• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.1
• /
• pp.65-73
• /
• 2014

Objectives: The purposes of this study are to investigate workers' exposures to respirable particles generated in taconite mines and to compare two metric methods for mass concentrations using direct-reading instruments. Methods: Air monitorings were conducted at six mines where subjects have been exposed primarily to particulate matters in crushing, concentrating, and pelletizing processes. Air samples were collected during 4 hours of the entire work shift for similarly exposure groups(SEGs) of nine jobs(N=37). Following instruments were employed to evaluate the workplace: a nanoparticle aerosol monitor(particle size range; 10-1000 nm, unit: ${\mu}m^2/cc$, Model 9000, TSI Inc.); DustTrak air monitors($PM_{10}$, $PM_{2.5}$, unit: $mg/m^3$, Model 8520, TSI Inc.); a condensation particle counter(size range; 20-1000 nm, unit: #/cc, P-Trak 8525, TSI Inc.); and an optical particle counter(particle number by size range $0.3-25{\mu}m$, unit: #/cc, Aerotrak 9306, TSI Inc.). Results: The highest airborne concentration among SEGs was for furnace operator followed by pelletizing maintenance workers in number of particle and surface area, but not in mass concentrations. The geometric means of $PM_{2.5}$ by the DustTrak and the Ptrak/Aerotrak were $0.04{\mu}m$(GSD 2.52) and $0.07{\mu}m$(GSD 2.60), respectively. Also, the geometric means of RPM by the DustTrak and the Ptrak/Aerotrak were $0.16{\mu}m$(GSD 2.24) and $0.32{\mu}m$(GSD 3.24), respectively. The Pearson correlation coefficient for DustTrak $PM_{2.5}$ and Ptrak/Aerotrak $PM_{2.5}$ was 0.56, and that of DustTrak RPM and Ptrak/Aerotrak RPM was 0.65, indicating a moderate positive association between the two sampling methods. Surface area and number concentration were highly correlated($R^2$ = 0.80), while $PM_{2.5}$ and RPM were also statistically correlated each other($R^2$ = 0.79). Conclusions: The results suggest that it is possible to measure airborne particulates by mass concentrations or particle number concentrations using real-time instruments instead of using the DustTrak Aerosol monitor that monitor mass concentrations only.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.188-195
• /
• 1987

This study was conducted to investigate whether seedling growth be affected by immature kernels from different stages after flowering in rye, triticale, wheat and oats cultivars, for two years in Suwon. Kernels reached a near-maximum test weight at 35 days after flowering in Paldanghomil and Dooroohomil (Rye), and 30 days in Sinkihomil (Triticale), Geurumil (Wheat), and Megwiri (Oats). Test weight of immature kernels from different days after flowering were not significantly correlated with germination percentage, but highly positively correlated with their seedling height, fresh and dry weight. However, seedling height is not different among seedlings from kernels harvested at 20, 25 and 30 days (maturing time) after flowering of Sinkihomil and Megwiri, and between 25 and 30 days (maturing time) of Geurumil. Also between seedlings from 25 day and 30 day-kernel after flowering are little difference of fresh and dry weight of Sinkihomil and Megwiri. In Suwon, located at the middle part of Korea, it was suggested that Paldanghomi1 and Dooroohomil could be harvested at 35 days (June 19, and June 24, respectively) after flowering, and Sinkihomil, Geurumil, and Megwiri, at 25days (June 24, June 14 and July 4, respectively) after flowering for seed of for2:ge production.

