communication. The simulation results showed that the proposed protocol outperforms AODV in terms of end-to-end delay, packet delivery radio, and average jitter. Compared to MRFR, the LBR protocol has the same packet delivery ratio, and obtains a better efficiency of load balancing.

• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.946-954
• /
• 2004

A model in the form of a Bearing Load Distribution (BLD) matrix in the Multi Bearing Rotor System (MBRS) is established by a transfer matrix equation with the consideration of a bearing load, elevation and uniform load distribution. The concept of Bearing Load Sensitivity (BLS) is proposed and matrices for load and elevation sensitivity are obtained. In order to share MBRS design resources on the Internet with remote customers, the basic principle of Remote Computing (RC) based on the Internet is introduced ; the RC of the BLD and BLS is achieved by Microsoft Active Server Pages (ASP) technology.

• Structural Engineering and Mechanics
• /
• 제15권3호
• /
• pp.345-365
• /
• 2003

The adoption of fibre reinforced polymer (FRP) rebars (whose behaviour is elastic-brittle) in reinforced concrete (RC) cross sections requires the assessment of the influence of time-dependent behaviour of concrete on the load-carrying capacity of these sections. This paper presents a method of computing the load-carrying capacity of sections that are at first submitted to a constant long-term service load and then overloaded up to ultimate load. The method solves first a non-linear visco-elastic problem, and then a non-linear instantaneous analysis up to ultimate load that takes into account the self-equilibrated stress distribution previously computed. This method is then adopted to perform a parametric analysis that shows that creep and shrinkage of concrete increase the load-carrying capacity of the cross section reinforced with FRP and allows for the suggestion of simple design rules.