• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.957-967
• /
• 1994

The purpose of this study was to evaluate the effects of different bases of ceramic brackets on shear bond strength and to observe failure patterns of bracket bondings. Lower bicuspid brackets whose bases designed for the macromechanical and silane treated chemical bonding those for silane treated chemical bonding, those for micromechanical bonding, and those for macromechanical bonding were tested as experimental groups, and foil mesh-backed metal brackets as a control group. All the brackets were bonded with $Mono-Lok\;2^{(TM)}$ on the labial surface of extracted human lower bicuspids after etching the enamel with $38\%$ phosphoric acid solution for 60 seconds. The shear bond strengths were measured on the universal test machine after 24 hours passed in the $37^{\circ}C$ water bath. The gathered data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. The shear bond strengths of brackets for macromechanical and chemical bonding, those for chemical bonding, and those for micromechanical bonding were not different (p>0.05), but showed statistically higher than those of metal bracket and those of ceramic bracket for micromechanical bonding(p<0.05). The shear bond strengths of ceramic bracket for micromechanical bonding showed statistically lower than those of metal bracket(p<0.05). The enamel fractures and/or ceramic bracket fractures were observed in the cases of higher bond strength than that of metal bracket. These results supported that silane treated base of ceramic bracket show higher shear bond strength than that of metal bracket, and suggested that micromechanical form of ceramic bracket bases show higher shear bond strength than that of macromechanical form.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.192-209
• /
• 1995

The purpose of this study was to evaluate drug-loaded biodegradable membranes for guided tissue regeneration(GTR). The membranes were made by coating mesh of polyglycolic acid(PGA) with polylactic acid(PLA) containing 10% flurbiprofen or tetracycline. The thickness of membrane was $150{\pm}30{\mu}m$, and the pore size of surface was about $8{\mu}m$ in diameter. The release of drugs from the membrane was measured in vitro. Cytotoxity test for the membrane was performed by gingival fibroblast cell culture, and the tissue response was observed after implant of membrane into the dorsal skin of the rat for 8 wks. Ability to guided tissue regeneration of membranes were tested by measuring new bone in the calvarial defects(5mm in diameter) of the rat for 5 weeks. The amount of flurbiprofen and tetracycline released from membrane were about 30-60% during 7 days. Minimal cytotoxity was observed in the membrane except 20% drug containing membrane. In histologic finding of rat dorsal skin, many inflammatory cells were observed around e-PTFE, polyglactin 910 and PLAPGA membrane after 1 or 2 weeks. PLA-PGA membrane was perforated by connective tissue after 4 or 6 weeks, and divided as a segment at 8 weeks. In bone regeneration guiding potential test, tetracycline loaded membrane was most effective (p

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.82-93
• /
• 2008

The flowfield behind two cylinders and flow-induced noise generated from the cylinders in various arrangement are numerically investigated based on the finite difference lattice Boltzmann model with 21 velocity bits. which is introduced a flexible specific heat ${\gamma}$ to simulate diatomic gases like air. In an isolated cylinder with two type of mesh. some flow parameters such as Strouhal number $S_t$ and acoustic pressure ${\Delta}p$ simulated from the solution are given and quantitatively compared with those provided the previous works. The effects of the center-to-center pitch ratio $L_{cc}/d=2.0$ in staggered circular cylinders as shown in Fig. 1 and angles of incidence ${\alpha}=30^{\circ}(T_{cc}/d=0.5)$, $45^{\circ}(T_{cc}/d =0.707)$ and $60^{\circ}\;(T_{cc}/d=0.866)$, respectively, are studied. Our analysis focuses on the small-scale instabilities of vortex shedding, which occurs in staggered arrangement. With the results of drag $C_d$ and lift $C_l$ coefficients and vorticity contours. the mechanisms of the interference phenomenon and its interaction with the two-dimensional vortical structures are present in the flowfields under $Re\;{\le}\;200$. The results show that we successively capture very small pressure fluctuations, with the same frequency of vortex shedding, much smaller than the whole pressure fluctuation around pairs of circular cylinders. The upstream cylinder behaves like an isolated single cylinder, while the downstream one experiences wake-induced flutter. It is expected that, therefore, the relative position of the downstream cylinder has significant effects on the flow-induce noise, hydrodynamic force and vortex shedding characteristics of the cylinders.

