• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(D)
• /
• pp.179-182
• /
• 2011

노트북컴퓨터 및 스마트폰을 비롯한 무선랜을 사용하는 이동기기들의 폭발적인 보급에 따라 과도한 무선 트래픽을 처리하기 위한 기술개발이 절실하다. 본 논문에서는 MIM기능이 구현된 무선인터페이스를 가지는 노드들의 적절한 배치를 통해 시스템성능을 향상시키는 방법에 대해서 소개한다. 두 노드간의 거리에 기반한 간단한 MIM캡쳐 확률 모델을 바탕으로 무선 메시노드를 배치하면 동시전송이 가능해져서 기존의 IEEE802.11 DCF를 기반으로 동작하는 무선메시망에 비해 데이터 처리율이 크게 향상될 수 있다. 우리는 시물레이션을 통한 성능검증을 통해 MIM캡쳐를 활용하는 무선메시망 배치구조가 DCF에 기초해서 동작하는 망에 비해서 약 60% 정도의 처리량 향상이 있는 것을 확인하였다.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.54-60
• /
• 2010

The automotive air conditioning hose is used for connecting the components of air conditioner in a vehicle. The hose is usually manufactured by the swaging process to connect the rubber hose with the metal fitting at the end of the hose. The swaging process leads to various stress and strain configurations in the hose, which give a critical effect on the hose performance. In this paper, the deformation characteristics of an air-conditioning hose during the swaging process were analyzed using the nonlinear finite element method. Especially the rubber layers, which are contacted with the metal fittings, were divided with finer mesh density than the reinforcement braids to increase the solution accuracy. The material properties were obtained from experimental data, and the contact conditions were used in consideration of the real manufacturing process.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.53-60
• /
• 2001

Meshfree methods have been attracting issue as computational methods during past a few years. Nowadays, various meshfree methods such as EFGM, RKPM h-p cloud method and etc. were developed and applied in engineering problems. But, most of them were not truly meshless method because background mesh of cell was required for the spatial integration of a weak form. A nodal integration is required for truly meshless methods but it is known that this method gives a little unstable and incorrect solutions. In this paper, an improvement scheme of the existed nodal integration which the weak form can be simply integrated without any stabilization term is proposed. Numerical tests show that the proposed method is more convenient and gives more correct solutions than the previous method.

• Ocean and Polar Research
• /
• 제40권1호
• /
• pp.23-35
• /
• 2018

A small cyclopoid copepod M. subtilis (Giesbrecht, 1893 ["1892"]) belonging to the genus Monothula $B{\ddot{o}}ttger-Schnack$ and Huys, 2001 was collected by using $60{\mu}m$ mesh net and firstly recorded in the epipelagic layer of the equatorial Pacific Ocean. We redescribed its morphological characteristics for both female and male, comparing with those of previous studies. Specimens of M. subtilis from the equatorial Pacific Ocean differ from those previously reported by others in terms of the length of the seta G on antenna, being much shorter than setae E and F; in the distal spine on the swimming leg 4, being longer than the length of the third segment on P4. The outer spine of the P3 enp-3 in male is slightly over the tip of conical process. The spine lengths of the distal endopods of P2-P4 for both sexes showed variations among individuals, and the proportions of spine lengths in female are higher than those in male.

• 대한화학회지
• /
• 제6권1호
• /
• pp.54-60
• /
• 1962

The water gas shift conversion catalyst prepared by the American Cyanamide Co. was subjected to fluidization in a 2-in. Pyrex glass tube to obtain the basic fluidization characteristic data. The size of the catalyst charged ranged from 70 to 120 meshes and it was supported on a single layer 300-mesh wire gauze through which the fluidizing medium, the air, was passed. Following are some data and facts found by the authors: (1) The catalyst particles were porous, and their surfaces were trough and irregular. (2) The average effective particle density and the average shape factor of these particles were 152.2 lb/$ft^3$ and 0.865 respectively. (3) As the particle diameter of the catalyst increased, the minimum fluid voidage of the bed decreased slightly. (4) Just before the incipient fluidization, pressure drop suddenly fell and the bed expanded simultaneously. (5) After fluidization set in, the expansion characteristics of the catalyst bed were similar to those of sand and glass beads except intense bubbling in the catalyst bed.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.371-398
• /
• 2017

