• Journal of Radiation Protection and Research
• /
• 제21권4호
• /
• pp.273-284
• /
• 1996

착상전기(着床前期}의 태아(胎兒)는 방사선(放射線)을 비롯한 많은 환경요인(環境要因)에 대하여 감수성(感受性)이 높은 개체(個體)임에도 불구하고 특히 이 시기는 임신부(姙娠婦)가 자각(自覺)적으로 임신을 감지할 수 없는 시기이기에 이러한 여러 환경유해요인으로부터 의도적으로 피할 수가 없다. 그러므로 착상전기의 영향을 충분히 검토한 후에 의료행위를 취할 것이며 이에 대한 방어(防禦)대책도 검토할 필요가 있다. 종래 까지 방사선에 대한 태아영향에 관한 많은 연구결과에 의하면 방사선 및 그 외의 유해요인에 대한 착상전기의 영향은 배사망(胚死亡)(유산(流産))만이 일어나며 기형(奇形)은 유발(誘發)하지 않는다고 하여 발생학(發生學)등 여러 교과서에서 기형은 기관형성기(器官形戚期)만이 국한(局限)해서 일어나는 영향이라고 단정되어 왔었다. 그러나 이 연구결과 착상전기에 있어서도 기형이 유발하여 오히려 기관형성기((器官形成期)보다도 감수성이 높다는 것이다. 또한 착상전기에서도 기형유발의 시기특이성을 가지며 여러 종류의 기형이 발생한다는 것이 본 연구로부터 밝혀졌다. 실험동물은 ICR Mouse를 사용했다. ICR Mouse는 일반적으로 태아사망 및 기형실험에 널리 사용되는 것이다. 사육조건은 Conventional 한 조건하에서 사육했으며 Mating 방법(方法)은 Female 마우스의 발정기(Sexual Excitement period)에 있는 mouse 질(膣)을 육안 적으로 관찰하여 $AM 6:00{\sim}AM 9:00$시까지 3시간만 mate시켰다. AM9:00시에 Vaginal Plug를 관찰하여 임신을 확인했다. Plug가 확인 된 마우스는 AM8:00시에 수정(Conception)된 것으로 가정하고 이 시점을 임신 0일 0시로 수정 난의 태아연령을 산정했다. 방사선조사는 $^{135}Cs\;{\gamma}-$선을 사용하였으며 임신 마우스의 전신조사를 실시하고 조사한 시기는 각 2, 48, 72, 96hpc이며 조사한 방사선 선량 군은 $0.1{\sim}2.5Gy$이다. 태아영향 관찰지표는 태아 연령은 mate일 오전 8:00시를 임신 0일 0시로 환산하여 태아연령 18일에 임신마우스를 Cervical vertebral dislocation에 의해 도살했다. 도살 후 해부하여 각 임신 마우스별로 관찰했다. 착상 율을 관찰하기 위하여 황체수를 세었고, 태아사망과 생존태아를 구별했다. 자궁 내 사망의 분류는 태아사망을 1) preimplantation death 2) Embryonic death 3) Fetal death로 분류했다. 착상전사망은 수정후 $0{\sim}4.5$일(1세포기${\sim}$배반포후기 부화까지)까지의 사망으로써 난소의 황체수(배란 수)와 착상태아(생존태아, 착상흔, 태반유잔, 흡수태아, 침연태아의 합계)로부터 구할 수 있다. Embonic death는 수정 후 $4.5{\sim}13$일까지의 사망으로써 Implantation sites, Placental remnants, Resorption of fetus로 관찰된 것이다. Fetal death는 수정후 $14{\sim}18$일까지의 사망으로써 Maceration of fetus로 관찰되는 것이다. 통계학적 분석은 각 Group의 착상 을과 자궁 내 사망 율을 산출할 때에는 각 임신마우스에 따라 발생빈도가 크게 다르기 때문에 통계처리에는 Non parametric 검정인 Kluskal Wallis 검정을 사용하여 분석하였다. 또한 개체 Level 영향인 착상을, 태아사망, 기형의 threshold dose의 산정에 대해서는 SAS-Logistic 검정에 따라 통계 분석을 하여 $5%(Ld_5,\;ED_5)$ 및 $10%{\times}2/3$점을 threshold dose로 판단했다. 태아체 중에 대해서는 parametric검정인 t-test검정에 의하여 분석했다. 그 결과 착상전기에서도 기형이 유발하며 특히 시기에 따라 일어나는 때와 일어나지 않는 때가 있음을 본 연구로부터 밝혀졌다. 또한 착상전기의 영향으로써 유발되는 기형은 여러 종류의 기형이 발생함이 밝혀졌다. 특히 이시기는 착상전 사망 및 배(胚)사망은 방사선 선량에 따라 크게 일어나나 태아사망(Fetal death) 및 태아체중은 유의차(有意差)가 없었다.

