• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.587-591
• /
• 2009

Lithium salt have been used mainly as electrolyte of thermal battery for electricity storage. Recently, The 3phase lithium salt(LiCl-LiF-LiBr) is tried to use as electrolyte of thermal battery for high electric power. It is reported that LiCl-LiF-LiBr salt have high ion mobility due to its high lithium ion concentration. Solid lithium salt is melt to liquid state at above $500{^{\circ}C}$. The lithium ion is easily reacted with support materials. Because the melted lithium ion has small ion size and high ion mobility. For the increasing mechanical strength of electrolyte pellet, the research was started to apply ceramic filter to support of electrolyte. In this study, authors used SiOC web and glass fiber filter as ceramic mat for support of electrolyte and impregnated LiCl-LiF-LiBr salt into ceramic mat at above $500{^{\circ}C}$. The fabricated electrolyte using ceramic mat was washed with distilled water for removing lithium salt on ceramic mat. The washed ceramic mat was observed for lithium ion reaction behavior with XRD, SEM-EDS and so on.

• 한국안광학회지
• /
• 제6권1호
• /
• pp.149-153
• /
• 2001

LiF:Mg, Cu, Na, Si TL 물질의 열자극발광을 온도대 파장대 발광강도의 3차원으로 측정하여 분석하였다. 온도대 발광강도곡선(glow curve)은 각 온도에서 파장별 발광강도데이터를 적분하여 구성하였고, 이를 분석하여 트랩에 관계되는 여러가지 파라미터들을 결정하였다. 발광곡선의 분석은 일반차 모델의 TL 강도 표현식을 기본함수로 하여 컴퓨터화된 발광곡선 분해(Computerized Glow Curve Deconvolution: CGCD)기법을 이용하였고, 그 결과 LiF:Mg, Cu, Na, Si TL 물질의 열자극발광곡선은 정점온도 333 K, 374 K 426 K, 466 K, 483 K 그리고 516 K를 갖는 6개의 개별적인 발광곡선들로 구성되어 있음을 확인하였다. 주 피크(main peak)인 456 K 발광곡선에 대하여 활성화에너지는 2.06 eV, 발광차수는 1.05로 밝혀졌다. 발광스펙트럼 분석결과 LiF:Mg, Cu, Na, Si TL 물질은 3개의 재결합준위 1.80 eV, 2.88 eV 그리고 3.27 eV를 가지는 것으로 판명되었다. 이 중 약 2.88 eV 준위가 지배적이고 다음으로 3.27eV 준위에서 발광이 일어나며 1.80 eV 준위는 극히 미약하나 분명한 존재를 확인하였다.

• Journal of Radiation Protection and Research
• /
• 제13권2호
• /
• pp.9-20
• /
• 1988

자연 방사선 피폭선량 중 우주선 전리 성분의 기여를 정량하기 위하여 LiF TLD를 이용하여 약 1년반에 걸쳐 3개월 간격의 주기적 측정을 수행하였다. TLD는 세 가지를 사용하였는데 그것은 칩과 PTFE원판형으로 된 두 가지의 $^{7}LiF$와 중성자 성분의 기여를 가려내기 위한 원판형의 $^{6}LiF$였다. 선량 측정은 뱃지에 넣은 TLD를 충남대학교 대덕 캠퍼스의 한4층 콘크리트 건물내 3층의 한 연구실에 설치한 10-15cm 두께의 납차폐 상자에 넣어서 90일 간격으로 다섯주기 동안 수행하였다. 비교 연구를 위하여 3'${\phi}\;{\times}\;3$'원통형NaI(Tl) 섬광 검출기와 1024채널 MCA를 이용하여 3MeV 이상의 우주선 경성분에 대한 분광분석을 병행하였는데 그 결과 옥내 차폐체를 이용한 TLD측정치는 옥외 우주선 전리 성분의 약 75%를 측정하고 있음이 밝혀졌다. 이와 같은 차폐 손실을 보정한 TLD측정 결과에 의하면 충남대 대덕 캠퍼스 옥외에서 우주선 전리 성분의 기여는 $34.3{\pm}1.1nGy-h^{-1}$로 나타났는데 이것은 이 측정 지점에서 예측할 수 있었던 선량 값과 매우 잘 일치하는 것이다.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.517-523
• /
• 2008

The microwave dielectric properties of $LiNb_3O_8-TiO_2$ based ceramics with low firing agents, CuO, $Bi_2O_3$, $B_2O_3$, $SiO_2$, $TiO_2$, were investigated to improve the sintering condition for the LTCC system. According to the X-ray diffraction and SEM, the ceramics of $LiNb_3O_8-TiO_2$ with low firing agents showed no significant second phases within a range of experiments, and fine microstructures. By adding the low firing agents, the sintering temperature decreased from $1200^{\circ}C$ to $925^{\circ}C$. Based on the results of electrical measurements, the $LiNb_3O_8-TiO_2$ ceramics showed a promising microwave dielectric properties for LTCC applications, those are ${\varepsilon}_r$ (dielectric constant) = 44, Q f (quality factor) = 18000, and ${\tau}_f$ (the temperature coefficient of resonant frequency) = $-1.5\;ppm/^{\circ}C$.

