• Safety and Health at Work
• /
• v.8 no.1
• /
• pp.99-104
• /
• 2017

Background: Workers laboring in steel industries in tropical settings with high ambient temperatures are subjected to thermally stressful environments that can create well-known risks of heat-related illnesses and limit workers' productivity. Methods: A cross-sectional study undertaken in a steel industry in a city nicknamed "Steel City" in Southern India assessed thermal stress by wet bulb globe temperature (WBGT) and level of dehydration from urine color and urine specific gravity. A structured questionnaire captured self-reported heat-related health symptoms of workers. Results: Some 90% WBGT measurements were higher than recommended threshold limit values ($27.2-41.7^{\circ}C$) for heavy and moderate workloads and radiational heat from processes were very high in blooming-mill/coke-oven ($67.6^{\circ}C$ globe temperature). Widespread heat-related health concerns were prevalent among workers, including excessive sweating, fatigue, and tiredness reported by 50% workers. Productivity loss was significantly reported high in workers with direct heat exposures compared to those with indirect heat exposures ($x^2=26.1258$, degrees of freedom = 1, p < 0.001). Change in urine color was 7.4 times higher among workers exposed to WBGTs above threshold limit values (TLVs). Conclusion: Preliminary evidence shows that high heat exposures and heavy workload adversely affect the workers' health and reduce their work capacities. Health and productivity risks in developing tropical country work settings can be further aggravated by the predicted temperature rise due to climate change, without appropriate interventions. Apart from industries enhancing welfare facilities and designing control interventions, further physiological studies with a seasonal approach and interventional studies are needed to strengthen evidence for developing comprehensive policies to protect workers employed in high heat industries.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.635-639
• /
• 1995

Digestibility trial was performed with carps weighing 200 g/fish. Fecal collection was made over 7 days using a settling column. The water temperature was in the range of 27 to $30{^{\circ}C}$ during whole experimental period. Fishes were fed 5 diets (Control, $F_{24}S_{13}$, $F_{16}S_{27}$, $F_8S_{40}$ and $F_0S_{56}$) containing both 32%, 24%, 16%, 8% and 0% of fish meal (F) and 0%, 13%, 27%, 40% and 56% of roasted full-fat soybean (S), respectively. Water volume in each recirculated rearing tank was maintained at 130 l with flow rate of 10-12 l/min. Apparent digestibility coefficients (ADCs) of dry matter, protein, lipid, total carbohydrates and energy in diets showed a reduction (p < 0.05) with the increase of dietary full-fat soybean level, although there was no difference in the ADCs between Control and $F_{24}S_{13}$ (p > 0.05). The ADCs of ash, Ca and P in diets significantly increased with the increase of dietary full-fat soybean level, suggesting the high availability of phosphorus in monocalcium phosphate.

• Journal of Environmental Science International
• /
• v.19 no.4
• /
• pp.437-446
• /
• 2010

The pressure drop through pulse air jet-type bag filter is one of the most important factors on the operating cost of bagfilter houses. In this study, the pilot-scale pulse air jet-type bag filter with about 6 m2 filtration area was designed and tested for investigating the effects of the four operating conditions on the total pressure drop, using the coke dust collected from a steel mill factory. When the face velocity is higher than 2 m/min, it is not applicable to on-spot due to the increase of power expenses resulting from a high-pressure drop, and thus, 1.5 m/min is considered to be reasonable. The regression analysis results show that the degree of effects of independent parameters is a order of face velocity > concentration > time > pressure. The results of SPSS answer tree analysis also reveal that the operation time affects the pressure drop greatly in case of 1 m/min of face velocity, while the inlet concentration affects the pressure drop in case of face velocity more than 1.5 m/min.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.197-204
• /
• 2007

Ceramic pigments were developed by using 4 kinds of Brass scraps. Each Brass scraps were mixed with same weight-ratio of Husk ash, and fine-ground by Rotate ring mill(RRG-120, Armstech industrial. co. Ltd, Korea) after firing at $900^{\circ}C$, $1000^{\circ}C$ and $1100^{\circ}C$. As a result, analysis of particle size of synthetic pigments by particle size analyser, they are $3{\mu}m$ as average. The resulting pigments were characterized by using XRD, FT-IR, SEM Structure of the crystals are Zn2SiO4,, and ZnO, Cu2O, CuO, and cristobalite are existed and particles' shape are plate or needle. As a result of analysis of chemical composition by XRF, synthetic pigments have high SiO2 and CuO content and have SnO2, ZnO and NiO, too. 1wt%, 3wt% and 5wt% pigments were added in each lime glaze, lime-barium glaze and lime-magnesia glaze, and fired at oxidation and reducing atmosphere to figure hue in glazes out. As a result of analysis of color, chroma and brightness by UV, colors of glazes fired at oxidation atmosphere turned into green from sky blue, and colors of glazes fired at reducing atmosphere turned into pink and red.