• 한국가축번식학회지
• /
• 제26권1호
• /
• pp.1-7
• /
• 2002

본 연구는 mTCM-199, mWaymouth MB 752/1 그리고 NCSU-23 성숙배지에서 성숙시킨 난포란을 mTBM 수정배지에서 액상정액의 정자를 이용하여 주입정자 농도별로 체외 수정시킴으로써 액상정액을 이용한 새로운 체외수정 방법을 개발하고자 실시하였다. 미성숙 난포란은 0.5 $m\ell$의 성숙배지에 각 well 당 30~40개씩 적하하였다. 액상정액 제조용 정액은 90% 이상의 운동성을 가진 농후정자부분을 사용하였으며 정액채취 후 2시간 동안에 22~24$^{\circ}C$의 실온까지 냉각시켰다. 실온까지 냉각한 정액은 BTS 희석액으로 2$\times$$10^{8}$ $m\ell$ 정자농도로 조정하여 100$m\ell$ 플라스틱병에 30 $m\ell$씩 주입하여 17$^{\circ}C$에서 5일 보관하였다. 5일 보관후 운동성이 70% 이상인 정자를 체외수정에 이용하였다. 38.5$^{\circ}C$, 5% $CO_2$, 95% 공기로 조절된 CO2 배양기에서 44시간 성숙 후 cumulus cell들이 제거된 성숙 난포란은 0.5 $m\ell$의 mTBM 수정배지에 30~40개씩 적하하고 최종정자농도를 1, 2, 4, 6 그리고 10$\times$$10^{6}$$m\ell$되도록하여 주입하고 6시간 동안 수정시켰다. 체외수정시킨 수정란들은 수정 후 6시간 동안 0.5$m\ell$의 NCSU-23 배양배지에서 배양한 후 정자침입율, 다정자침입율 그리고 웅성전핵 형성율을 조사하였다. mTCM-199, mWaymouth MB 752/1 그리고 NCSU­23 성숙배지에서 성숙시킨 난포란을 mTBM 수정배지에서 액상정 액으로 체외수정 한 결과 NCSU-23 성숙배지에서 성숙한 난포란이 웅성전핵형성율이 높았고 다정자침입율이 낮았다. NCSU-23 성숙배지에서 성숙한 난포란을 mTBM 수정배지에서 수정할 경우 최적정자농도는 2~4$\times$$10^{6}$$m\ell$이었으며, 정자침입율은 50.8~50.9%, 다정자침입율은 13.3~19.5% 그리고 웅성전핵형 성율은 43.9~45.4%였다. 결론적으로 NCSU-23 성숙배지에서 성숙되고 mTBM 수정배지에서 수정된 난포란은 mTCM-199이나 mWaymouth MB 752/1 성숙배지에서 성숙되고 mTBM 수정배지에서 수정된 난포란보다 우수한 체외수정 결과를 나타내었다. 17$^{\circ}C$에서 5일 동안 보존한 액상정액으로 NCSU-23 배지에서 성숙한 난포란을 체외수정하기 위한 최적정자농도는 2~4$\times$$10^{6}$$m\ell$이었다.

