• ETRI Journal
• /
• 제32권5호
• /
• pp.819-822
• /
• 2010

Supporting QoS over multihop wireless mesh networks is difficult because end-to-end delay increases quickly with the increasing number of hops. This paper introduces a novel multichannel time-division multiple-access media access control (McTMAC) protocol that can help to efficiently reduce delay over multihop networks. Performance evaluation results demonstrate that McTMAC outperforms existing alternative protocols. The max-delay can be reduced by as much as 60% by using McTMAC.

• 조명전기설비학회논문지
• /
• 제24권6호
• /
• pp.60-66
• /
• 2010

국내 외 메쉬접지극은 격자형태의 등간격 접지Grid로 설계하고 있다. 격자형 접지Grid의 경우 구석의 접촉전압이 중심 부분에 비해 높아지는 문제점이 있다. 이러한 문제점을 극복하기 위해 사선형태의 접지 Grid를 사용하면 메쉬전압이 발생하는 구석부분의 면적이 감소함으로써 메쉬전압이 감소한다. 따라서 본 논문에서는 기존의 격자형태의 접지Grid의 형태와 다르게 사선형태의 접지Grid를 제안하며, 격자형태의 접지Grid와 사선형태의 접지Grid로 설계된 메쉬접지극에 동일한 접지설계제원을 적용하고 메쉬전압, GPR, 접지저항, 접지도체의 총길이를 비교 검토하여 사선형태 접지Grid의 우수성을 검증하였다.

• 동력기계공학회지
• /
• 제4권1호
• /
• pp.60-67
• /
• 2000

As the speed of rotating machines increases and also their weight decreases, the coupling between lateral and torsional vibrations must be considered. In the past, rotordynamics and geardynamics have tended to treat the lateral and torsional vibrations of the system elements as separate and decoupled mechanisms. In the paper, the coupled lateral-torsional free and forced vibration of rotors trained by gears is analyzed using finite element method. Also the complicated variation of the meshing stiffness as a function of contact point along the line of action is estimated correctly. The gear mesh model is assumed to be linear with constant average mesh stiffness.

• 조명전기설비학회논문지
• /
• 제27권5호
• /
• pp.54-60
• /
• 2013

There is increasing demand for practical groundings for small-area substations because of the recent revision of Korea's Electrotechnical Regulations, which necessitates the method of evaluating their safety. This paper proposes a practical mesh grounding system for 22.9kV substations and studies how to evaluate its safety. The proposed grounding system is proved to obey the safety criteria of ANSI/IEEE Std. 80 via ANSI/IEEE Std. 80 method and computer simulation.

• International Journal of Safety
• /
• 제8권2호
• /
• pp.20-25
• /
• 2009

In this study, an experiment in the field was performed to analyze the mechanical properties and the influence of steel fiber and silica fume on the rebound ratios of shotcrete. The experimental parameters which are the reinforcing methods (steel fiber, wire mesh), steel fiber contents (0.0%, 0.5%, 0.75%, 1.0%), silica fume contents (0.0%, 10.0%), layer thickness (60 mm, 80 mm, 100 mm), and the placing parts (sidewall, shoulder, crown) were chosen. From the mechanical test, it was found that the flexural strength and toughness is significantly improved by the steel fiber and/or silica fume. According to the results for the side wall in this test, the larger the fiber contents are in case of steel fiber reinforced shotcrete, the less the rebound ratios are within the range of 20-35%, compared to the wire mesh reinforced shotcrte. And also, the reduced rebound ratios were very larger in using steel fiber reinforced shotcrete with silica fume content of 10%, and these results are true of the shoulder and the crown. respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제37권6호
• /
• pp.505-516
• /
• 2009