• The Research Journal of the Costume Culture
• /
• v.26 no.4
• /
• pp.613-631
• /
• 2018

The purpose of this study is to collect and analyze costumes presented in international dance sports competitions, and summarize the features of Latin American dance costumes' design. As for research methods, standards of Latin American dance costume design were analyzed via a literature review on dance sports. The scope of the study extended for six years from 2010 to 2015 to include the, top three UK Latin American dance competitions. The results are as follows. First, the silhouette analysis determined that the X silhouette to the lead with, -145 costumes (78%), followed by the H silhouette at 25 (13%), and other at 16 (9%). Amongst those there were 174 one-piece dresses (94%). Furthermore, the analysis on colors of Latin American dance sports costumes revealed that, amongst the 186 costumes, 115 were without color (62%), Bl(black) is the most frequent with 37%, then Wh(white) with 21% and Gr(gray) with 4%. Costumes with colors, based on the six basic colors in the Munsell color system, are comprised most often of red with 12%, the followed by Y(yellow) at 10%, B(blue) at 8%, YR(yellow-red) at 4%, P(purple) at 2%, and G(green) at 2%. Thirdly, the cloth materials of Latin American dance costumes are recognized through image inspection. Among visually recognizable materials, beading materials are the most common with 104 costumes (60%). Shiny materials like mesh, chiffon, organza, lace and burn-out are in 36 costumes in total (19%). Other cloth materials included Luster materials and; non-sheen materials, which were in 46 costumes (25%).

• Journal of Sensor Science and Technology
• /
• v.29 no.4
• /
• pp.255-260
• /
• 2020

In this study, we developed a method of improving the surface-enhanced Raman spectroscopy (SERS) response characteristics by depositing a nanoporous Ag metal thin film through cluster source sputtering after forming a pyramidal texture structure on the Si substrate surface. A reactive ion etching (RIE) system with a metal mesh inside the system was used to form a pyramidal texture structure on the Si surface without following a complicated photolithography process, unlike in case of the conventional RIE system. The size of the texture structure increased with the RIE process time. However, after a process time of 60 min, the size of the structure did not increase but tended to saturate. When the RF power increased from 200 to 250 W, the size of the pyramidal texture structure increased from 0.45 to 0.8 ㎛. The SERS response characteristics were measured by depositing approximately 1.5 ㎛ of nanoporous Ag metal thin film through cluster sputtering on the formed texture structure by varying the RIE process conditions. The Raman signal strength of the nanoporous Ag metal thin film deposited on the Si substrate with the texture structure was higher than that deposited on the general silicon substrate by up to 19%. The Raman response characteristics were influenced by the pyramid size and the number of pyramids per unit area but appeared to be influenced more by the number of pyramids per unit area. Therefore, further studies are required in this regard.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.4
• /
• pp.283-289
• /
• 1988

Lysine is known as a limiting amino acid in barley and easily inactivated by the browning reaction during processing or storage. The barley powders ground to 120 mesh in particle size were controlled at water activity of 0.44, 0.52, 0.65 and 0.75 by using saturated salt solutions and then stored at 35, 45 $55^{\circ}C$. Another portion of the sample of which the water activities were controlled as same above was stored at 35, 45, and $55^{\circ}C$ alternately with 7days interval. The reaction of available lysine loss in barley powders was found to be first order. The activation energies calculated from Arrhenius plot ranged $6.02{\sim}10.32Kcal/mole$, and $Q_10$ values were between 1.34 and 1.65. These kinetic parameters were used to predict the available lysine loss of barley powders under the fluctuating temperature storage The predicted shelf-life at various water activities tested was a little higher than the actual values.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.34-41
• /
• 2013

In this study, we investigated the physical properties of powders made from agricultural byproducts, including rice straw, peanut husks, and garlic stems, to manufacture a new organic filler used for making paperboard. These materials were collected individually, and then we measured their chemical compositions. The byproducts were ground with a laboratory grinder and fractionated with 60-, 100-, and 200-mesh sieves to make many grades of organic fillers. After the grinding and fractionation, the yield, mean particle size, and particle size distribution of each grade were measured. Particle shapes were also investigated using a scanning electron microscope. The organic filler made from rice straw had the highest yield of the largest particle size group and higher contents of cellulose and hemicellulose than those made from peanut husks and garlic stems. The rice straw also showed more regular particle shapes and a lower aspect ratio than the other agricultural byproducts.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.505-505
• /
• 2009

