• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.372-380
• /
• 2019

Objective: To determine the effects of a local injection of leukocyte-platelet-rich plasma (L-PRP) on orthodontic tooth movement in rabbits. Methods: Twenty-three male New Zealand white rabbits were included in a split-mouth design. Tooth movement with a 100-g nickel-titanium closed-coil spring was performed on the maxillary first premolars. L-PRP was injected submucosally at the buccal and lingual areas of the first premolar in one random side of the maxilla and the other side served as the control and received normal saline. The amount of tooth movement was assessed on three-dimensional digital models on days 0, 3, 7, 14, 21, and 28. Histological findings and osteoclast numbers were examined on day 0 as the baseline and on days 7, 14, and 28. Results: The L-PRP group showed significantly greater cumulative tooth movement at all observed periods. However, a significantly higher rate of tooth movement was observed only on days 0-7 and 7-14. The osteoclast numbers were significantly increased in the L-PRP group on days 7 and 14. Conclusions: Local injection of L-PRP resulted in a transient increase in the rate of tooth movement and higher osteoclast numbers.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.672-679
• /
• 2013

Creativity is the thinking ability and the expression of new image by imagination as a problem recognition and way of solution. This study aims to search for the creativity theory of body movement and to analyze the creativity factor. According to the study, the creativity of body movement needs four steps: movement awareness, movement design, movement discovery and movement use. The use of new image through self-perception and self concept brings about a creative improvement in the problem recognition and its resolution function. In conclusion, the creativity of body movement means the infinity of body movement as 'the third energy' and 'the flexibility of flow' by interaction.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.2
• /
• pp.335-345
• /
• 2021

The purpose of this study was to examine the effect of fabric movement on wrinkle recovery in a clothing care system and to propose an algorithm to improve wrinkle removal performance by adjusting fabric movements. With an increase in the reciprocating speed of the movement system, the number and amplitude of curves on the fabric also increased. This allowed the fabric to be applied to a larger tension, resulting in better wrinkle removal performance at higher speeds. However, even at high reciprocating speeds, wrinkles could not be removed effectively because of nodes at a few specific locations. Based on the results of fabric movement and wrinkle recovery, a complex movement algorithm was proposed with a mixture of various reciprocation speeds. It showed a 41%p (24%→65%) improvement of wrinkle recovery when compared with the conventional algorithm that showed simple fabric movement at 180 rpm. This was because the positions of nodes and antinodes changed continuously and the force by the reciprocating motion could be applied evenly to the fabric.

• Journal of The Korean Association For Science Education
• /
• v.2 no.1
• /
• pp.31-51
• /
• 1980

In order to research into the devel of the concept of movement and speed in our own way and compare with the Piaget's method, and then find out the formative period of such development, we have put the 192 primary school children as the model and obtained the following results. 1. As their grade upyards, all the experimental subjects showed the gradual progress generally regardless of sex or regions, while only the relative speed showed irregular progress. 2. There was no experimental subject which showed any remarkable sexual characteristics. But in the relative movement, the lower grade boys and higher grade girls made progress. In the subjects of circulation movement, intuition of speed, relative speed and speed of simultaneous movement, the boys marked better progress, whilst the girls were advanced a little in the speed of continuous movement with, different distance and time. 3. There was no conspicuous difference between the urban and rural areas, except a slight tendency that the urban children made better progress in the change of progressing direction, native continuous procedure of periodical movement, travelling road, and the speed of continuous movement with different distance and time whereas the rural children were more advanced in the relative movement, relative speed and intuition of speed. But it should be 'taken into consideration that the rural regions in our case were relatively developed in comparison with the traditional rural communities, which may explain about little regional difference. 4. Comparing our research results with the Piaget's theory, we have reached below results. Our research reports that the formative period of the conception of the problems of diverse progressing direction and a native continuous procedure of periodical movement was simultaneous, at the Piagetian level(at the fourth grade) which coincides with Piagetian theory. The travelling road should be made up a little lower at 2A/2B according' to Piagetian Level, whereas it was formed at the 4th grade as shown in our previous research. Intuition of speed should belong to the prior stage to concrete operation, but our research shows it was formed late at the 4th grade. Composition of displacement was made at the 6th grade, and it was almost equal to the first stage of formal operation(3A). But in the subjects of relative movement relative speed, the speed of continuous movement with different distance and time, relation and preservation of invariable speed, and accelerated motion, even 6th grade children marked a poor record. Summed up, the procedure conception as a basic movement conception coincides with the Piagetion level. But as for speed intuition, relative speed and speed fixation, it was Jar behind Piagetian level. Therefore it is required that we have to concentrate on the systematic training in these parts on the spot.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.99-103
• /
• 2015

