• 동아시아식생활학회지
• /
• 제23권1호
• /
• pp.61-68
• /
• 2013

This study tested the development of bechamel sauce with different ratios of soy milk to milk(0:4, 1:3, 1:1, 3:1, 4:0) to examine changes in quality characteristics. Proximate composition analysis showed a decrease in salinity with increasing amounts of soy milk, while the moisture content and, density increases. The highest pH values were found for a 1:1 ratio of soy milk to milk (S2) and the lowest pH values were found for a 0:4 ratio of soy milk to milk (CON). The L-value decreased, while a and b values increased with increasing amounts of soy milk. In the stability test, segregation occurred in CON after 5 days, while the highest segregation occurred at a 4:0 ratio of soy milk to milk (S4). The sensory evaluation results showed that the color, thickness, savory flavor, and savory taste increased with increasing amounts of soy milk. In the acceptance test, a 1:3 ratio of soy milk to milk (S1) and a 1:1 ratio of soy milk to milk (S2) had the highest acceptance scores (p<0.001) for appearance, taste, texture, and overall acceptance.

• 한국학교ㆍ지역보건교육학회지
• /
• 제14권3호
• /
• pp.89-99
• /
• 2013

Objectives: This study was designed to examine the effects of oral health behaviors and use of dental clinics on periodontal diseases in women, the purpose of this study is to provide basic information to develop program for dental health promotion in young women. Methods: We conducted a survey targeting 486 women that agreed with the survey and were going to dental clinic from October 1, 2013 to October 18, 2013. We surveyed them by self-administered questionnaire and analyzed it by SPSS Win 19.0 program. Results: 1. For differences in periodontitis according to general characteristics, if th age is high, ratio of periodontitis is high. Married woman is higher than single one in ratio of periodontitis. Also the more number of birth, the higher ratio of periodontitis is.(p<.05) 2. For differences of periodontitis by dental care behavior, ratio of periodontitis of non-smokers is significantly low. For one that brush one's teeth broadside, the ratio of periodontitis is high.(p<.05) 3. For differences of periodontitis by use of dental clinic service, ratio of periodontitis of one that have more times visit to a dental clinic, more annual average cost for dental care, and regular dental check-ups is relatively low.(p<.05). 4. For determinant factors influencing on periodontitis, ratio of periodontitis of one that is old, have more stress, have a low level of education, and have preventive dental care is high. Ratio of periodontitis of one that have less toothbrushing and brush one's teeth after having lunch or a snack and before sleeping is significantly low. Conclusions: From this study, dental health behavior as the factor influencing on periodontitis of young women is statistically meaningful. Because this dental health behavior has a lot of potential to be improved by government and local community efforts such as education and social support, we think that systematic and various educational program development is needed to strengthen self dental care ability effectively with policy support.

• 환경위생공학
• /
• 제13권1호
• /
• pp.91-103
• /
• 1998

Design data for COD and nitrogen removal from wastewater were collected from Pilot's Multi-stage Bio-reactor. Hyraulic conditions and pollutant loadings were varied in order to optimize the biological and operational parameters. Pilot's experimental results summarize as followings. 1. T-N removal efficiency in the organic volumetric loading 0.2 kgCOD/m$^{3}$·d was obtained as maxium of 85% at internal recycle ratio 2.5 and in more ratio than this it was decreased. Organic removal efficiency was about 91% under the overall experimental conditions and not influenced by recycle ratio.. 2. Nitrification reaction was shown as maxium in the SCOD$_{cr}$/NH$^{+}$-N ratio of 6.5 and in more ratio than this it was decreased. Denitrification rate was the maxium as 85% in more than 7.5 of SCOD$_{cr}$/NO$_{x}$-N ratio and in the ratio over this ratio it becomes constant. 3. By utilizing an applied new model of Stover-Kincannon from Monod's kinetic model, concentration of T-N in the effluent according to flow quanity in the influent was estimated as 8.74 and -67.5 respectively. The formula for estimating T-N concentration of effluent was obtained like this: N$_e$=N$_0$(1- $\frac{8.74}{(QN$_0$/A)-67.05}$)