• Korean Journal of Materials Research
• /
• v.26 no.7
• /
• pp.388-392
• /
• 2016

A cold roll-bonding process was applied to fabricate an AA1050/AA6061/AA1050 laminate complex sheet. Two AA1050 and one AA6061 sheets of 2 mm thickness, 40 mm width and 300 mm length were stacked up after surface treatment that included degreasing and wire brushing; material was then reduced to a thickness of 3 mm by one-pass cold rolling. The laminate sheet bonded by the rolling was further reduced to 1.2 mm in thickness by conventional rolling. The rolling was performed at ambient temperature without lubricant using a 2-high mill with a roll diameter of 210 mm. The rolling speed was 5.0 m/sec. The AA1050/AA6061/AA1050 laminate complex sheet fabricated by roll bonding was then hardened by natural aging T4) and artificial aging (T6) treatments. The microstructures of the as-roll bonded and the age hardened Al complex sheets were revealed by optical microscope observation; the mechanical properties were investigated by tensile testing and hardness testing. The strength of the as-roll bonded complex sheet was found to increase by 2.9 times compared to that value of the starting material. In addition, the hardness of the complex sheets increased with cold rolling for AA1050 and age-hardening treatment for AA6061, respectively. After heat treatment, both AA1050 and AA6061 showed typical recrystallization structures in which the grains were equiaxed; however, the grain size was smaller in AA6061 than in AA1050.

• Korean Journal of Microbiology
• /
• v.3 no.1
• /
• pp.1-6
• /
• 1965

Over a period of 1962-64, a transmission-experiment of witchess' broom of jujube tree by stem-grafting was conducted. When stem-grafting of sound scions upon diseased roots or diseased scions upon sound roots were carried out, disease transmission of high rate was witnessed; 99% in the former and, in the latter, 62% of the stocks which saw union by callussing and had new shoots. Even when the diseased scions by stem-grafting or the diseased buds by budding upon sound stock died away, the transmission rate was 21% in stem-grafting and 14% in budding which seems to show that, when tissues of diseased plants and stocks are kept contacted over a certain period, the disease transmission occurs. And when the recovered scions taken from once diseased tree were grafted upon diseased roots, the transmission rate was 100 % and therefore it is presumed that the immunity could not be acquired even under the assumption of complete recovery from the disease. In stem-grafting of the diseased scions upon sound roots, 98% of the scions which were stored in the cellar, overwintered and grafted in spring was diseased, whereas the disease rate of the scions which were cut and grafted in spring was only 33%. It was particularly noteworthy that 90% of the scions in the former case and only 3% in the latter case were diseased as of June 18th approximately 2 months after the actual grafting and then the latter advanced to 33% with the passage of time. It appears that the pathogen in branches and shoots of the diseased trees standing outdoors become inactivated or diminished during winter. Through its symptom, pathological change in tissue, and easy transmission of the disease via stem-grafting, it seems certain that the pathogen of the witches broom disease in jujube tree is a virus.

• New & Renewable Energy
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2022

This study aimed to determine the optimal conditions for fabricating pitch pine (PCP) and Mongolian oak (MOK) pellets using chestnut-shell tea waste (CSW) and castor oil (CSO) as additives. For pellets fabricated using a pilot-scale flat-die pellet mill, all moisture content (MC) was in line with A1 wood pellet standards for residential and small-scale commercial uses designated by the National Institute of Forest Science at the Republic of Korea (NIFOS), regardless of fabricating conditions; the durability of PCP pellets prepared using PCP particles with 10% MC, and CSW addition also satisfied these criteria. The moisture tolerance of PCP pellets improved with combination of 2 wt% CSW and 2-6 wt% CSO. Overall, use of 20 mesh CSW as an additive, PCP with 10% MC, and MOK with 12% MC was found to be optimal. Moreover, using CSO as an additive, high-quality PCP and MOK pellets can be fabricated by adjusting the particles to 12% MC. However, the durability of PCP and MOK pellets prepared using these conditions did not meet the wood pellet standards for residential and small-scale commercial use. Therefore, further research is needed to improve the durability of these pellets.