• Journal of Periodontal and Implant Science
• /
• 제23권3호
• /
• pp.535-563
• /
• 1993

치주질환 진행의 최종적인 결과는 하반 지지조직의 소실로 치아상실을 초래하는 것이다. 이러한 치주질환의 이상적인 치유형태는 부착상실 예방을 비롯 상실된 조직의 재상 즉 신생 치조골과 백악질이 형성되고 두 조직사이에 치주인대가 재형성되는 것이다. 최근까지의 치주조직재생을 위한 처치법으로 이환된 병소부의 단순제거, 치관변위판막술, 약제의 치근면처리법, 조직유도재생술, 골전도물질 삽입, 골유도 혹 골형성물질 사용등 다양한 방법이 제시되었으나 아직 이상적인 치료법은 밝혀지지 않고 있다. 치아지지의 가장 중요한 역할을 하는 치조골의 재생에 대해 많은 연구들과 아울러 조직화학적 연구에서 Polypeptide Growth Factor(PGF) 가 다양한 종류의 세포증식과 이주 및 기질합성에 촉진효과가 있다고 하여 조직재생에 사용 가능성이 보고된 바 있었다. 이 PGF중 혈소판유래성장인자가 섬유아세포와 골아세포의 유사분열 및 단백질합성에 촉진작용이 있으며 조직재생에 영향을 미친다는 보고도 있었다. 본 연구의 목적은 총 8 마리의 실험동물을 이용하여 치근이개부병변을 형성한 후 혈소판유래성장인자를 처리하고 기존 조직결손부에 사용하였던 Tricalcium Phosphate(TCP) 와 콜라젠을 성장인자 함유매개체로 하여 이개부병변에 병용삽입한 경우 치유과정에 미치는 효과를 규명하여 임상적용의 가능성을 규명하고 실제 임상적용방법을 개발할 목적으로 실시하였다. 실험동물 Pentobarbital Sodium으로 전신마취를 시킨후, 초음파치석제거기등을 이용하여 구강위생을 청결하게 한 다음, 치은열구절개를 이용하여 전층판막을 형성하였다. 피질골과 치조골을 삭제하고 형성된 이개부 결손부에 치근면활택술을 시행하였으며, 구연산으로 치면처리 후, 계획된 재료를 삽입하고, 치관변위판막술과 유사한 형태의 봉합을 시행하였다. 실험동물을 2, 4, 8, 12 주에 관류고정과 아울러 회생시켜 악골을 채취하고 통법에 의해 후고정, 탈회, 탈수과정을 거쳐 파라핀으로 포매한 후 $7{\mu}m$두께로 절편하고 H & E 염색후 광학현미경으로 관찰하여 다음과 같은 결과를 얻었다. PDGF-BB 만 처리한 군에서는 2주 소견에서부터 결손부 전체에 걸쳐 활성도가 높은 조골세포들이 균일하게 분포하면서 이들로부터 생성된 골양조직이 기초적인 골소주의 형태를 이루고 있음이 관찰되었으며 그후 매우 빠른 골형성이 계속되어 8주 소견에서는 결손부 정상에 이르기까지 성숙된 치밀골이 채워져 있었다. 신생골형성의 전반적 형태는 치근면의 외형에 따라 치근이개부상단부로 형성되는 양상이었다. PDGF-BB 군에서 신생백악질의 형성은 2주소견 에서는 미약하였으나 4주이후 치근면에 수직으로 배열된 교원섬유들과 함께 균일한 두께로 형성되기 시작하여, 8주에 이르러서는 비 손상부위에서보다 더욱 두터운 신생백악질이 형성되었고 전형적인 샤피스씨 섬유가 완성되어 있음이 관찰되었다. PDGF-BB와 TCP를 병용한 경우 및 PDGF-BB와 콜라젠을 병용한 경우에서는 PDGF-BB군에 비해 신생골 및 신생백악질의 형성, 치주인대강의 발달이 상대적으로 미약하였으며 이러한 현상은 수술후 초기단계에서 더욱 두드러져 함유매개체로서의 기능을 기대하였던 이들 이식재들이 도리어 급속하게 분화 증식되는 세포들의 이동에 장애물로서 작용하는 것으로 나타났다. 결론적으로 PDGF-BB의 치근면 처리가 치근이 개부병변 치료에 있어 전반적으로 조직재생의 속도가 빠르고 그 치유양상도 시간경과에 따라 치주조직 고유형태로 진행됨이 관찰되어 동일 병소치료에 응용가능성을 확인하였다. 또한 차후 결손부에 주입방법과 성장인자의 관리법 및 적용량 그리고 적응중의 규명을 위해 연이은 연구가 있어야 할것으로 사료된다.

