• Korean Journal of Medicinal Crop Science
• /
• v.23 no.6
• /
• pp.468-472
• /
• 2015

Background : Chinese matrimony vine (Lycium chinense Mill.) is a deciduous shrub belonging to the Solanaceae. The leaves are used as an alternative raw material replacing dried fruits associated with high production costs in many industires. The aim of this experiment was to determine the effect of drying temperature on the leaves used in the manufacture of functional products. Methods and Results : The leaves of Chinese matrimony vine were harvested when the plant height reached 60 - 70 cm in the spring and treated at four different temperatures ($40^{\circ}C$, $50^{\circ}C$, $60^{\circ}C$ and $70^{\circ}C$). The time to reach the desiccation state of 20% was 63 h at $40^{\circ}C$, 37 h at $50^{\circ}C$, 17 h at $60^{\circ}C$ and 11 h at $70^{\circ}C$. The drying rate per hour was 1.28% at $40^{\circ}C$, 2.25% at $50^{\circ}C$, 4.94% at $60^{\circ}C$ and 7.60% at $70^{\circ}C$. No significant difference were observed in ash, crude fat, polyphenol or rutin content of treated samples. Crude protein and betaine content decreased with higher dry temperatures. Nitrogen free extract of the treated samples increased with higher drying temperatures. Conclusions : Taking into consideration drying time, drying rate, color value, energy consumption and functional ingredients is advantageous to dry the leaves of the Chinese matrimony vine at $60^{\circ}C$ using a hot air agricultural dryer.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.657-665
• /
• 2013

The purpose of this study is the basic research of self-compacting concrete using Alkali-Activated Slag (AAS) binder in order to emphasize the durability of structures and facilitate casting the fresh concrete in field. The AAS binder emitted low carbon dioxide ($CO_2$) is eco friendly material of new concept because AAS products not only emit little $CO_2$ during production but also reuse the industrial by-products such as ground granulated blast-furnace slag (GGBS) of the steel mill. Until now, almost of domestic and foreign research are using Ordinary Portland Cement (OPC) for self-compacting concrete, and also, nonexistent research about AAS. The self-compacting concrete must get the performance of flowability, segregation resistance, filling and passing ability. Nine concrete mixes were prepared with the main parameter of unit amount of binder (400, 500, 600 $kg/m^3$) and 3 types of water-binder (W/B) ratio. The results of test were that fresh concretes were satisfied with flowability, segregation resistance, and filling ability of JSCE. But the passing ability was not meet the criteria of EFNARC because of higher viscosity of AAS paste than OPC. This high viscosity of AAS paste enables the manufacturing of self compacting concrete, segregation of which does not occur without the using of viscosity agent. It is necessary that the development of high fluidity AAS binders of higher strength and the study of better passing ability of AAS concrete mixes in order to use self compacting AAS concrete in field.

• Journal of Plant Biotechnology
• /
• v.29 no.2
• /
• pp.129-134
• /
• 2002

194 plantlets regenerated from leaf explants of boxthorn 'Cheonyang' were cultivated to investigate their morphological characteristics in the field for 2 years. Based on the morphology of leaves, 66.1% of them had elliptical type leaf, the same as that of mother plants, while 22.2% in oval type, 7.2% in obovate type, 2.6% in long-obvate type and 2.1% in lanceolate type. They were classified to 4 groups; group A was selected with both high fruit size and fruit yield, group B with only high fruit size, group C with larger or thicken leaf, and group D with multiple brenches. In comparision of production efficiency between the selected groups and mother plants, group A (99741, 99781, 99854, 99870 and 99886) were longer (2.1 to 2.7 mm) in length of fruits and higher in fruit production (15 to 30%) as compared to mother plants. Croup D (99797 and 99892) was higher in leaf production (7.2%) as compared to boxthorn 'CL1-48', which is the highest in leaf production among boxthorn veriaties.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.513-522
• /
• 2013