Calm water wave resistance plays a very important role in ship hull design. Numerical methods are meaningful for this reason. In this study, two prevailing methods, the Neumann-Kelvin and the Rankine source method, were implemented and compared. The Neumann-Kelvin method assumes linearized free surface boundary condition and only needs to mesh the hull surface. The Rankine source method considers nonlinear free surface boundary condition and meshes both the ship hull surface and free surface. Both methods were implemented and the wave resistance of a Wigley III and three Series 60(Cb=0.6, 0.7, 0.8) hulls were analyzed. The results were compared with experimental results and the merits of both numerical techniques were quantified. Based on the results, it is concluded that the Rankine source method is more accurate in the calculation of the wave-making resistance. Using the Neumann-Kelvin method, it is found to be easier to model the hull and can be used for slender ships to solve problems like wave current coupling calculation.

• 대한화학회지
• /
• 제11권1호
• /
• pp.28-32
• /
• 1967

The direct acid leaching of domestic Marmatite concentrate at elevated temperatures and pressures was investigated. Almost 100 percent of zinc was extracted from the concentrate liberating free sulfur in 4 hours at $100^{\circ}C$ when the oxygen partial pressure was 5 atm. in sulfuric acid solution. By applying the Arrhenius equation to leach reaction in the range of $60^{circ}$ to $100^{\circ}C$ at the same oxygen partial pressure, 15.7 kcal per mole of activation energy was calculated. At the initial stage of leaching, the rate of reaction increased linearly by increasing temperature and pressure. The concentration of sulfuric acid gave minor effect to leaching velocity in the range of 5 to 20 percent. The particle size should be under 270 mesh for 100 percent extraction of zinc.

• Journal of Ginseng Research
• /
• 제4권1호
• /
• pp.96-103
• /
• 1980

The effect of granule size of dried red ginseng extract on physical characteristics on tablet such as hardness, color, yield and disintegration time was studied. A moisture proofing agent was found to be necessary to form granules without serious absorption of moisture. The result showed that decrease in particle size resulted increase of values in weight, hardness and disintegration time. The granule size of 60∼80 mesh was found to be optimum for proper color uniformity and other physical characteristics of tables.

• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.90-94
• /
• 2013

This study represents the recent laboratory results from cathodic protection (CP) system with the use of sacrificial anodes at different environmental conditions (temperature of $10^{\circ}C$ and $40^{\circ}C$). Specimens were slab type with a dimension of $500mm{\times}50mm{\times}100mm$, and concrete cover thickness were 25mm. Zinc mesh and/or bulk type anodes were installed at the center of specimen to confirm the distance that CP system has influences on the specimen to distribute uniform CP current to rebar. Two different kinds of temperature condition were applied to verify the effect of temperature. Experiments were conducted for 60 days, and the distribution of potential and current that supplied from anode to rebar was measured. From the results, CP potential was varied with time, and temperature played an important role in CP potential variations. Current was also changed with time, and current distribution could be improved by installing additional bulk type anode.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.611-612
• /
• 2006

In a manufacturing technique of the sintered filter, pressureless sintering method has good permeability, it is not need the binder and lubricant used on compacting process, so it has little contamination and it is easy to control the pore size and shape but the mechanical strength is low relatively and it is difficult that parts of complicate form are manufactured. In the case of manufacturing the filter by press and sintering method, in order to be satisfactory characteristic of un-pressed filter, in this study sintered metal filter fabricated by using 30-40mesh stainless steel 316L powder and additive agents. Porosity and structure of pores, permeability and mechanical strength of the sintered filter were investigated with the variation sintering conditions. Porosity was nearly constant about $60{\sim}70%$, density, permeability and mechanical strength were changed markedly with quantity of additive materials and sintering conditions.