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.497-509
• /
• 1995

Effectiveness of multiple tuned mass dampers (MTMD) in suppressing the dynamic response of base excited structure for first mode vibration is investigated. The effectiveness of the MTMD is expressed by the ratio of the root mean square (RMS) displacement of the structure with MTMD to corresponding displacement without MTMD. The frequency content of base excitation is modelled as a broad-band stationary random process. The MTMD's with uniformly distributed natural frequencies are considered for this purpose. A parametric study is conducted to investigate the fundamental characteristics of the MTMD's and the effect of important parameters on the effectiveness of the MTMD's. The parameters include: the fundamental characteristics of the MTMD system such as damping, mass ratio, total number of MTMD, tuning frequency ratio, frequency spacing of the dampers and frequency content of the base excitation. It has been shown that MTMD can be more effective and more robust than a single TMD with equal mass and damping ratio.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.385-390
• /
• 2006

A fast response $CO_2$ analyzer has been developed to study transient characteristics on an SI engine. The analyzer has the delay time of 4.5 ms and time constant of 2.8 ms, which is fast enough to measure $CO_2$ concentration on a transient condition. Wide range of A/F(Air/Fuel) ratio can be estimated using the analyzer with an additional switch type oxygen sensor. The results of measurement of $CO_2$ concentration and A/F ratio on a transient condition including rapid acceleration/deceleration and EGR(Ehxaust Gas Recirculation) on/off are presented and compared with a commercial exhaust gas analyzer and UEGO(Universial Exhaust Gas Oxyzen) sensor.

• Journal of the Korean Statistical Society
• /
• 제16권2호
• /
• pp.92-101
• /
• 1987

Our interest is to access in some way teh relative odds or probability that a multivariate observation Z belongs to one of k multivariate normal populations with unequal covariance matrices. We derived the empirical Bayes posterior odds ratio for the classification rule when population parameters are unknown. It is a generalization of the posterior odds ratio suggested by Gelsser (1964). The classification rule does not have complicated distribution theory which a large variety of techniques from the sampling viewpoint have. The proposed posterior odds ratio is compared to the Gelsser's posterior odds ratio through a Monte Carlo study. The results show that the empiricla Bayes posterior odds ratio, in general, performs better than the Gelsser's. Especially, for large dimension of Z and small training sample, the performance is prominent.

• 대한치과보철학회지
• /
• 제39권2호
• /
• pp.220-229
• /
• 2001

This study was performed to evaluate the fracture resistance of three improved die stone materials according to water/powder ratio. There are lots of handling conditions which affect the physical properties of improved dental stone, and it's well known that the water/powder ratio significantly affect the strength of die stone. If water/power ratio was incorrect, following disadvantages were showed : (1) susceptibility to dimensional change due to abrasion, (2) limited reproduction of fine detail, (3) lack of strength. The maxillary master casts were made of additional silicone impressions(Exaflex, GC America. Inc. USA). Three type IV die stones such as Fuji Rock (GC Europe Intreleuvenlaan, Leuven, Belgium), Velmix(Kerr, Manufacturing company, USA), and Crytal Rock( Maruishi Gypsum Co. Ltd, Japan) were tested. A total of 160 casts were prepared, separated, and tested on the Instron Testing Machine(Model 4201, Co. USA). The obtained results of this study were as follows : 1. Fuji Reck and Velmix less 3ml than the water/power ratio of manufacturer's instruction showed the highest resistance to fracture. According to increasing water/powder ratio, fracture resistance was significantly increased(P<0.05). Crystal Rock showed the highest fracture value when it was mixed with the water/power ratio of manufacturer's instruction. 2. Water/powder ratio of the manufacturer's instructions and less 3ml than that showed lower fracture value of hand mix than that of vacuum mix. Water/powder ratio of more 3ml, 6ml than manufacturer's instructions was not significantly different between hand mix and vacuum mix(p>0.05). 3. Velmix had the highest viscoelastic value among three die materials when it was mixed with the manufacturer's instruction. Viscoelasticity was decreased according to increasing water/powder ratio.

