• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.407-417
• /
• 2002

Species composition and abundance of zooplankton were investigated around Dokdo in the East/Japan Sea in autumn 1999 and spring 2000. Vertical and horizontal hauls of a bongo net ($300{\mu}m$ mesh size, 60cm diameter) were made to collect zooplankton sample. Surface temperature and salinity ranged from $24.2^{\circ}C\;to\;25.1^{\circ}C$, and from 32.9psu to 33.2psu in September 1999, respectively. In May 2000, surface temperatures were $13.9^{\circ}C\;and\;14.2^{\circ}C$ at stations of A1 and A8, and salinity was 34.5psu at both stations. Zooplankton community was dominated by copepods which comprised 61% (September) and 60% (May) of total numerical abundance, respectively. The next dominant groups were appendicularians (11%) and chaetognaths (9%) in September 1999, and other crustaceans (27%) and appendicularians (4%) in May 2000. The 15.7% (September) and 23.2% (May) of copepods were in the juvenile stage of copepodites. The most dominant copepods were Oncaea media (10.4%) and Clausocalanus sp. (8.2%) which preferred warm water in September. In contrast, cold-water copepods such as Pseudocalanus minutus (9.4%) and Metridia pacifica (8.0%) were dominant in May. The results of cluster analysis based on Bray-Curtis index showed that zooplankton community were classified into two groups which represented different water mass. The average abundance of zooplankton in September was 2.1 times higher than that in May, and species number of them in September outnumbered that in May by 29 species. Zooplankton community varied in associated with a characteristic of warm waters which affected marine ecosystem differently in the study area depending on seasons.

• Journal of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.300-305
• /
• 1981

The soy bean oil cakes and perillar oil cakes are phosphorylated and sulfonated to be used as ion exchangers. There 40-60mesh cations exchanges have bean tested on the capacity of ion exchange, the adsorption and distribution coefficients of several metal ions in various concentrations of binary solution mixture, hydrochloric acid and alcohol. From there experiments, the following results are concluded. The ion exchange capacity of ion exchangers are higher than 4 meq/g. The adsorption of metal ions on ion exchangers are increased generally as pH is increased, especially Co(II) on sulfonated soy bean oil cake. The distribution coefficients of various metal ions are decreased as the number of branches of carbon and hydroxyl groups are increased. There show that the stereo-isomerism of alkyl group or attraction of ligand have influenced upon various metal ions. Consequently it is deduced that there ion exchanges from soy bean oil cake and perillar oil cake resemble in properties to current ion exchangers.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.2
• /
• pp.38-45
• /
• 1997

In this paper, the three-dimensional stress effect of thermal oxide is simulated. We developed a three-dimensional finite element numerical simulator including three-dimensional adaptive mesh generator that is able to refine and eliminate nearby moving boundary of oxide, and oxidation solver with stress model. To investigate the behavior of thermal oxidation the simulations of thermal oxidation for island and hole structures are carried out assuming silicon wafer of <100> direction, temperature of $1000^{\circ}C$, oxidation time of 60min, wet ambient, initial oxide thickness of $300\AA$, and nitride thickness of $2, 000\AA$. The main effect of deformation at the corner area of oxide is due to distribution of oxidant, but the deformation of oxide is affected by the stressin theoxide. In the island structure which is the structure mostly covered with nitride and a coner is opended to oxidation, oxidation is reduced at the coner by compressive stress. In the hole structure which is the structure mostly opedned to oxide and a coner is convered with nitride, however, oxidation is increased at the coner by tensile stress.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.3
• /
• pp.215-222
• /
• 2014

Paralarvae of the common squid, Todarodes pacificus Steenstrup were sampled with the bongo net (diameter: 60 cm, mesh: $333{\mu}m$) by using oblique tow method with the oceanographic research vessel (Tamgu 12) at 21 stations along the southwestern coastal waters of the East Sea in August and September, 2013. Paralarvae were collected 16 ind./$10m^3$ in August and 7 ind./$10m^3$ in September at approximately, and bottom depth was from 70 m to 500 m. Mantle length of paralarvae was from 1.7 to 6.0 mm. Paralavae were distributed mainly in offshore stations in August and near by Cape Janggi in September. Optimum embryo survival temperature ($18-24^{\circ}C$) was formed shallower than 35 m depth for almost stations where paralarvae were existed, and survival temperature ($15-24^{\circ}C$) for embryo stage was located shallower than 75 m.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.383-390
• /
• 2010