The object is to optimize the best condition of organosolv pretreatment process with sulfuric acid as a catalyst. As a material, Pitch pine (Pinus rigida) was ground and sieved through 40-mesh screen, and Celluclast and $\beta$-glucosidase were used as enzymes for enzymatic hydrolysis. Pretreatment processes were carried out in the minibomb, and 20 g of materials with 200 ml of 50% ethanol solution (v/v) with 1% sulfuric acid as a catalyst. Pretreatment temperature was varied from $150^{\circ}C$ to $190^{\circ}C$, and time was varied from 0 to 20 min. Then, residual materials were used for enzymatic hydrolysis. The best conditions were selected by estimating followed enzymatic hydrolysis rate and degradable rates after pretreatment process. The highest value of enzymatic hydrolysis rate was obtained as 55 - 60% at 160 and at $180^{\circ}C$, but the value decreased under more severe conditions. As the residual rates decreased under severe conditions, it infered that the decrease of sugar contents limits enzymatic hydrolysis rates. Combined with enzymatic hydrolysis rate, degradable rates and H-factors, the temperatures at $160^{\circ}C$ for 20 min and at $180^{\circ}C$ for 0 min were concluded as the optimized conditions where have the lowest H-factor value for considering energy input.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.529-536
• /
• 2002

The performance of stilting engine, in particular, its energy conversion efficiencies are critically influenced by the regenerator characteristics. The regenerator characteristics are influenced by effectiveness, void fraction. heat transfer loss and fluid friction loss in the regenerator matrix. These factors were influenced by the surface geometry and material properties of the regenerator matrix. The regenerator design goals arc good heat transfer and low pressure drop of working Bas across the regenerator. Various data for designing a wire screen matrix have been given by Kays and London(1984). The mesh number of their experiment. however, was confined below the No. 60. which seems rather small for the Stirling engine applications. In this paper. in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed mettled of matrix in oscillating flow as the same condition of operation in a Stirling engine. Seven kinds of sing1e wire screen meshes were used as the regenerator matrices. The results are summarized as follows; 1. While the working fluid flew slowly in the regenerator. the temperature difference was great at the both hot-blow(the working fluid flows from healer to cooler) and cold-blow(the working fluid flows from cooler to healer). On the other hand. while the working fluid flew fast. the temperature difference was not distinguished. 2. The No.150 wire screen used as the regenerator matrix showed excellent performance than tile others. 3. Phase angle variation and filling rate affected heat transfer or regenerator matrices. 4. Temperature difference between the inlet and outlet of the regenerator is very hish in degree of 120 phase angle.

• Korean journal of food and cookery science
• /
• v.8 no.3
• /
• pp.233-239
• /
• 1992

The characteristics of Packsulgi were investigated with different cooking methods of conventional and pressure cookers and variation in panicle size of rice flour. The water contents of rice f1ours and Packsulgis were greater as the particle became coarser. The water contents of Packsulgis cooked with pressure cooker (P) were greater than those of conventional cooker (C). Degree of gelatinization in P was higher than that of C. There were no significant differences among the samples of P, whereas coarser f1ours tended to show higher degree of gelatinization than finer ones in C. The results of textural properties measured by rheometer showed that hardness, cohesiveness and gumminess of P was higher than that of C. The textural parameter of P increased as the particle became finer, whereas mat of C increased as the particle became coarser. L value of C was higher than that of P in me same particle size, whereas a and b value of P was higher than that of C. L and a value of both P and C increased as the particle became finer. b value in P increased as the particle became coarser, whereas mat in C increased as the particle became finer. According to me sensory evaluation, the appearance of C was more acceptable man that of P, whereas the texture of P was more acceptable than mat of C. There were no significant differences in overall quality among P and c and Packsulgis made by 60, 100 mesh rice f1our had higher acceptability than others.