• 한국분말재료학회지
• /
• 제30권6호
• /
• pp.516-520
• /
• 2023

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO₄ is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO₄O has two redox reactions (V⁵⁺/V⁴⁺/V³⁺) but low electrochemical activity. In this study, LiVPO₄O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO₄O_1-xF_x, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.96-99
• /
• 2000

We fabricated electroluminescent(EL) devices which have a blended single emitting layer containing poly(N-vinylcarbazole)[PVK] and poly(3-dodecylthiophene)[P3DoDT]. The molar ratio between P3DoDT and PVK changed with 1:0, 2:1 and 1:1. To improve the external quantum efficiency of EL devices, we applied insulating layer, LiF layer, between polymer emitting layer and Al electrode. All of the devices emit orange-red light and its can be explained that the energy transfer occurs from PVK to P3DoDT. In the voltage-current and voltage-light power characteristics of devices applied LiF layer, current and light power drastically increased with increasing applied voltage. In the consequence of the result, the external quantum efficiency of the devices that have a molar ratio 1:1 with LiF layer was 35 times larger than that of the device without LiF layer at 6V.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.381-386
• /
• 2012

To study encapsulation method for large-area organic light emitting diodes (OLEDs), red emitting OLEDs were fabricated, on which $Alq_3$ as organic buffer layer and LiF and Al as inorganic protective layers were deposited to protect the damage of OLED by epoxy. And then the OLEDs were attached to flat glass by printing method using epoxy. The basic structure of OLED doped with rubrene of 1 vol.% as emitting layer is ITO(150 nm) / 2-TNATA(50 nm) / ${\alpha}$-NPD(30 nm) / $Alq_3$:Rubrene(30 nm) / $Alq_3$(30 nm) / LiF(0.7 nm) / Al(100 nm). In case of depositing $Alq_3$, LiF and Al and then attaching of flat glass onto OLED, current density, luminance, efficiency and driving voltage were not changed and lifetime was increased according to thickness of Al as inorganic protective layers. The lifetime of OLED/$Alq_3$/LiF/Al_4/glass structure was 139 hours increased by 15.8 times more than bare OLED of 8.8 hours and 1.6 times more than edge sealed OLED of 54.5 hours.

• Nuclear Engineering and Technology
• /
• 제36권1호
• /
• pp.47-52
• /
• 2004

Recently, a new sintered pellet-type LiF:Mg,Cu,Na,Si TL detector which has a high sensitivity and good reusability, named KLT-300(KAERI LiF:Mg,Cu,Na,Si TL detector), was developed by the variation of the dopants concentrations and the parameters of the preparation procedure at KAERI (Korea Atomic Energy Research Institute). In this study, the thermoluminescent characteristics of the newly developed TL detectors were investigated. The sensitivity of the TL detector was compared with that of the TLD-100 by light integration. The dose linearity of the detector was tested from $10^{-6}$ Gy up to 30 Gy. The dose response was very linear up to 10 Gy and a sublinear response was observed at higher doses. The energy response of the detector was studied for photon energies from 20 keV to 662 keV. The result shows that a maximum response of 1.004 at 53 keV and a minimum response of 0.825 at 20 keV were observed. The reproducibility study for the TL detector was also carried out. The coefficients of variation for each detector separately did not exceed 0.016, and for all the 10 detectors collectively was 0.0054. Lower limit of detection for the detector was investigated at 70 nGy by the Harshaw 4500 TLD Reader and the residual signal of the TL detector was found to be $0.57\%$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.332-335
• /
• 2000

We fabricated organic electroluminescent (EL) devices with single layer of poly(3-dodeoylthiophene) (P3DoDT) hlended with different amounts of poly(N-vinylcarbazole) (PVK) as a emitting layer. The molar ratio between P3DoDT and PVK changed with 1:0, 2:1 and 1:1. To improve the external quantum efficiency of EL devices, we applied insulating layer, LiF layer, between polymer emitting layer and Al electrode. All of the devices emit orange-red light and it's can be explained that the energy transfer occurs from PVK to P3DoDT. In the voltage-current and voltage-brightness characteristics of devices applied LiF layer, current and brightness increased with increasing applied voltage. The brightness of the device have a molar ratio 1:1 with LiF layer was about 10 times larger than that of the device without PVK at 6V. Electrical impedance properties of ITO/emitting layer/LiF/Al devices were investigated. In the Cole-Cole plots of impedance data, one semicircle was observed. Therefore, the equivalent circuit for the devices can be designed as a single parallel resistor and capacitor network with series resistor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.69-70
• /
• 2006

We studied increasement of efficiency of Organic Light-emitting Diodes depending on thickness variation of LiF, Material of Electron Injection Layer in structure of ITO/Hole Injection Layer (PTFE)/Hole Transportion Later (TPD)/Emitting Layer (Alq3)/Electron Injection Layer (LiF)/Al. TPD and $Alq_3$ is deposited as rate of 1.3~1.5 [${\AA}/s$] in high vacuum ($5{\times}10^{-6}$ [torr]). In result of these studies, we can know maximum efficiency in 0.7 [nm], thickness of LiF. And samples with electron injection material are increased about 5-fold in maximum efficiency in compare with sample without electron injection material.