• 원예과학기술지
• /
• 제31권4호
• /
• pp.415-422
• /
• 2013

본 연구는 식물공장용 LED 챔버 시스템에서 고추냉이의 생육반응에 미치는 LED 광원 및 광질의 영향을 알아보기 위해 적색, 청색, 백색 그리고 원적색광의 단일 및 혼합처리, 적색광과 청색광의 비율 그리고 duty비 등을 다양하게 처리하여 수행하였다. 고추냉이의 생육반응은 적색 + 청색 혼합광에서 가장 높았고, 단일광 조건에서는 청색광보다 적색광 하에서 식물체 생물량이 높았다. 고추냉이의 식물체 생물량과 분얼수는 적색과 청색광의 비율이 1:1인 조건에서 가장 높았다. 적색과 청색광을 혼합하여 처리 시 고추냉이의 생육반응은 duty비가 100%일 때 높은 반면, 적색과 청색광에 백색광을 첨가하여 처리 하였을 때는 duty비가 가장 낮은 97%에서 높았다. 엽면적과 잎건중량은 적색광에서 가장 높은 반면, 비엽면적은 청색광에서 가장 높았다. 적색과 청색 혼합광에서 엽면적과 잎건중량은 적색광의 비율이 높거나, duty비가 낮을수록 증가하였고, 백색광을 첨가한 조건에서는 duty비가 높을수록 증가했다. 이상의 결과를 종합해보면, 고추냉이는 단일광을 처리하는 것보다 적색과 청색광을 혼합하여 처리해 주거나, 청색광보다 적색광의 비율을 더 높여주는 것이 고추냉이의 생육 및 품질을 향상시켜 줄것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제6권1호
• /
• pp.1-7
• /
• 2018

본 연구에서는 산업부산물을 다량 활용한 소일콘크리트의 유동성 및 강도발현에 대한 결합재-흙의 비(B/S) 및 물-결합재비(W/B)의 영향을 평가하였다. 보통 포틀랜드 시멘트의 부분 치환재로서 바이패스 더스트 10%, 고로슬래그미분말 40%, 순환유동층 플라이애시 25%가 사용되었다. 저시멘트 결합재와 함께 사질토 또는 점성토를 사용하여 18 소일콘크리트 배합이 실험되었다. 실험결과 소일콘크리트의 유동성은 대상토(점성토 또는 사질토)의 종류에 관계없이 동일한 W/B에서 B/S가 클수록 증가하였다. 압축강도는 점성토 콘크리트보다 동일 배합조건을 갖는 사질토 콘크리트에서 컸다. 산업부산물 다량 활용 소일콘크리트의 배합은 압축강도 및 고유동성을 고려하면 대상토에 관계없이 B/S가 0.35 그리고 W/B는 175%가 추천될 수 있었다.

• 대한수의학회지
• /
• 제51권1호
• /
• pp.1-6
• /
• 2011

Sixteen steers were used to investigate the efficacy of the sustained-release implant of bovine somatotropin (bST) in improving growth and feed:gain ratio during 12 weeks. Administration of the 400 mg bST implant resulted in a 16.1% increase in growth rate, and this increase was significant (p<.05). The use of the sustained-release implant did not alter (p>.05) feed intake and feed:gain ratio. Thirty-four cows were used to investigate the efficacy of the sustained-release implant of bST in milk production during 4 weeks. Administration of the 200 mg bST implant resulted in an 8.7% increase in milk production, and this increase was significant (p<.05). Twenty-four barrows were used to investigate the efficacy of the sustained-release implant of porcine somatotropin (pST) in improving growth, feed:gain ratio and backfat thickness during 6 weeks. Administration of the 120 mg pST implant resulted in a 11.4% increase in feed:gain ratio and a 60% decrease in backfat thickness, and these results were significant (p<.05). But the use of the sustained-release implant did not alter (p>.05) growth rate and feed intake.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1178-1183
• /
• 2004

The purpose of this study was to investigate the influence of compression ratio on engine performance in a LPG(Liquefied Petroleum Gas) engine converted from a diesel engine. In ordor to determine the ideal compression ratio, a variable compression ratio 4-cylinder engine was developed. Retrofitting a diesel engine into a LPG engine is technically very complicated compared to a gasoline to LPG conversion. The cylinder head and the piston crown were modified to bum LPG in the engine. Compression ratios were increased from 8 to 10 in an increment of 0.5, the ignition timing was controlled to be at MBT(Minimum Spark Advance for Best Torque) for each case.

