• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.4 s.117
• /
• pp.105-115
• /
• 2006

Biotope Area Ratio ($BFF; BiotopFl{\"{a}}chenFaktor$) was developed in Berlin, Germany in 1990s and introduced to Korea in 1999. It is the ratio of the uncovered soil areas which have the natural circulating capability compared to whole development areas. This study seeks for alternative ways to increase Biotope Area Ratio of residential areas in the metropolitan areas of Korea by investigation on new housing developments. The study investigates four new towns including Seoul Eunpyung new town, Yongin Kusung district, Goyang Pungdong and Juyeopdong districts and Hwasung Dongtan district. The Biotope Area Ratio of study sites is between 23.51 % and 40.69%. This result is not relevant to land use conditions, such as the building-ta-land ratio, natural ground green area ratio. This ratio satisfies the minimum requirements of City of Seoul, except 2 sites. Considering that the study sites are relatively low density land use areas compared to Seoul's average, thus, a higher standards is necessary for new town housing complexes. Because Biotope Area Ratio includes artificial ground green area ratio, Biotope Area Ratio is possible can be increased with decreased natural ground green area ratio. And so, when Biotope Area Ratio is applied to new town development, it must go side by side with a definite natural ground green area ratio.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.6
• /
• pp.727-737
• /
• 2010

Together with the Young's modulus the Poisson's ratio is another independent material parameter that governs the behavior of a structural system. Therefore, it is meaningful to evaluate separately the influence of the parameter on the random response of the structural system. To this end, a formulation dealing with the spatial randomness in the Poisson's ratio in laminated composite plates is proposed. The main idea of the paper is to transform the fraction form of the constitutive coefficients into the expanded form in an ascending order of the stochastic field function. To validate the adequacy of the formulation, a square plate is chosen and the computation results are compared with those obtained using conventional Monte Carlo simulation. It is observed that the results show good agreement with those by the Monte Carlo simulation(MCS).

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.223-226
• /
• 2005

In order to acquire 3 components data which has the good signal to noise ratio with only one shot, 3-C geophones were used, As a result, the vertical component showed the distinct first arrival of P-wave, and the horizontal component was improved the signal to noise ratio of S-wave, while was attenuated P-wave. The 2-D Poisson's ratio section was computed from P- and S-wave cell velocities included velocity tomograms of the P- and S-waves. The Poisson's ratio values were computed in the range of $0.2{\~}0.3$. With one shot, we can obtain 2-D distribution of dynamic Poisson's ratio as well as velocity tomograms of P- and S-waves.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.349-356
• /
• 2020

This paper introduces the implementation of a driver's condition warning system using eye aspect ratio to prevent a car accident. The proposed driver's condition warning system using eye aspect ratio consists of a camera, that is required to detect eyes, the Raspberrypie that processes information on eyes from the camera, buzzer and vibrator, that are required to warn the driver. In order to detect and recognize driver's eyes, the histogram of oriented gradients and face landmark estimation based on deep-learning are used. Initially the system calculates the eye aspect ratio of the driver from 6 coordinates around the eye and then gets each eye aspect ratio values when the eyes are opened and closed. These two different eye aspect ratio values are used to calculate the threshold value that is necessary to determine the eye state. Because the threshold value is adaptively determined according to the driver's eye aspect ratio, the system can use the optimal threshold value to determine the driver's condition. In addition, the system synthesizes an input image from the gray-scaled and LAB model images to operate in low lighting conditions.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.153-163
• /
• 2007

An adaptive framework paradigm where the bandwidth values of the ongoing calls vary according to the trafficsituations is one of the promising concepts for overcoming poor resource conditions due to handoffs in mobilecellular networks. However, quantifying the level of bandwidth degradation of the ongoing calls in an adaptiveframework is important in view of Quality of Service (QoS) Provisioning. Therefore we introduce new QoSparameters, the Degradation Degree Ratio (DDR), which represents the average portion of the degradationdegree during degradation pehod of a call, and the Degradation Area Ratio (DAR), which represents the averageratio of a call's degradation level considering both the period and the degree of degradation jointly in multi-levelbandwidth service. We also develop a new analytical model for estimating the QoS measures such as theDegradation Pehod Ratio (DPR), DDR and DAR. We show how to calculate the QoS measures and illustrate themethod by numerical examples. The proposed model can be used to determine the optimal parameter of theCAC scheme and analyze the sensitivity ofthe QoS parameters in adaptive networks.

• Journal of Nutrition and Health
• /
• v.28 no.2
• /
• pp.95-106
• /
• 1995

The effects of various n-6/n-3 ratios(about 2, 4, 6, 8) of dietary fatty acids on various lipid levels and prostaglandin production were studied at the constant P/S ratio (1.5-1.6) in young (5 weeks old) and adult(8 months old) Sprague-Dawley rats using palm oil, safflower oil and sardine oil. The concentration of serum cholesterol tended to increase with the increasing n-6/n-3 ratio. The tendency of HDL-cholesterol levels was similar to serum cholesterol levels. These were not apparent differences between young and adults rats. Serum triglyceride levels increased according to increasing n-6/n-3 ratio in young rats. These were generally high in the adult rats compared with the young rats. Though liver cholesterol level tended to increase according to the increasing n-6/n-3 ratio in the young rats. The liver triglyceride level did not change according to the n-6/n-3 ratio. However, these levels were apparently higher in the adult than in the young rats. The fatty acid compositions of phosphatidylcholine(PC) were similar in serum and liver. The arachidonate/linoleate ratios in tissue PC were influenced by the n-6/n-3 ratio. They tended to be lower in the adult rats compared with the young rats. It was suggested that the activity of $\Delta$6-desturase was decreased by aging. Production of platelet thromboxane A2(TXA2)and aortic prostacyclin(PGI2) was not apparently influenced with n-6/n-3 ratio. Whereas the ratio of TXA2/PGI2 was the lowest value at 3.8 of n-6/n-3 ratio, expecially in the young rats. Thus this ratio seemed to be a desirable level to protect atherosclerosis. These results indicate that the lipid level and prostaglandin production were influenced not only by n-6/n-3 ratio(under constant P/S ratio) but by aging, particulary triglycerde level and arachidonic/linoleic acid ratio.