• Current Photovoltaic Research
• /
• 제11권3호
• /
• pp.67-74
• /
• 2023

The earth-abundant element-based Cu₂ZnSn(S,Se)₄ (CZTSSe) thin film solar cells (TFSCs) have attracted greater attention in the photovoltaic (PV) community due to their rapid development in device power conversion efficiency (PCE) >13%. In the present work, we demonstrated the fine-tuning of the bandgap in the CZTSSe TFSCs by altering the sulfur (S) to the selenium (Se) chalcogenide ratio. To achieve this, the CZTSSe absorber layers are fabricated with different S/(S+Se) ratios from 0.02 to 0.08 of their weight percentage. Further compositional, morphological, and optoelectronic properties are studied using various characterization techniques. It is observed that the change in the S/(S+Se) ratios has minimal impact on the overall Cu/(Zn+Sn) composition ratio. In contrast, the S and Se content within the CZTSSe absorber layer gets altered with a change in the S/(S+Se) ratio. It also influences the overall absorber quality and gets worse at higher S/(S+Se). Furthermore, the device performance evaluated for similar CZTSSe TFSCs showed a linear increase and decrease in the open circuit voltage (V_oc) and short circuit current density (J_sc) of the device with an increasing S/(S+Se) ratio. The external quantum efficiency (EQE) measured also exhibited a linear blue shift in absorption edge, increasing the bandgap from 1.056 eV to 1.228 eV, respectively.

• 대한산업공학회지
• /
• 제35권2호
• /
• pp.141-149
• /
• 2009

As the number of personal computers installed in vehicles increases, a touchpad often used in a labtop computer can be used for the control of an in-vehicle information system (IVIS). Using a touchpad to control the system allows the user to select among large amount of information with a single touch of dragging. For safety and convenience of a driver, the touchpad could be placed on a steering wheel. This research is designed to calculate the most efficient Control-Response Ratio (C/R ratio) for the menu interaction of a touchpad on a steering wheel. Since the menu pointer's rate of movement and proper C/R ratio is determined by the amount of selected information, the amount of displayed information and the movement of a menu pointer was chosen to be independent variables. The dependent variables are a user's preference and task completion time. Two factor full factorial within subject design was used 16 subjects. The investigation revealed that the amount of selected information increased with increasing C/R ratio. The movement of the pointer became slower as the amount of information increased. The best C/R ratio was calculated for each amount of information and preference regression of the user's preference was drawn accordingly. Through this research, the automobile interior designer can benefit from the guidelines suggested for the touchpad control.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1932-1940
• /
• 2004

Although the previous researches evaluated the fatigue behavior of Al/GFRP laminates using the traditional fracture mechanism, their researches were not sufficient to do it : the damage zone of Al/GFRP laminates was occurred at the delamination zone instead of the crack-metallic damages. Thus, previous researches were not applicable to the fatigue behavior of Al/GFRP laminates. The major purpose of this study was to evaluate delamination behavior using the relationship between crack length (a) and delamination width (b) in Al/GFRP laminate. The details of investigation were as follows: 1) Relationship between the crack length (a) and the delamination width (b), 2) Relationship between the delamination aspect ratio (b/a) and the delamination area rate ((A$\_$D/)/subN// (A$\_$D/)$\_$All/), 3) The effect of delamination aspect ratio (b/a) on the delamination shape factor (f$\_$s/) and the delamination growth rate (dA$\_$D// da). As results, it was known that the delamination aspect ratio (b/a) was decreased and the delamination area rate ((A$\_$D/)$\_$N// (A$\_$D/)$\_$All/) was increased as the normalized crack size (a/W) was increased. And, the delamination shape factors (f$\_$s/) of the ellipse-II(f$\_$s3/) was greater than of the ellipse-I(f$\_$s2/) but that of the triangle (f$\_$s1/) was less than of the ellipse-I(f$\_$s2/).