• 한국수산과학회지
• /
• 제34권2호
• /
• pp.151-155
• /
• 2001

해양 목장에서 음향 순치 대상 어종으로 사용할 수 있는 볼락의 청각 문턱치를 기본으로 하여 음향 어법의 기초 자료를 제공할 목적으로 볼락의 백색 잡음에 대한 청각 임계비와 학습 및 유집을 위한 방성 음압 강도를 조사한 결과는 다음과 같다. 음압 73, 78, 83dB의 3단계 백색 잡음을 방성하였을 때 볼락의 청각 문턱치는 백색 잡음이 없을 때보다 높게 나타나 마스킹 현상이 나타났고, 주파수 300Hz에서 보다 높게 나타났다. 볼락의 청각 임계비는 측정 주파수 80, 100, 200, 300, 500, 800Hz에서 음압이 대략 28, 34, 26, 30, 47, 52dB이고 마스킹 현상은 주파수 300Hz에서 음압 65dB의 잡음 레벨에서 나타나기 시작하였고 그 외의 주파수에서는 음압 68dB 이상에서 나타났으며, 볼락이 주파수 $200\~300$Hz에서 신호음을 인식하기 위해서는 음압 96dB 이상, 잡음 레벨보다 약 26dB 이상의 높은 음압이 요구되었다.

• Journal of Nutrition and Health
• /
• 제27권6호
• /
• pp.574-582
• /
• 1994

The effects of age and dietary fatty acid composition on prostagladin production was investigated in Sprague-Dawley strain male rats. Animals weighing 88.6$\pm$2.2g were fed 10% dietary fat(W/W, 20% of total energy). The P/S ratios of dietary lipid were three levels(0.5, 1, 2) and there were three different levels of n-6/n-3 fatty acid ratio(2, 4, 8) in each P/S ratio. The experimental period were 1 month and 12 months, respectively. The results of this study were as follows. As the age of rats increased, the plasma thromboxane B2 production increased, but aorta 6-keto prostaglandin F1$\alpha$ decreased. When a higher amount of n-3 fatty acid was fed in each P/S ratio, the relative percentage of linolenic acid and EPA in platelet increased.

• 한국식품조리과학회지
• /
• 제7권4호
• /
• pp.71-86
• /
• 1991

This study was attempted to enhance nutritional value of cooked rice by adding milk in cooking water. Cooked and soaked rice with five different levels of milk in cooking water (0%, A: 30%, B: 50%, C: 70%, D: 100%, E) was tested for rheological parameters, fine structural changes, sensory evaluation. 1. Water absorbance of raw rice in cooking water with varying amountes of milk, was tested at $5^{\circ}C$ and $15^{\circ}C$ for 2 hours. Water absorption ratio was decreased as milk content was increased and soaking temperature was low. Time for maximum water absorption of sample A was 40 min at 1$15^{\circ}C$ but for sample B to D, it was not reached until 120 min. 2. Electronmicroscopic observation revealed that starch granules of rice lost their regular forms by soaking for 90 minutes, but recovered most of initial regularity after 24 hours. Increase in milk content of soaking water decreased marginal sharpness of the starch granule, presumably due to reduced swelling of the granule. 3. Degree of gelatinization of cooked rice was highest in sample A and progressively decreased as milk content was increased. It was, however, increased in all samples when the cooking water to rice ratio was raised from 160% to 180%. During 4 hour storage, rates of retrogradation were not different between A and B samples, but those of C, D and E were about 2.5 times higher than A and B under the optimal condition of 170% cooking water to rice ratio. This was in the order reverse to hardness order of AC>A, D＞E at cooking water to rice ratios of 160% and 170%, above which A sample surpassed the rest of samples. 4. Sensory evaluation conducted by fifteen university students as panelists showed that there were more significant differences among five samples in flavour, texture than appearance and a notable preference for b and C over A, D and E.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.400-405
• /
• 2015