본 연구에서는 다른 목재수종과 다른 입자크기의 목분 및 상용화제를 첨가한 Wood Plastic Composites (WPC)를 제조한 후 다양한 물성을 평가하였다. 먼저 3가지 다른 수종으로부터 얻은 목분의 화학조성분의 함량이 화학분석으로부터 얻어졌다. 낙엽송(Larix kaempferi Lamb.), 상수리(Quercus accutisima Carr.), 다릅나무(활엽수, Maackia amuresis Rupr. et Maxim)로부터 40~60 mesh와 80~100 mesh의 목분을 제조하여 열가소성 폴리머의 일종인 폴리프로필렌(polypropylene)에 용융 압출 및 사출하여 복합재를 제조한 후 인장강도, 휨강도, 충격강도 및 현미경 분석을 수행하였다. 알파 셀룰로오스는 상수리나무가 43.6%, 다릅나무가 41.3%, 낙엽송이 36.2%였다. 리그닌의 함량은 낙엽송이 31.6%로 가장 높았으며, 상수리나무가 24.4%로 가장 낮았다. 추출물의 함량은 낙엽송이 8.5%, 다릅나무와 상수리나무는 각각 4.4%와 3.9%였다. 알파 셀룰로오스의 함량이 증가하고 리그닌과 추출물의 함량이 감소할수록, WPC의 인장 및 휨강도 특성이 높았다. 같은 목분의 첨가량에서 작은 입자크기의 목분(80~100 mesh)이 큰 입자크기의 목분(40~60 mesh)에 비하여 WPC의 인장 및 휨강도 특성이 크게 높았다. WPC의 충격강도는 목재수종에 따른 영향이 적었으나, 입자의 크기가 큰 목분을 첨가한 WPC의 충격강도가 대체적으로 높았다. 상용화제인 Maleated polypropylene (MAPP)의 첨가는 수종과 다른 입자크기에 관계없이 인장강도, 휨강도 및 충격강도를 증가시켰다. 현미경 분석 결과, MAPP의 첨가에 의해 목분과 PP수지 간의 계면 결합력이 개선됨을 확인할 수 있었다.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.10-19
• /
• 2012

The mesh selectivity of a drift net for yellow croaker (Larimichthys polyactis) was examined in field experiments with six different net mesh size (40, 45, 50, 55, 60 and 65mm) from April to December, 2008 in the coastal areas of Jeollanam-do in Korea. The total catch of 6,748 consisted of yellow croaker (n=6,310; 89.1% of total catch), common mackerel (n=158; 5.6%) and other species (n=280; 9.6%). The selectivity curve for yellow croaker was fit by the models of selectivity curve in SELECT method. The optimal mesh size for 50% retention for minimum landing size (191mm) of yellow croaker was estimated as 49.6mm-51mm by selectivity curves. And the bi-normal model for the selectivity curve was found to fit the data best.

• 한국식품저장유통학회지
• /
• 제6권1호
• /
• pp.76-80
• /
• 1999

Power consumption, mesh size, moisture content, color difference, amylogram of rice flour milled with the water soaked rice were compared with that of rice using dry pin mill process. The rice was soaked in 23, 24, 25, 26% of water for 10hr, independently. The more rice had moisture content, the less power consumption was needed. Power consumption to mill the rice soaked in 25% of water was less than that of dry rice by 6.8kW/100Kg. Moisture content of rice flour from the rice soaked with 25% of water was 2% higher than that of rice flour from the rice soaked with 23% of, water. Population of flour particle from the rice soaked with 24-25% of water was 45.7∼46.25 of 60 mesh, 9.7∼10.4% of 80∼100 mesh and 7.7∼8.1% of 100 mesh. Gelatinization temperature of rice flour from the rice soaked with 23% and 24∼25% of water was 65.70C and 64.50C, independently. Temperature of rice flour from the rice soaked with 23% 24∼25% of water sith minimum viscosity was 85.50C and 88.4∼88.70C, independently. Brightness and whiteness of the rice flour from the rice soaked with 24∼25% of water were 95.90∼95.95 and 905.82∼95.94, independently. Brightness and whiteness of the rice flour from the soaked rice were 1.2 and 1.7 higher than that of rice flour from the dry rice, independently.

• 한국연초학회지
• /
• 제26권2호
• /
• pp.126-134
• /
• 2004

Tobacco dust samples were collected for two times in primary and secondary process at 4 cigarette manufacturing factories(Shintanzin, Youngju, Wonju, Kwangju) and analyzed to evaluate usage as a raw material in production of reconstituted tobacco. The chemical constituents and HWS of tobacco dust were analyzed. Tobacco dust samples were partitioned by particle size using a series of screens ranging from 20 to 200 mesh. The amount of material retained in each fraction was quantified and sand content was also determined. Appreciable average amounts$(40-65\%)$ material at 4 locations were found to be larger than 60 mesh. Although the amount of material in each fraction increased to a maximum at 100 mesh and then decreased, the $\%$ sand continually increased with decreasing particle size. The chemical constituents and HWS content of tobacco dust have similar values in secondary process of 4 cigarette manufacturing factories but the those of primary process have different values according to the site of occurrence and manufacturing factories.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.195-201
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, several kinds of combined wire screen meshes were used. The results are summarized as follows; The packed meshes with high mesh no. in the side of heater part of regenerator showed effective than the packed meshes with low mesh no. in the side of cooler part of regenerator. The temperature difference and pressure drop of the regenerator were not made by the specific surface area of wire screen meshes but by the minimum free-flow area to the total frontal area. Among the No. 150 single screen meshes, 200-60 combined meshes, the 200-150-100 combined meshes showed the highest in effectiveness.