The ODSCC detected in the TSP position of Ulchin 3&4 SGs are typical ODSCC of Alloy 600MA tubes. The causative chemical environment is formed by concentration of impurities inside the occluded region formed by the tube surface, egg crate strips, and sludge deposit there. Most cracks are detected at or near the line contacts between the tube surface and the egg crate strips. The region of dense crack population, as defined as between $4^{th}$ and $9^{th}$ TSPs, and near the center of hot leg hemisphere plane, coincided well with the region of preferential sludge deposition as defined by thermal hydraulics calculation using SGAP computer code. The cracks developed homogeneously in a wide range of SGs, so that the number of cracks detected each outage increased very rapidly since the first detection in the $8^{th}$ refueling outage. The root cause assessment focused on investigation of the difference in microstructure and manufacturing residual stress in order to reveal the cause of different susceptibilities to ODSCC among identical six units. The manufacturing residual stress as measured by XRD on OD surface and by split tube method indicated that the high residual stress of Alloy 600MA tube played a critical role in developing ODSCC. The level of residual stress showed substantial variations among the six units depending on details of straightening and OD grinding processes. Youngwang 3&4 tubes are less susceptible to ODSCC than U3 and U4 tubes because semi-continuous coarse chromium carbides are formed along the grain boundary of Y3&4 tubes, while there are finer less continuous chromium carbides in U3 and U4. The different carbide morphology is caused by the difference in cooling rate after mill anneal. There is a possibility that high chromium content in the Y3&4 tubes, still within the allowable range of Alloy 600, has made some contribution to the improved resistance to ODSCC. It is anticipated that ODSCC in Y5&6 SGs will be retarded more considerably than U3 SGs since the manufacturing residual stress in Y5&6 tubes is substantially lower than in U3 tubes, while the microstructure is similar with each other.

• Journal of Bio-Environment Control
• /
• v.15 no.1
• /
• pp.69-77
• /
• 2006

The experiment was conducted to investigate the nutrition absorption pattern in the growth stage and develope the optimal nutrient solution hydroponically grown the cherry tomato 'Koko' in closed substrate culture system with the nutrient solution of National Horticultural Research Station in Japan into 1/2S, 1S, and 2S. When plant was grown in 1/2S, the growth and yield were high and the pH and EC in the root zone were stable. Suitable composition of nutrient solution for cherry tomato was $NO_3-N\;6.8,\;PO_4-P\;2.7,\;K 3.2,\;Ca\;3.6\;and\;Mg\;1.1\;me\;L^{-1}$ in the early growth stage, $NO_3-N\;7.3,\;PO_4-P\;2.2,\;K\;3.7,\;Ca\;3.6;and\;Mg\;1.1\;me\;L^{-1}$ in the late growth stage by calculating a rate of nutrient and water uptake. To estimate the suitability for the nutrient solution in a development of cherry tomato developed by Wongkwang university in Korea (WU), plant was grown in perlite substrate supplied with different solution and strengths(S) by research station for greenhouse vegetable and floriculture in the Netherlands (Proefstation voor tuinbouw onder glas th Mssldwijk; PTG) of 1/2S, 1S, and 2S, respectively. The growth was good at the PTG and WU 2S in the early stage and the PTG of 1S and WU of 1S and 2S in the late stage. The highest yield of cherry tomato obtained in the WU of 2S. pH and EC in root zone of WU of 2S were stable during the early and late growth stage. Therefore when cherry tomato plant was grown in WU of 2S of EC $1.6{\sim}2.0\;dS\;m^{-1}$in the nutrient solution, not only stable growth and yield but also fertilizer reduction can be obtained than that of PTG.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.143-150
• /
• 1995

In order to find a way to utilize paper mill sludge, its composting was conducted with anaerobic waste of kraft paper sludge, raw kraft paper sludge, and CMC sludge(CMC : Sodium Carboxymethylcellulose) under aerobic condition at $50^{\circ}C$. It took 3 days for initial fermentation with anaerobic waste and CMC sludge, and six days with raw kraft paper sludge. Each compost was applied to radish(Rhaphanus Stativus L.), and absorption rate of staple nutrients increased 6.7~9.3 times higher in N, 17~21 times in P and 2~3 times in K than control at the harvesting stage. Also, organic matter contents were increased 1.5~2.3 times 4.5~5.3 times in CEC compared to control soil.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.629-635
• /
• 2001

To improve the ductility of $A1_3Hf$ intermetallics, which are the potential high temperature structural materials, the mechanical alloying behavior. the effect of Cu addition on the $Ll_2$ phase formation and the behavior of vacuum hot-pressed consolidation were investigated. During the mechanical alloying by SPEX mill, the $Ll_2 A1_3Hf$ intermetallics with the grain size of 7~8nm was formed after 6 hours of milling in Al-25at.%Hf system. The $Ll_2$ Phase of Al_3Hf$ intermetallics with the addition of 12.5at.%Cu, similar to that of the binary Al-25at.% Hf, was formed, but the milling time necessary for the formationof the $Ll_2$ phase was delayed form 6 hours to 10 hours. The lattice parameter of ternary $Ll_2(Al+Cu)_3Hf$ intermetallics decreased with the increase of Cu content. The onset temperature of $Ll_2$ to $D0_{23}$ phase in $Al_3Hf$ intermetallics was around 38$0^{\circ}C$, the temperature upon completion varied from 48$0^{\circ}C$ to 5$50^{\circ}C$ as the annealing time. The onset temperature of $Ll_2$ to $D0_{23}$ phase transformation in $(Al+ Cu)_3Hf$ intermetallics increased with the amount of Cu and the highest onset temperature of $700^{\circ}C$ was achieved by the Cu addition of 10at.%. The relative density increased from 89% to 90% with the Cu addition of 10at.% in $Al_3Hf$ intermetallics hot-pressed in vacuum under 750MPa at 40$0^{\circ}C$ for 3 hours. The relative density of 92.5% was achieved without the phase transformation and the grain growth as the consolidation temperature increased from 40$0^{\circ}C$ to 50$0^{\circ}C$ in $(Al+Cu)_3Hf$ intermetallics hot-pressed in vacuum under 750MPa for 3 hours.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.92-100
• /
• 2005