Quake wavelength technique was designed of the sway by the body. There was presented a concept of the dangle wavelength by twisting condition of posture. We compared to the twisting condition for an average variation and maximum variation with the movement. There was used a combination system and correlation system of the posture. Their correlation signal was presented a control data by the dynamic movement. The quake wavelength system was to be formation of activity aspects by posture. The correlation of wavelength technique was applied to the a little action of posture variation signal. Quake wavelength by the dynamic movement was determined to a variation of vision condition of the $Vi-{\alpha}_{AVG}$ with $(-1.27){\pm}(-0.34)$ units, that vestibular condition of the $Ve-{\alpha}_{AVG}$ with $(-0.49){\pm}(-0.4)$ units, that somatosensory condition of the $So-{\alpha}_{AVG}$ with $0.037{\pm}0.269$ units, that CNS condition of the $C-{\alpha}_{AVG}$ with $(-0.049){\pm}0.015$ units. As the study of the quake wavelength technique was depended on the action system of body movement that a maximum and averag values was used a movement of combination data. The system was required an action signal for the form of actual signal on the basis of a little movement condition in the body. The human action systemwas compared to maximum and average from the movement derived the body. Therefore, their system was controlled to evaluate posture condition for the body correlation.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.337-349
• /
• 2009

In this paper, we introduce a novel mobility model for mobile sinks in which the sinks move towards randomly distributed destinations, where each destination is associated with a mission. The novel mobility model is termed the random mobility with destinations. There have been many studies on mobile sinks; however, they merely support two extreme cases of sink mobility. The first case features the most common and general mobility, with the sinks moving randomly, unpredictably, and inartificially. The other case takes into account mobility only along predefined or determined paths such that the sinks can gather data from sensor nodes with minimum overhead. Unfortunately, these studies for the common mobility and predefined path mobility might not suit for supporting the random mobility with destinations. In order to support random mobility with destination, we propose a new protocol, in which the source nodes send their data to the next movement path of a mobile sink. To implement the proposed protocol, we first present a mechanism for predicting the next movement path of a mobile sink based on its previous movement path. With the information about predicted movement path included in a query packet, we further present a mechanism that source nodes send energy-efficiently their data along the next movement path before arriving of the mobile sink. Last, we present mechanisms for compensating the difference between the predicted movement path and the real movement path and for relaying the delayed data after arriving of the mobile sink on the next movement path, respectively. Simulation results show that the proposed protocol achieves better performance than the existing protocols.

• Journal of the Korean Home Economics Association
• /
• v.38 no.11
• /
• pp.89-104
• /
• 2000

The purpose of this study is to grope the direction of the environmental movement for the improvement of welfare. The deterioration of environment which was resulted from the development of material civilization due to the industrialization made people newly recognize the importance of environment. The quality of the future life depends on the solution of the environmental problems. The family-centered environmental movement as a new cultural movement in the daily life should be revitalized for the purpose of improving welfare. This study investigated the several views on the environmental problems in the neighboring disciplines of home economics. And on the basis of the results of the study, the direction of environmental movement to be developed in home economics was represented. This study represented the directions of the environmental movement as a new cultural movement in the daily life as follows: alternative life-style, that is, pro-environmental life-style-oriented direction; community-oriented direction such as cooperative association movement in daily life; the politicalization of the environmental problems, that is, the endeavor to reflect the election promise on the environment in the vote, etc. The content of the environmental movement shoed be treated of in environmental education, consumer education, family-life education, school education, and life-long education.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.253-262
• /
• 2006

There are some differences between the movements that are produced with closed system and opened system. When an object is moved by the force occurred inside the object, It is called closed movement on the other hand,when the object is moved by the external force. the system is called opened movement. The closed movement model is consist of a linear closed movement system and a nonlinear closed movement system. The approximate equations of the approximate model are derived from the principles and experimental devices of the linear closed movement systems. Various nonlinear closed movement modes and experimental devices are also compared. The results show that linear closed movement model can be derived from nonlinear system due to the couple of nonlinear closed movement model.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.399-405
• /
• 2003

Tooth movement facilitated by corticotomy and distraction osteogenesis, new paradigm in orthodontics, was discussed. Intrusive tooth movement of anterior or posterior teeth was thought to be difficult or impossible. In this study, a part of cortical bone, which was a sort of resistance to tooth movement in alveolar bone, was removed. On the other hand, active bone deposition was made possible in the tension side. That was the main concept of tooth movement facilitated by corticotomy and distraction osteogenesis. Teeth moved at such a speedy tate as we could not imagine in conventional tooth movement, which lead to the reduction of total treatment Period. And intrusive movement was Possible without a side effect, lot example, root resorption or the periodontal breakdown. Those were the superior aspects to the conventional orthodontics.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.187-196
• /
• 2007

The purpose of this study was to find the most effective movement pattern from three different types of preparatory movement(squat, countermovement and hopping) in sideward responsive propulsion task, which had the time constraint to complete the performance. 7 healthy subjects participated in left and right side movement task by an external signal, which required the subject to perform the task as fast as possible. Mechanical output and joint kinetics focusing on the lower extremities were analyzed. The results were as follows. In spite of the shortest duration in propulsive phase, the hopping condition showed no difference with other conditions in the work output done and take-off velocity. It resulted from the greatest power output generated during the propulsive phase. A significant difference was found for joint moment and joint power according to the movement conditions. The joint moment and joint power for the countermovement and hopping conditions were larger than those in the squat condition. This was speculated to be due to the extra power that could be generated by the pre-stretch of muscle in preparation for the propulsion. The hopping condition which had substantially more pre-stretch load in the preparatory eccentric phase produced considerably more power than countermovement condition in the propulsive concentric phase. Furthermore during the hopping a large amount of joint moment and joint power could be produced in a shorter time. Therefore it was deemed that the hopping movement is an effective type of preparatory movement which takes much more advantage of the pre-stretch than any other movement.