• Journal of Gastric Cancer
• /
• 제5권1호
• /
• pp.10-15
• /
• 2005

목적: 건강을 유지하는 데 비타민, 특히 엽산의 중요성이 근래에 강조되고 있다. 엽산의 결핍은 발달 지연을 일으켜 신생아에서 미성숙 혈관질환이나 신경관 결손 등의 중추 신경계 질환 등을 일으킬 수 있고, 급성 백혈병 같은 혈액학적 질환과도 연관된다. 또한, 과호모시스테인혈증과 연관되어 여러 폐색성 혈관성 질환 등을 유발하고, 출산 결손이나 다른 임신성 합병증을 유발하기도 한다. 특히 최근에는 위장관 신생 종양의 발생과도 연관된다고 보고되고 있다. Methylenetetrahydrofolate Reductase(MGHFR)는 엽산 대사에서 DNA 합성과 메틸화에 영향을 주는 필수 효소이다. MTHFR의 유전자 다형성은 아미노산의 변화와 효소 활성을 감소시키는 핵산의 유전자 다형성(677C $\rightarrow$T/Ala222Val)으로 정의되는데, 이때 효소 자체의 활성을 감소시켜 DNA 합성 저하와 저메틸화로 이어져 생체 내에서 발암성 변이를 일으켜 위장관계 종양과 연관된다. 우리는 MTHFR의 유전자 다형성과 위암의 발생 위험과의 관련성을 알아보기 위하여 본 연구를 시행하였다. 대상 및 방법: 2003년 7월부터 2004년 6월까지 위암으로 진단 받은 환자군 96명과 건강 검진에서 정상으로 판정 받은 대조군 287명의 혈청 표본으로 PCR-RFLP방법으로 MTHFR의 유전자 다형성을 구하여 위암에서의 연관성을 비교하였고, 환자군 내에서 암의 발생 위치와 낮은 체내 엽산 농도에 영향을 미치는 흡연력과 음주력에 대해 비교 하였다. 결과: 위암 환자 중 남자 69명($72\%$), 여자 27명($28\%$)이었고, 위 하부 58예($60\%$), 위 중부 20예($21\%$), 위 상부 18예($9\%$)였다. 위암 환자 중 흡연력이 있는 경우는 56명, 없는 경우는 40명이었고, 음주력이 있는 경우는 45명, 없는 경우는 51명이었다. 환자군에서 MTHFR의 유전자 다형성은 C/C 18($19\%$), C/T 59($61\%$), T/T 19($20\%$)였고, 대조군에서는 C/C 116($40\%$), C/T 103$40\%$), T/T 68($24\%$)이었다(P=0.045). 암의 위치에 따른 MTHFR유전자형의 분포는 위 하부에서 C/C 16($28\%$), C/T & T/T 42($77\%$)이었고, 위 중부 및 상부에서 C/C 2($5\%$), C/T & T/T 36($75\%$) 이었다(P=0.006). 환자군 내에서 흡연력 유무에 따른 MTHFR유전 자형의 분포는 흡연력이 있을 때 C/C 13($23\%$), C/T & T/T 43($77\%$)이었고, 흡연력이 없을 때 C/C 5($12\%$), C/T & T/T 35 ($88\%$)였다(P=0.189). 환자군 내에서 음주력 유무에 따른 MTHFR유전자형의 분포는 음주력이 있을 때 C/C 12($26\%$), C/T & T/T 33($74\%$)이었고, 음주력이 없을 때 C/C 6($12\%$), CT & T/T 45($88\%$)였다.(P=0.063). 결론: 본 연구에서는 MTHFR C/T & T/T 유전자 다형성이 위암의 발생과 그 위치에 대해 관련이 있는 것으로 여겨지고, 흡연력, 음주력과는 관련이 없는 것으로 여겨진다.