• Imaging Science in Dentistry
• /
• v.38 no.3
• /
• pp.169-176
• /
• 2008

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-$9000^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by $X^2$-test. Results : 1. There was no statistical significance according to 3 types (type I, type II, type III) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.205-205
• /
• 2013

테라헤르쯔(terahertz: THz)파는 0.1~10 THz 의 범위로 적외선과 방송파 사이에 광대역 주파수 스펙트럼을 차지하고 있으며 직진성, 투과성, 그리고 낮은 에너지 (meV)를 가지고 있어 비 파괴적이고 무해한 장점을 지니고 있다. Ti:sapphire laser와 같은 femto-pulse source 등이 많은 발전이 되어 현재 많은 연구와 발전이 이루어지고 있다. femto-pulse source를 이용한 THz 응용에서는 높은 저항, 큰 전자 이동도, 그리고 아주 짧은 전하수명의 기판을 요구하는데 저온에서 성장한 (low-temperature grown : LT) GaAs는 격자 내에 Gallium 자리에 Arsenic이 치환 하면서 AsGa antisite가 발생하여 전하수명을 짧아지는 것을 응용하여 가장 많이 이용되고 있다. 현재 THz 응용분야에서 보다 작고 가격경쟁력이 있는 광통신을 이용한 THz photomixer등이 활발히 연구 하고 있다. 광섬유 내에서 손실과 분산이 최소값을 가지는 부분이 1.55 ${\mu}m$ 부근이고 In0.53Ga0.47As 기판을 이용하였을 때 여기에 완벽하게 만족하게 된다. 하지만 LT-InGaAs 의 경우 AsGa antisite로 인하여 carrier lifetime은 짧아지지만 높은 n-type 전하밀도를 가지게 된다. 이때 Be을 doping하여 전하밀도를 보상하여 높은 저항을 유지해야 하는데 Be의 활성화를 위해서는 열처리를 필요로 한다. 하지만 열처리를 하면 carrier lifetime이 길어지기 때문에 carrier lifetime과 저항을 적절히 조율해야 한다. 이는 물질자체의 특성이기 때문에 InGaAs는 GaAs보다 낮은 amplitude와 짧은 cut-off frequency를 가진다. 본 연구에서는 보다 높은 저항을 얻기 위하여 molecular beam epitaxy를 이용하여 semi-insulating InP:Fe 기판위에 격자 정합된 InGaAs:Be/InAlAs multi quantum well (MQW)를 온도별 ($250{\sim}400^{\circ}C$), 주기별 (50~150)로 성장을 하였고 이때 InGaAs layer의 Be doping level은 $2{\times}1018\;cm^{-3}$, Ex-situ annealing은 $550^{\circ}C$에서 10분으로 고정 하였다. THz 발생 실험에서는 InGaAs/InAlAs MQW은 4000 pA로 1,000 pA를 가지는 InGaAs epilayer보다 4배 높은 전류 신호를 얻을 수 있었고 모든 샘플이 2 THz에서 cut-off frequency를 가지고 있었다. THz 검출 실험에서는 LT-InGaAs:Be epilayer LT-InGaAs:Be/InAlAs, HT-InGaAs/InAlAs 샘플이 각각 180, 9000, 12000 pA의 전류신호를 가지고 있었고 모든 샘플이 2 THz에서 cut-off frequency를 가지고 있었다. HT-InGaAs/InAlAs MQW를 이용한 검출실험에서는 InGaAs layer가 defect free이지만 LT-InGaAs:Be/ InAlAs MQW 보다 높은 전류 신호를 얻을 수 있었다. 이는 InAlAs layer가 저항만 높이는 것뿐만 아니라 carrier trapping layer로써의 역할도 하는 것으로 사료된다.

