• Journal of Korean Library and Information Science Society
• /
• v.10
• /
• pp.157-191
• /
• 1983

The purpose of the study is to build a general cost a counting model for university libraries, to clarify the possible areas of its a n.0, pplication by employing job cost accounting and process cost accounting methods. System analysis is performed as to the fields of acquisition, processing (cataloging & classification), and book shelving system. The existing operation processes and time required for each operation of these three systems are analyzed, from which detailed system flowcharts were drawn and job descriptions and the content of job were identified. The results of the study can be summarized as follows: (1) The processing time of one book in each systems: Oriental books. a. Acquisition system. the time required the time required in case of job cost case of job cost accounting after purchasing, 8 min. 21 sec. the time required in case of process cost accounting 15 min. 7 sec. b. Processing system. the time required for non-duplicate, 34 min. 40 sec. the time required for duplicate, 8 min. 49 sec. the time required for purchasing of more than the time required two copies at a time. 4 min. 44 sec. c. Book shelving system. the time required. 1 min. 43 sec. Western books. a. Acquisition system the required in case of job cost accounting, 9 min. 1 sec. the time required in case of process cost accounting. 15 min. 7 sec. b. Processing system. the time required for non-duplicate, 32 min. 58 sec. the time required for duplicate, 9 min. 26 sec. the time required for purchasing of more than two copies at a time. 5 min. 33 sec. c. Book shelving system. the time required. 1 min. 43 sec. (2) Total sum of processing time and processing cost per book. Oriental books (including material cost) the time required. cost. a. non-duplicate, 51 min. 30 sec. 2, 791 won b. duplicate, 25 min. 39 sec. 1, 580 won c. purchasing of more than two copies as a time, 21 min. 34 sec. 1, 368 won Western books(including material cost) a. non-duplicate, 49 min. 48 sec. 3, 189 won b. duplicate, 26 min. 16 sec. 1, 846 won c. purchasing of more than two copies at a time. 22 min. 23 sec. 1, 388 won

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.98-105
• /
• 2007

The objectives of this study were to demonstrate that enhanced anaerobic digestion could be achieved by adopting ultrasonic cavitation pretreatment on the basis of the biogas production and to compare the simulation results of ADM1 (Anaerobic Digestion Model No. 1) with results of the experimentally operated digester the ultrasonic pretreatment of sewage sludge showed the hindered effect on the dewaterbility and the increase of SCOD production. In this study, four sets of lab-scale anaerobic digester were operated with untreated(control), 30 min, 60 min and 90 min ultrasonic pretreated sludge. TCOD removal efficiencies in digesters of control, 30, 60, 90 min sonicated sludge were 31.9%, 37.9, 38.5% and42.2%, and 75 removal were 15.9%, 20.8%, 21.5%, 24.1% respectively. Also more biogas was produced gradually with the increased sludge loading and the pretreatment time. Overall the simulation results had a correspondence tendency with the experimental efficiencies.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.68-75
• /
• 2000

In this study, polyester DTY faille(yoryu) and N/NP microfiber fabrics were pretreated (desizing, scouring and shrinking) by Continuous Scouring and Shringking Equipment with rota-drum and conveyor type in which types were different with retaining method. The results were as follows. The shrinkage ratio of wp/wf direction of DTY fabrics scoured by conveyor type was 1.5/23% higher than those by rota-drum type at $97^\circ{C}$ with 10min. treatment. In this case, The shrinkage ratio of wp/wf direction by those types was about 15/27%, respectively. The shrinkage ratio of wp/wf direction of N/NP microfiber fabrics scoured by conveyor type was 1.5/23% higher than that by rota-drum type at $97^\circ{C}$ with 10min. treatment. The size add-on of DTY fabrics scoured at $97^\circ{C}$ with 10min. treatment by conveyor type and by rota-drum type were 0.15% and 0.42%, respectively. The size add-on of DTY fabric treated by rota-drum type decreased until 9min. of treated time, but increased after 9min. The size add-on of N/NP microfiber fabrics treated by conveyor type was decreased by increasing temperature and treated time, while the size add-on of that treated by rota-drum type was decreased until 6min. treated time and increased after 6min. The size add-on of N/NP microfiber fabrics treated by conveyor type at $97^\circ{C}$ for 10min. was 0.3% lower than that by rota-drum type.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.11-16
• /
• 1999