• The Korean Journal of Physiology
• /
• v.4 no.2
• /
• pp.5-17
• /
• 1970

The effects of Physical exercise, gymnastics and sports on the cardiopulmonary function were studied in the middle and high school toys. The subjects were divided into 4 groups; non-training group and training group in both middle school and high school boys. In the above groups, pulmonary function studies were performed, and blood pressure and the heart rate were also checked to evaluate physical fitness during and immediately after running exercise on the tread-mill, with the speed of 5 MPH and elevation of 9% and 11.25%. The types of sports in the training group were base ball, body building, Taekwondo (Korean style boxing) and hand ball. The results obtained were as followings: 1) In the training group, cardiopulmonary function showed some tendency of the increase comparing to the non-training group. 2) The increase in cardiopulmonary function was observed according to the age became older, but the clear changes on cardiopulmonary function was not observed as the difference of the group between the training and the non-training. 3) The expiratory volume was decreased as the increase of age except 17 years of age for the value of the per kg body weight. 4) In the non-training group, the mean value of oxygen consumption under maximum work load was increased, while those in the training group was decreased. But it may be noted that oxygen consumption for the expiratory volume was increased in the training group, and that the oxygen cost in the training group was .higher than that of the non-training group. 5) The pulse pressure of the high school group during and immediately after running exercise was observed in the higher value comparing with that of the middle school group It was suggested that the changes of the pulse pressure was owing to the method of determination and that to the decrease of diastolic pressure caused by the decrease of peripheral vascular resistance up to critical closing pressure. 6) Any differences of the changes in the heart rate between the training group and non-training group was not observed during and immediately after running exercise. 7) The relative value of the expiratory volume to the heart rate was decreased in the elder age group.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.377-381
• /
• 2005

We tried to extract bone morphogenetic protein (BMP) from the freeze-dried bovine cortical bone (FBCB) for bone graft, which were defatted with chloroform-methanol for 20 days, freeze-dried at $-80^{\circ}C$ for 7 days and sterilized by ethylene oxide gas. Two kg of FBCB were pulverized in a wheel mill to $0.5-2.0mm^3$ cubic in size. The bone particles were demineralized in 0.6N HCI for 10 days at chloroform-methanol$4^{\circ}C$ and defatted with chloroform-methanol for 6 hours at room temperature, which was going to be defatting and demineralized cortical bone (DDM). For extracting BMP, DDM was agitated continuously through 72 hours with magnetic stirrer at $4^{\circ}C$ into 12 times of volume of 6 M guanidine hydrochloride (Gdn-HCl) solution containing proteinase inhibitors to protect BMP such as 2mM N-ethylaleimide, 1mM iodoacetic acid, 1mM phenylmethylsulfonyl fluoride and a sterilizer, 1mM sodium azide. The extraction procedure was repeated for three times. All extracted solution was centrifuged at 10,000 rpm for 30 min and then, the supernatant was dialyzed with 12 times of volume of deionized water at $4^{\circ}C$ for 24-72 hours, which cut off below 6,000-8,000 molecular weight. The dialyzed specimen contained crude-BMP was centrifuged, freeze-dried, and weighted. Through these processing, we could obtained $84.9\%$ as FBCB, $17.8\%$ as DDM and $0.71\%$ as crude-BMP from the wet cortical bone without cancellous bone, marrow and muscles. The crude-BMP were obtained $68.3\%$ from the first extraction, $29.6\%$ from secondary and $2.1\%$ from tertiary, respectively. It was suggested that high yield of crude-BMP migth be explained by three-time repetition of the extraction processing for crude-BMP with Gdn-Hcl sol.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.25-31
• /
• 2012

This study aimed to investigate the effect of night temperature on the productivity, growth, and fruit characteristics of tomatoes and set the optimal night air temperature. Tomatoes (Solanum lycopersicum Mill. cv. Superdoterang and cv. Rapito) were grown at 5, 10, 15, and $20^{\circ}C$ during night time and ventilation temperature point during day time set $27^{\circ}C$. Depending on night air temperature, plant height, leaf area, fresh and dry weight of each organ, leaf, stem, and root were changed. Condition of high night temperature resulted in promotion of tomatoes growth with high dry weight and fresh weight. However, the dry weight under night temperature $20^{\circ}C$ decreased, especially, in 'Superdoterang'. On changes of yield, 'Rapito' showed higher productivity than 'Superdoterang' and the highest productivity point for nigh temperature is $13.32^{\circ}C$ for 'Superdoterang' and $14.25^{\circ}C$ for 'Rapito'. Although the total yield decreased from the point, the daily productivity increased with increasing night temperature, the highest point for nigh temperature is $14.45^{\circ}C$ for 'Superdoterang' and $16.46^{\circ}C$ for 'Rapito'. High temperature deceased the fruit weight and increased total soluble solid content in fruits. It is concluded that the night air temperature changes productivity of tomato and the temperatures between productivity and growth velocity have differences depending on different cultivars. scores than the other beef jerky samples (p<0.05).