This paper describes multiparticle finite element model (MPFEM)-based powder compaction simulations performed to demonstrate the densification of compacted aluminum powders. A 2D MPFEM was used to explore the densification of a collection of aluminum particles with different average particle sizes under various ram speeds. Individual particles are discretized using a finite element mesh for a detailed description of contact mechanics. Porous aluminum powders with average particle sizes of $20\;{\mu}m$ and $3\;{\mu}m$ were compressed uniaxially at ram speeds of 5, 15, 30, and 60 mm/min by using an MTS servo-hydraulic tester. The slow ram speed was of great advantage to powder densification in low compaction force due to sufficient particle rearrangement. Owing to a decrease in the average particle size of aluminum, the compaction force increased.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2020

PURPOSE. This study evaluated the influence of prosthesis weight and number of implants on the bone tissue microstrain. MATERIALS AND METHODS. Fifteen (15) fixed full-arch implant-supported prosthesis designs were created using a modeling software with different numbers of implants (4, 6, or 8) and prosthesis weights (10, 15, 20, 40, or 60 g). Each solid was imported to the computer aided engineering software and tetrahedral elements formed the mesh. The material properties were assigned to each solid with isotropic and homogeneous behavior. The friction coefficient was set as 0.3 between all the metallic interfaces, 0.65 for the cortical bone-implant interface, and 0.77 for the cancellous bone-implant interface. The standard earth gravity was defined along the Z-axis and the bone was fixed. The resulting equivalent strain was assumed as failure criteria. RESULTS. The prosthesis weight was related to the bone strain. The more implants installed, the less the amount of strain generated in the bone. The most critical situation was the use of a 60 g prosthesis supported by 4 implants with the largest calculated magnitude of 39.9 mm/mm, thereby suggesting that there was no group able to induce bone remodeling simply due to the prosthesis weight. CONCLUSION. Heavier prostheses under the effect of gravity force are related to more strain being generated around the implants. Installing more implants to support the prosthesis enables attenuating the effects observed in the bone. The simulated prostheses were not able to generate harmful values of peri-implant bone strain.

• Applied Biological Chemistry
• /
• v.28 no.4
• /
• pp.233-238
• /
• 1985

Glucoamylases catalyze a stepwise hydrolysis of starch with the production of glucose. In order to make an efficient conversion of starch into glucose, glucoamylases prepared from Rhizopus spp. (Sigma Co.) were attached to a porous glass and immobilized by glutaraldehyde-induced crosslinking. The porous glass used in this study was $ZrO_2$ coated, $40{\sim}80$ mesh, 550 A pore diameter. Using the forgoing glass, we could couple as much as 50mg of protein per gram of carrier. Substrate for the glucoamylase was an enzyrne-modified thin-toiling 30% cornstarch solution used where greater solubility and low viscosity are desired. Immobilized glucoamylase had an optimum pH 7.0 to the alkaline side of soluble enzyme. Km values of immobilized and soluble enzyme were 1.04 mM and 1.25mM, respectively. The thermal stability of glucoamylase was increased by immobilization and the immobilized enzyme showed an optimum temperature at $40{\sim}60^{\circ}C$. The continuous conversion of cornstarch to glucose by use of immobilized glucoamylase resulted in the production of a more than 90 DE product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.90-90
• /
• 2000