In this study, Ultra-precision finishing system using micro abrasive film experimented using experimental variable film feed speed and grinding speed and structural steel(SM45C) with respect to 12~3{\mu}m$ micro abrasive film. the result are follows; (1) Experimental condition must setup dissimilar about each micro abrasive film. (2) To measurement deviation the smallest machined condition are 20mm/min in 12{\mu}m$, 5mm/min and 15mm/min in 9{\mu}m$ and 5{\mu}m$, 5mm/min in 3{\mu}m$ in film feed speed. (3) To measurement deviation the smallest machined condition are 180m/min in 12{\mu}m$, 84m/min in 9{\mu}m$, 56 and 84m/min in 5{\mu}m$, 104m/min in 3{\mu}m$ in grinding speed.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.949-954
• /
• 2006

The purpose of this paper is to develop water jet plasma reactor and investigate the optimal condition of the syngas production by reforming of hydrocarbon fuel. Fuel used was propane and plasma was generated by arc discharge on water jet surface. Discharge slipping over the water surface has a number of advantages such as a source of short-wave and UV radiation, and it can be used for biological and chemical purification of water. Parametric screening studies were conducted, in which there were the variations of power ($0.18{\sim}0.74$ kW), water jet flow rate($38.4{\sim}65.6$ mL/min), electrode gap($5{\sim}15$ mm) and treatment time($2{\sim}20$ min). When the variations were 0.4 kW, 53.9 mL/min, 10 mm and 20 min respectively, result of maximum $H_2$ concentration was 61.6%, intermediates concentration were 6.1% and propane conversion rate was 99.8%.

• Analytical Science and Technology
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2016

It is believed that traditional Korean medicines can be managed more scientifically through the development of logical criteria to verify their region of cultivation, and that this could contribute to the advancement of the traditional herbal medicine industry. This study attempted to determine such criteria for Sansuyu. The volatile compounds were obtained from 20 samples of domestic Corni fructus (Sansuyu) and 45 samples of Chinese Sansuyu by steam distillation. The metabolites were identified in the NIST Mass Spectral Library via the obtained gas chromatography/mass spectrometer (GC/MS) data of 53 training samples. Data binning at 0.2 min intervals was performed to normalize the number of variables used in the statistical analysis. Multivariate statistical analyses, such as principle component analysis (PCA), partial least squares-discriminant analysis (PLS-DA), and orthogonal partial least squares-discriminant analysis (OPLS-DA) were performed using the SIMCA-P software package. Significant variables with a variable importance in the projection (VIP) score higher than 1.0 were obtained from OPLS-DA, and variables that resulted in a p-value of less than 0.05 through one-way ANOVA were selected to verify the marker compounds. Finally, among the 11 variables extracted, 1-ethylbutyl-hydroperoxide (9.089 min), nonadecane (20.170 min), butylated hydroxytoluene (25.319 min), 5β,7βH,10α-eudesm-11-en-1α-ol (25.921 min), 7,9-bis(2-methyl-2-propanyl)-1-oxaspiro[4.5]deca-6,9-diene-2,8-dione (34.257 min), and 2-decyldodecyl-benzene (54.717 min) were selected as markers to indicate the origin of Sansuyu. The statistical model developed was suitable for the determination of the geographical origin of Sansuyu. The cultivation areas of four Korean and eight Chinese Sansuyu samples were predicted via the established OPLS-DA model, and it was confirmed that 11 of the 12 samples were accurately classified.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.11-20
• /
• 1968