PURPOSE. The purpose of this study is to mix dental ceramic powder in varying ratios and evaluate the effect of the mixing ratio on color and translucency. MATERIALS AND METHODS. The ceramic powder of shade A3 of the same product was mixed with the shade A2 of three products: IPS e.max Ceram (Ivoclar Vivadent, Schaan, Liechtenstein), Vintage Halo (SHOFU Inc., Kyoto, Japan), and Ceramco 3 (Ceramco-Dentsply, Burlington, NJ, USA) in the following fixed ratios (0 wt%, 25 wt%, 50 wt%, 75 wt%, and 100 wt%) and then fired. A total of 150 specimen of ceramic fired were manufactured in a regular size (W: 8.5 mm, L: 10.5 mm, and H: 1.5 mm). For color and translucency, $L^*$, $a^*$, and $b^*$ were measured and Two-way analysis of variance (ANOVA) and One-way analysis of variance (ANOVA) were used for data analysis (${\alpha}$=0.05). RESULTS. The higher the mixing ratio was, $L^*$, $a^*$, and $b^*$ of IPS e.max Ceram were all increased, and $L^*$ of Vintage Halo was reduced and $a^*$ and $b^*$ were increased. $L^*$ and $a^*$ of Ceramco3 were reduced and $b^*$ of Ceramco3 was increased. Color difference (${\Delta}E^*ab$) was increased in all three products as the mixing ratio got higher. Increased mixing ratios resulted in decreased translucency parameter (TP) values for IPS e.max Ceram but increased TP values for Vintage Halo and Ceramco3. CONCLUSION. In this limited study, CIE $L^*$, $a^*$, and $b^*$ were influenced by the mixing ratio of the A3 powders and porcelain powder mixtures represented a various color and translucency.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.78-86
• /
• 2002

In general, X-ray diffraction method detects the changes of crystal lattice under material surface using the angle of diffraction 2$\theta$. This technique which deals with in the presented paper can be applied to a behavior on the slipped band or the micro crack cause to material degradation. The relation between half-value breadth and cycle numbers shows three stages, which consist of rapid decrease in the initial cycle, slight decrease in the middle cycle, and then rapid decrease in the final cycle. The ratio of half-value breadth has a constant value on B/B$\_$0/ - N diagram under the loading condition except early part of fatigue life. The ratio of half-value breadth B/B$\_$0/ - log N$\_$f/ with respect to number of cycle to failure N$\_$f/ has linear behavior on B/B$\_$0/ - log N$\_$f/ diagram. Therefore, the evaluation of fatigue life by the average gradient has much less mean error than the estimation of fatigue life by log B/B$\_$0/ - log N/N$\_$f/ relation.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.145-152
• /
• 2000

X-ray diffraction method detects change of crystal lattice distance under material surface using diffraction angle 2$\theta$. This technique can be applied to the behavior on slip band and micro crack due to material degradation. The relation between half-value breadth and number of cycle has three stages which constitute rapid decrease in initial number of cycles, slight decrease in middle number of cycles and rapid decrease in final number of cycles. The ratio of half-value breadth takes a constant value on B/B$_{0}$-N diagram with loading condition except early part of fatigue life. The ratio of half-value breadth B/B$_{0}$ with respect to number of cycle to failure N$_{f}$ has linear behavior on B/B$_{0}$-log N$_{f}$ diagram. Therefore, in this paper the estimation of fatigue life by average gradient method has much less estimated mean error than the estimation of fatigue life by log B/B$_{0}$-log N/N$_{f}$ relation.elation.ation.