• 한국미생물·생명공학회지
• /
• 제46권4호
• /
• pp.360-371
• /
• 2018

1. Agar diffusion test를 통해 지모 뿌리 추출물의 항균활성 확인 결과 호기성 그람 양성 균주인 S. aureus에서 추출물 및 모든 분획물에서 저해환을 나타내었고, 에틸아세테이트 분획물이 대조군으로 사용된 메틸파라벤보다 더 높은 항균활성을 나타내었다. 2. 최소저해농도(MIC)와 최소사멸농도(MBC/MFC)를 통해 더 정확한 지모 뿌리 추출물의 항균활성을 확인하고자 하였다. 그 결과 곰팡이균인 A. niger를 제외한 모든 균주에서 MIC 농도를 확인하였고, 특히 호기성 그람 양성 균주인 S. aureus와 호기성 그람 음성 균주인 P. aeruginosa 그리고 진균인 C. albicans에서 에틸아세테이트 분획과 아글리콘 분획물이 낮은 농도에서 각 균주를 저해하는 것을 확인하였다. 3. DPPH법을 통해 지모 뿌리 추출물의 자유 라디칼 소거활성($FSC_{50}$)을 확인한 결과 가장 높은 활성을 나타낸 것은 에틸아세테이트 분획물($23.19{\mu}g/ml$)이고 아글리콘 분획물($71.06{\mu}g/ml$), 50% 에탄올 추출물($146.2{\mu}g/ml$) 순서로 나타났다. 4. 지모 뿌리 추출물의 총 항산화능($OSC_{50}$)을 확인하기 위해 luminol 발광법을 통해 확인하였다. 실험 결과 에틸아세테이트 분획물($1.5{\mu}g/ml$)과 아글리콘 분획물($1.4{\mu}g/ml$)이 대조군으로 사용된 L-ascorbic acid ($1.3{\mu}g/ml$)과 비슷한 활성을 나타내며 높은 총 항산화능을 나타내었다. 또한 에틸아세테이트 분획물이 50% 에탄올 추출물보다 약 11배 더 높은 활성을 띄는 것을 확인하였다. 5. $^1O_2$으로 유도된 세포 파괴에 대한 세포보호 효과(${\tau}_{50}$)를 확인한 결과 지모 뿌리 추출물과 분획물 모두 농도의존적으로 세포보호효과를 나타내었다. 50% 에탄올 추출물은 $8{\mu}g/ml$의 농도(34.5 min)에서, 에틸아세테이트 분획물은 $4{\mu}g/ml$의 농도(64.4 min)에서, 아글리콘 분획물은 $8{\mu}g/ml$의 농도(215.9 min)에서 가장 높은 보호효과를 나타냄을 확인하였다. 6. 지모 뿌리 추출물의 HaCaT 세포독성평가를 진행한 결과, 본 실험에서는 $0.02-2{\mu}g/ml$로 농도를 설정하여 세포보호실험을 진행하였다. 7. 과산화수소로 유도된 세포 손상에 대한 세포 보호 효과를 확인한 결과, 50% 에탄올 추출물과 에틸아세테이트 분획물 및 아글리콘 분획물의 최대 생존율은 각각 86.23, 86.59 및 89.70%를 나타냈으며 과산화수소를 처리한 양성 대조군에 비하여 세포 생존율을 각각 8.07, 8.42 및 11.53% 증가시켰다. 8. HaCaT세포에 UVB를 조사하여 세포 내 ROS 소거활성 평가를 진행한 결과, 자외선으로 유도된 세포 손상에서 아글리콘 분획물은 $2{\mu}g/ml$ 농도에서 UVB를 처리한 양성 대조군 대비 41.77%까지 세포내 ROS를 감소시켰다. 9. 실험을 통해 높은 생리활성을 나타낸 지모 뿌리 에틸아세테이트 분획물을 TLC 및 LS/ESI-MS를 통해 성분분석을 진행하였다. 그 결과 mangiferin, isomangiferin, timosaponin-A-III, nyasol을 확인하였다.본 연구의 결과를 통해 지모 뿌리 추출물의 항균 및 항산화 작용과 더불어 세포보호효과를 통해 천연 화장품 소재로서의 응용 가능성이 있음을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.