Maximal oxygen uptake was measured in thirty-three secondary school girls by means of the treadmill test. Eighteen middle school girls aged 14.0 (range: $13.0{\sim}15.9$) years and fifteen high school girls aged 16.9 (range: $16.0{\sim}18.0$) years served as subjects. Maximal treadmill run lasted for 2 minutes and 20 seconds and the expired air was collected in a Douglas bag through a J-valve during the last one minute period. In general, absolute values of various measurements in the high school girls were greater than those of the middle school girls. When values were expressed on the body weight or lean body weight basis, however, work capacity of middle school girls was superior to that of the high school girls. The detailed results are as follows: 1. In middle school girls maximal oxygen uptake was 1.78 l/min., 47.4 ml/kg body weight, 12.3 ml/cm body height, and 61.7ml/kg lean body mass. In high school girls maximal oxygen uptake was 1.93 l/min., 39.7ml/kg body weight, 12.3 ml/cm body height, and 51.2 ml/kg LBM. Although the absolute value of maximal oxygen uptake was greater in high school girls than in middle school girls, values expressed on the body weight basis showed the reverse trend, namely, values of the middle school girls was greater than those of the high school girls. 2. The ratio of maximal to resting oxygen uptake was 8.8 in the middle school girls and was 10.2 in the high school girls. 3. Maximal pulmonary ventilation in the middle school girls was 55.3 l/min. and 66.1 l/min. in the high school girls. The ratio of maximal to resting pulmonary ventilation was 10.2 in the middle school girls and 10.1 in the high school girls. 4. The correlation between body weight and maximal oxygen uptake was relatively high, namely, r=0.79 both in middle and high school girls. The correlation coefficient between body weight and maximal pulmonary ventilation was a little less that of between maximal oxygen uptake and showed a value of r=0.60 both in middle and high school girls. The lean body mass was a poor reference of maximal oxygen uptake or maximal pulmonary ventilation as compared to body weight. The correlation between maximal oxygen uptake and maximal pulmonary ventilation was high and the coefficient of correlation in middle school girls was 0.927 and in high school girls it was 0.856. 5. Maximal ventilation equivalent was 30.9 liters in middle school girls and 33.9 liters in high school girls. This indicated that no hyperventilation was induced during the maximal of oxygen uptake exercise period as related to the maximal oxygen uptake. 6. Heart rate reached to the peak value within 1.5 minutes after beginning of maximal oxygen uptake run and remained at the same peak plateau level throughout the entire running period. Heart rate decreased steeply on cessation of running and subsided slowly thereafter. The maximal heart rate was 184 beat/min. in middle school girls and 189 beat/min. in high school girls. 7. Maximal oxygen pulse was 9.4 in middle school girls and 9.9 ml/beat in high school girls.

• Exercise Science
• /
• v.21 no.2
• /
• pp.231-242
• /
• 2012

The purpose of this study was to develop the prediction model of VO₂max using submaximal metabolic responses from the Bruce protocol, HR responses at several stages and 1,200 m running record, and to compare and analyse the validity of these prediction models. The subjects were consisted of 255 male(133 male for 1,200 m running). They were participated maximal exercise testing with Bruce protocol, and the metabolic responses were measured in the end of the first(3 minute), second stage(6 minute), and 1,200 m running record. Measurement items were VO₂(㎖/kg/min), VCO₂(㎖/kg/min), VE(L/min), HR(bpm) of 3 and 6 minute, time to HR 150 bpm and 170 bpm, HR difference between Bruce protocol 6 and 3 minute, 1,200 m running record. Analyzing with all variables using enter method, the multiple R of total variable model was 0.642(p<.01), SEE was 4.38 ㎖/kg/min, CV was 10.8 %, but multicolinearity was appeared. The multiple R of 3 minutes model 1 and model 2 were 0.341 and 0.461, SEE was 6.05 and 5.72 ㎖/kg/min, CV was 14.9 and 14.1%, and multicolinearity did not appeared. The multiple R of 6 minutes model 1 and model 2 were 0.350 and 0.456, SEE was 6.03 and 5.74 ㎖/kg/min, CV was 14.9 and 14.2%, and multicolinearity did not appeared. The R of HR 170 and HR 170 model were 0.151 and 0.154, SEE were 6.36~6.37 ㎖/kg/min, CV were 15.7%. The R of 1,200 m running model was 0.444, SEE was 4.82 ㎖/kg/min, CV were 11.9%. In conclusion, with considering usefulness and convenience through the validity of these prediction models, the prediction model of VO₂max recommended 6 and 3 minute model, and the validity of HR model and 1,200 m running model were moderately low.

• Magazine of RCR
• /
• v.9 no.2
• /
• pp.33-37
• /
• 2014

• 건강소식
• /
• v.36 no.9
• /
• pp.6-9
• /
• 2012