이온빔을 이용한 리소그래피의 경우 미크론 이하의 미세구조를 형성할 수 있는 유용한 수단으로서 방사광 X-선과 함께 주목을 받고 있으며, 이와 같은 미세구조 제작은 MEMS (Micro Electro-Mechanical System) 개발에 있어서 매우 중요하다. 그러나 이온빔을 이용한 리소그래피에 대한 연구가 많이 이루어져 있지 않은 상태이다. MeV급 양정사 빔을 이용한 리소그래피의 가능성을 확인하기 위하여 기본적인 실험을 수행하였으며, 최적 이온빔 조사 조건 및 최적 현상 조건을 도출하였다. Resist로는 PMMA를 사용하였으며, 1.8 MeV 양성자 빔을 사용하여 50$\mu\textrm{m}$ 깊이의 구조물을 만들었다. 1.8MeV 양성자 빔의 조사선량이 7x1013ions/cm2 이상이 되면 PMMA 내부에 기포가 형성되므로 적정 조사선량을 4x1013 ions/cm2으로 결정하였다. 또한 선량을 4x1013ions/cm2 으로 고정하고 선량률을 변화시켜주면 선량률이 8x1011ions/cm2S 일 때부터 시료에 기포나 터짐 현상 등의 문제가 발생하였으며 5x1010~~1x1010ions/cm2s 의 선량률이 조사시간, 결함측면에서 가장 적합한 영역임을 알 수 있었다. 현상제로는 20% morpholine, 5% etanolamine 60% diethylenglykol-monobutylether, 15% 증류수를 혼합하여 사용하였다. 현상 온도를 30~5$0^{\circ}C$로 변화시켜서 현상을 한 결과, 4$0^{\circ}C$에서 현상 소요시간은 1시간 이내이며 SEM으로 관찰된 표면의 상태도 제일 양호한 결과를 보였다. 82 mesh 밀도, 선굵기 60$\mu\textrm{m}$, 크기 20x20 mm인 백금 망을 마스크로 사용하여 실제 3차원 미세구조를 제작하여 보았다. 그림 1에서 제작된 구조물의 SEM 사진을 보여주었으며, 식각된 면의 조도가 매우 뛰어나며 모서리의 직각성도 우수함을 확인할 수 있다. 이와 같이 도출된 시험 조건을 기초로 하여 리소그래피 후에 전기 도금을 이용한 금속 몰드 제작 및 이온빔 리소그래피 장점을 최대한 살릴수 있는 미세구조 제작에 대한 연구를 계속 추진할 계획이다.

• Journal of Food Hygiene and Safety
• /
• v.3 no.4
• /
• pp.217-223
• /
• 1988

For the Effective utilization of the fish resources in coastal regions, investigations on preparation of powdered dried arkshell instant soup., quality stability of the products during storage and utilization as a food material were carried out with arkshell, Anadara broughtonii. Three kinds of powdered instant soup were prespared as 0% table salt(A), 5% table salt (B), 15% table salt(C) and packed with vacuum in laminated film bag. (polyester/nylon: 85${mu}ell$/15${mu}ell$, 18$\times$27cm) Their processing conditions and quality stability during storage at room temperature for 90 days were examined. Powdered instant soup was made by washing raw arkshell to remove visceral, clay, sand and blood, hot air drying(60$\pm$1$^{\circ}C$, 20 hrs) after draining and pulverizing dried arkshell to 35 mesh. Powdered instant soup was made by adding 2% sugar 0% table salt (5% and 15% table salt), 10.5% monosodium glutamate, 0.3% black pepper and 0.3% garlic powder to the pulverized dried arkshell. The condition of moisture and water activity of the products were 5.9-6.9% and 0.42-0.43, respectively. The moisture content s , water activity and pH of the products were showed little change and volatile basic nitrogen of them increased slightly during storage. Thiobarbituric acid value increased up to 60 days of storage and then decreased slightly. In solubility, powdered instant soup were showed no remarkable difference comparing with goods on the market. The color value of th products were showed little change during storage, In sensory evaluation, product B were scored slightly higher, in most cased, in flaver, color. taste and overall acceptability comparing with product A or product C during storage. Judiging form the sensory evaluation, powdered instant soup of 5% table salt (B) were the most desirable, and the quality of the products was stable for 90 days at 20$\pm$3$^{\circ}C$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.58-66
• /
• 2019

Paralarvae of the common squid, Todarodes pacificus, were sampled with the bongo net (diameter: 60 cm, mesh: $333{\mu}m$) with a research vessel (Tamgu 20) at 18 stations along the coastal waters of the Yellow Sea in spring and autumn from 2013 to 2015. Over this period, 4 Paralarvae were collected. Paralarval density was $0.1inds./1,000m^3$ and $0.2inds./1,000m^3$ in autumn 2014 and $0.1inds./1,000m^3$ and $0.2inds./1,000m^3$ in autumn 2015. The range of mantle length for paralarvae was from 1.5 to 8.3 mm. Survival temperature ($15-24^{\circ}C$) for embryo stage and paralarvae was found in locations shallower than 56 m of depth at stations which were sampled for paralarvae.