• Smart Structures and Systems
• /
• v.17 no.3
• /
• pp.471-489
• /
• 2016

Modal identification based on ambient vibration data has attracted extensive attention in the past few decades. Since the excitation for ambient vibration tests is mainly from the environmental effects such as wind and traffic loading and no artificial excitation is applied, the signal to noise (s/n) ratio of the data acquired plays an important role in mode identifiability. Under ambient vibration conditions, certain modes may not be identifiable due to a low s/n ratio. This paper presents a study on the mode identifiability of an instrumented cable-stayed bridge with the use of acceleration response data measured by a long-term structural health monitoring system. A recently developed fast Bayesian FFT method is utilized to perform output-only modal identification. In addition to identifying the most probable values (MPVs) of modal parameters, the associated posterior uncertainties can be obtained by this method. Likewise, the power spectral density of modal force can be identified, and thus it is possible to obtain the modal s/n ratio. This provides an efficient way to investigate the mode identifiability. Three groups of data are utilized in this study: the first one is 10 data sets including six collected under normal wind conditions and four collected during typhoons; the second one is three data sets with wind speeds of about 7.5 m/s; and the third one is some blind data. The first two groups of data are used to perform ambient modal identification and help to estimate a critical value of the s/n ratio above which the deficient mode is identifiable, while the third group of data is used to perform verification. A couple of fundamental modes are identified, including the ones in the vertical and transverse directions respectively and coupled in both directions. The uncertainty and s/n ratio of the deficient mode are investigated and discussed. A critical value of the modal s/n ratio is suggested to evaluate the mode identifiability of the deficient mode. The work presented in this paper could provide a base for the vibration-based condition assessment in future.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.160-163
• /
• 2008

In this paper, an auto-diagnosis method of the stator winding fault for small induction motor is suggested. 3-phase stator currents are sampled, filtered, and transformed with Park's vector transformation. After then Park's vector patterns are obtained. To detect the stator winding fault automatically, a distortion ratio is newly defined and compared with the one of healthy motor, and the threshold levels of distortion ratio are suggested. The 2-turn, 4-turn, 8-turn winding fault are tested with no load, 25%, 50%, 75%, and 100% rated load. The distortion ratio of the Park's vector patterns are increased as the increase of the faulted turns, but are same as the increase of the load.

• Journal of Nutrition and Health
• /
• v.15 no.1
• /
• pp.47-53
• /
• 1982

The study was designed to observe the effects of dietary intake of three different levels of polyunsaturated to saturated fatty acid (P/S) ratio on plasma HDL - cholesterol and triglyceride in plasma and tissues of adult rats. Rats were assigned into the three diet groups, composed of protein 24%, carbohydrate 46%, and fat 30% of total caloric intake. However, the P/S ratio of fat was adjusted by using beef tallow, corn oil and perilla oil to give 0.2, 1.1 and 6.0. All groups were fed ad libitum for 4 week. Plasma cholesterol level was decreased but net significantly with increasing P/S ratio of dietary fat, and showed significant negative correlation coefficient. Plasma TG level was also decreased with increasing PUFA level of dietary fat. However, the effect of P/S ratio (6.0) was not greater than that of P/S ratio (1.1) on plasma TG concentration. This implied that high level of PUFA was not required to change plasma TG level as much in the case of HDL-cholesterol. Plasma HDL-cholesterol was significantly increased only in the group of P/S ratio 6.0 which suggested that high level of dietary PUFA was required to increase HDL level. There was a decreasing trend in the levels of total cholesterol and TG per g liver with increasing P/S ratio of dietary fat. There was no effect in the levels of TG per g skeletal muscle by P/S ratio but the level of cholesterol per unit skeletal muscle was rather increased with increased P/S ratio.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.825-831
• /
• 2012

The retrofitting of a thickening unit process is widely considered in municipal wastewater treatment plants in Korea to enhance the anaerobic digestion efficiency. The authors examined the effect of feed concentration (2-34.1 g VS/L) and feed to microorganism (F/M) ratio (0.50-1.35 g VS/g VS) on anaerobic batch digestion of sewage sludge. Methane yield over 90 mL $CH_4/g$ $VS_{feed}$ was found at a feed concentration in the range of 12-26 g VS/L and a F/M ratio below 0.6 g VS/g VS. A high F/M ratio decreased methane yield and rate with oragnic acid accumulation. As sudden increase of sewage sludge concentration prior to anaerobic digestion would jeopardize the digester performance due to the rasied F/M ratio, gradual increase of the sludge feed concentration or an additional biomass retention in the digester is recommended.