This study was conducted to find suitable methods for screening organic resources useful for compost. Twenty-seven industrial and domestic sludges were collected from various cities and industrial areas. Contents of organic matters in the sludges were in the range of 79.3-98.0%, and the contents were much higher than the regulation level (60%) for raw materials of compost. Contents of total nitrogen were in the range of 0.8-2.6%. Contents of Fe and Al were very high. Content of HEM was highest in textile sludge ($257mg\;kg^{-1}$) and the contents in the others were in the range of $12.6-90.3mg\;kg^{-1}$. Content of PAHs was lowest in food sludge ($739.1{\mu}g\;kg^{-1}$ and pulp-mill sludge had the highest PAHs content ($3461.8{\mu}g\;kg^{-1}$). $Microtox^{(R)}$ $EC_{50}$ values were higher in the sludges which were classified as a possible material in composting after analysis and investigation. Lettuce root elongation and $EC_{50}$ values were relatively lower in pulp-mill sludge, sewage sludge 3 (Large city), food sludge and leather sludge. Therefore, mineral nutrients, heavy metals, organic compounds (HEM, PAHs, PCBs), and bioassay ($Microtox^{(R)}$ $EC_{50}$, Relative root elongation test) are recommended to be included in the screening system of raw material of compost in addition to the current regulation with organic matter and 8 heavy metals.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.151-158
• /
• 1997

Tomato (lycopersicon esculentum Mill.‘Sunroad’) seedlings grafted onto the four different rootstocks, ‘Anchor-T’, ‘Kagemushia’, ‘Joint’ and ‘Vulcan’, and fed with different amount of nitrogen were investigated for their susceptibility to the root rot Fusarium wilt (Fusarium oxysporum Schl. f. sp. lycopersici Snyder et Hansen, race J$_3$) disease, plant growth, and fruit quality. The flowering of the first flower cluster was promoted in grafted plants (GP) as compared to non-grafted (NG) ones. The plant height was increased by the grafting, and the growth and stem diameter were enhanced with increased nitrogen levels. Grafted plants were little affected by the Fusarium wilt disease except ‘Anchor-T’rootstock (64.7％ infection). The rate of malformed, underdeveloped, and gray-mold infected fruits were reduced in the grafted plants regardless of the rootstocks. Soluble solid content, sugars, ascorbic acids and organic acids did not show any difference between grafted and non grafted plants, but ascorbic acid tends to be reduced in the high nitrogen treatment. Content of N, Ca and Mg in leaves were greatly increased in the GP grown with high nitrogen level (30kg.㏊$^{-1}$ ).

• Korean Journal of Metals and Materials
• /
• v.46 no.6
• /
• pp.351-356
• /
• 2008

Thermally sprayed tungsten carbide-based powder coatings are being widely used for a variety of wear resistance applications. The coating deposited by high velocity processes such as high velocity oxy-fuel (HVOF) thermal spraying is known to provide improved wear resistant property. In this study, optimal coating process (OCP) is obtained by the study of coating properties such as surface hardness, porosity, surface roughness and microstructure of 9 coatings prepared by Taguchi program for 3 levels of four spray parameters. The Friction and wear behaviors of HVOF WC-CoCr coating prepared by OCP, electrolytic hard chrome (EHC) plating and Inconel718 (In718) are investigated by reciprocating sliding wear test at $25^{\circ}C$, $450^{\circ}C$. Friction coefficients (FC) of all of the 3 samples are decreased as increasing sliding surface temperature from $25^{\circ}C$ to $450^{\circ}C$. FC of WC-CoCr decreases as increasing the surface temperature from $0.33{\pm}0.02$ at $25^{\circ}C$ to $0.26{\pm}0.02$ at $450^{\circ}C$, showing the lowest FC among the 3 samples. Wear trace (WT) and wear depth (WD) of WC-CoCr are smaller than those of EHC and In718 both at $25^{\circ}C$ and $450^{\circ}C$. These show that WC-CoCr is highly recommendable for protective coating on In718 and other metal components.