• Journal of Nutrition and Health
• /
• v.18 no.4
• /
• pp.301-311
• /
• 1985

Even though the anticarcinogenic effect of dietary factors especially beta - carotene has been reported by various investigators, the mechanism of the action of ${\beta}-carotene$ has not yet been identified. We carried out the present study to determine the possibilities of relative cancer risk related to dietary intake of vitamin A ( both ${\beta}-carotene$ and retinol ) and blood levels of vitamin A among Koreans. The subjects were divided into two groups; cancer patients and controls. Blood levels for ${\beta}-carotene$ and retinol were analyzed by alumina column chromatography and colorimetry. Dietary intake was examined by food profile and convenient method for evaluating nutritional status through recalling 10 years of food habits. The results obtained are as follows : 1 ) Calorie, protein, fat, and carbohydrate intakes of cancer patient were lower than those of control. Calorie and carbohydrate intakes showed no significant difference but protein and fat intakes were significantly lower in cancer patients. According to cancer sites, in stomach cancer only fat intake was significantly lower than that of control. In lung and larynx cancer calorie, protein, fat and carbohydrate intakes showed similar trend as in control. 2 ) Vitamin A intake of cancer patient was significantly lower than that of control. It was estimated that 83.6% of total Vitamin A intake were provided by ${\beta}-carotene$ for control and cancer patient respectively. 3 ) The mean intake of dietary ${\beta}-carotene$ in cancer patient was significantly lower than that in control ( $7002\;\mu}g/day$ versus $10326\;{\mu}g/day$ ) According to cancer sites in mean intake of dietary ${\beta}-carotene$ was significantly lower in all but stomach cancer compared with that of control. Lung and larynx cancer showed lowest ${\beta}-carotene$ intake with mean value of $5855{\mu}g/day$ and $5492{\mu}g/day$ respectively. 4 ) The mean intake of dietary retinol in cancer patient was significantly lower than that in control ( $245{\mu}g/day$ versus $338{\mu}g/day$ ), but the difference was not significant. 5 ) The relative risk of all cancers in the first (lowest) to the forth quartile level of ${\beta}-carotene$ consumption such as $0-5999{\mu}g/day$. $6000-8999{\mu}g/day$, $9000-11999{\mu}g/day$/ day and $12000-20000{\mu}g/day$ was 85 : 1.7 : 20 : 1.0. The relative risk of all cancers in the first (lowest) to the forth quartile level of retinol consumption, such as $0-299{\mu}g/day$, $300-599{\mu}g/day$, 600-899${\mu}g/day$, and $900-1200{\mu}g/day$, was 1.14 : 067 : 0.21 : 1.0. 6 ) The various food group consumption of cancer patient were significantly lower than those of control in green leafy vegetables, fruits, sea weeds, milk and cheese and eggs. But the Kimchie consumption in cancer patient was three fold higher than that of control ( $1840\;{\mu}g/day$ versus $562\;{\mu}g/day$ ) and in the stomach cancer, Kimchie consumption was the highest, ( $1890\;{\mu}g/day$) According to cancer sites, the consumption of green leafy vegetables was significantly lower in all but stomach cancer compared to control and other vegetables showed no difference between two. In lung and larynx cancer, green leafy vegetables consumption was lowest ( $6094{\mu}g/day$ $5921{\mu}g/day$) and milk and cheese consumption was also( $5\;{\mu}g/day$ and $11{\mu}g/day$) 7 ) The recovery of ${\beta}-carotene$ from human serum by alumina column chromatography was $94.4{\pm}2.3%$. 8 ) Cancer patients showed significantly lower serum retinol ($56.4{\pm}18.1\:{\mu}g/100ml$ versus $72.2{\pm}21.8\:{\mu}g/100ml$) and ${\beta}-carotene$ ($48.9{\pm}33.8\:{\mu}g/100ml$ versus $72.2{\pm}42.6\:{\mu}g/100ml$) concentrations than in controls. 9 ) But breast cancer patients were not significantly different from controls in their serum retinol and ${\beta}-carotene$ concentrations.

• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.63-72
• /
• 2008

With recent advancement of the medical imaging systems and picture archiving and communication system (PACS), installation of digital radiography has been accelerated over past few years. Moreover, Computed Radiography (CR) which was well established for the foundation of digital x-ray imaging systems at low cost was widely used for clinical applications. This study analyzes imaging characteristics for two systems with different pixel sizes through the Modulation Transfer Function (MTF), Noise Power Spectrum (NPS) and Detective Quantum Efficiency (DQE). In addition, influence of radiation dose to the imaging characteristics was also measured by quantitative assessment. A standard beam quality RQA5 based on an international electro-technical commission (IEC) standard was used to perform the x-ray imaging studies. For the results, the spatial resolution based on MTF at 10% for Agfa CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.9 cycles/mm and 2.8 cycles/mm, respectively. The spatial resolution based on MTF at 10% for Fuji CR system with I.P size of $8{\times}10$ inches and $14{\times}17$ inches was measured as 3.4 cycles/mm and 3.2 cycles/mm, respectively. There was difference in the spatial resolution for $14{\times}17$ inches, although radiation dose does not effect to the MTF. The NPS of the Agfa CR system shows similar results for different pixel size between $100{\mu}m$ for $8{\times}10$ inch I.P and $150{\mu}m$ for $14{\times}17$ inch I.P. For both systems, the results show better NPS for increased radiation dose due to increasing number of photons. DQE of the Agfa CR system for $8{\times}10$ inch I.P and $14{\times}17$ inch I.P resulted in 11% and 8.8% at 1.5 cycles/mm, respectively. Both systems show that the higher level of radiation dose would lead to the worse DQE efficiency. Measuring DQE for multiple factors of imaging characteristics plays very important role in determining efficiency of equipment and reducing radiation dose for the patients. In conclusion, the results of this study could be used as a baseline to optimize imaging systems and their imaging characteristics by measuring MTF, NPS, and DQE for different level of radiation dose.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.160-167
• /
• 2015

Radiation exposure from medical diagnostic imaging procedures to patients is one of the most significant interests in diagnostic x-ray system. A miniature x-ray intraoral tube was developed for the first time in the world which can be inserted into the mouth for imaging. Dose evaluation should be carried out in order to utilize such an imaging device for clinical use. In this study, dose evaluation of the new x-ray unit was performed by 1) using a custom made in vivo Pig phantom, 2) determining exposure condition for the clinical use, and 3) measuring patient dose of the new system. On the basis of DRLs (Diagnostic Reference Level) recommended by KDFA (Korea Food & Drug Administration), the ESD (Entrance Skin Dose) and DAP (Dose Area Product) measurements for the new x-ray imaging device were designed and measured. The maximum voltage and current of the x-ray tubes used in this study were 55 kVp, and 300 mA. The active area of the detector was $72{\times}72mm$ with pixel size of $48{\mu}m$. To obtain the operating condition of the new system, pig jaw phantom images showing major tooth-associated tissues, such as clown, pulp cavity were acquired at 1 frame/sec. Changing the beam currents 20 to $80{\mu}A$, x-ray images of 50 frames were obtained for one beam current with optimum x-ray exposure setting. Pig jaw phantom images were acquired from two commercial x-ray imaging units and compared to the new x-ray device: CS 2100, Carestream Dental LLC and EXARO, HIOSSEN, Inc. Their exposure conditions were 60 kV, 7 mA, and 60 kV, 2 mA, respectively. Comparing the new x-ray device and conventional x-ray imaging units, images of the new x-ray device around teeth and their neighboring tissues turn out to be better in spite of its small x-ray field size. ESD of the new x-ray device was measured 1.369 mGy on the beam condition for the best image quality, 0.051 mAs, which is much less than DRLs recommended by IAEA (International Atomic Energy Agency) and KDFA, both. Its dose distribution in the x-ray field size was observed to be uniform with standard deviation of 5~10 %. DAP of the new x-ray device was $82.4mGy*cm^2$ less than DRL established by KDFA even though its x-ray field size was small. This study shows that the new x-ray imaging device offers better in image quality and lower radiation dose compared to the conventional intraoral units. In additions, methods and know-how for studies in x-ray features could be accumulated from this work.