• 한국대기환경학회지
• /
• 제17권1호
• /
• pp.97-104
• /
• 2001

Decomposition of trichloroethlyene(TCE) in electron beam irradiation was examined on order to obtain information on the treatment of VOC in air. Air containing vaporized TCE has been studied in a flow reactor with different reaction environments, at various initial TCE concentration and in the presence and absence of water vapor. Maximum decomposition was observed in oxygen reaction environment and the degree of decomposition was about 99% at 20kGy for 2,000ppm initial TCE. The concentration of TCE exponentially decreased with dose in air and pure oxygen. The effect of water vapor on TCE decomposition efficiency was examined. The decomposition rate of TCE in the presence of water vapor (5,600 ppm) was approximately 10% higher than that in the absence of water vapor. Dichloroacetic acid, dichloroacethyl chloride and dichloroethyl ester acid were identified as primary products of this reaction adn were decomposed and oxidized to yield CO and $CO_2$. Perchloroethylene, hexachloroethane, chloroform and carbon tetrachloride were also observed as highly chlorinat-ed by products.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.93-94
• /
• 2001

80여일 운전 후 수분함량은 상부 (53%) 보다 하부 (66%) 가 다소 높게 나왔다. 34 일의 적응기가 나타났으며 34일 경과 후 VOC의 분해율은 90% 에 이르렀다. 총 세균수 측정 결과, 37일 운전 후 총개체수는 $25^{\circ}C$에서 $1.08{\times}10^8$ cells/g 로 최고치를 기록하였다. 9가지 휘발성 유기화합물의 성분별 제거는 isoprene($95{\sim}99%$)과 m-xylene (93%)의 제거율이 가장 높았으며, chloroform (62%)이 가장 낮은 제거율을 보였다.

• 시스템엔지니어링학술지
• /
• 제5권2호
• /
• pp.1-9
• /
• 2009

This paper proposes an effective method on the DFILS(Design for Integrated Logistics Support) in ammunition development applying QFD(Quality Function Deployment) method. The goal of this research is to define the Design for ILS approach at the start of the ammunition development and to yield a set of reusable requirements. Based on 000mm High-Explosive(Warship ammunition) development work, a QFD software tool, CUPID, was used to analyze and define the field force's requirements. Additionally, a set of reusable requirements are identified and defined for use during the Design for ILS development phase in the next-generation ammunition development process. These set of requirements that consider both the priority and importance of the VOC(Voice of Customer) will contribute to the early phase of the ammunition development to implement the Design for ILS specialty engineering effort.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.187-188
• /
• 2001

도시와 산업의 발달 및 인구의 도시 집중화로 다양한 종류의 오염물질이 다량으로 대기 중으로 배출되는 등 환경오염이 사회의 중요한 문제로 부각되고 있다. 특히 대기 중 10 $\mu\textrm{m}$ 이하의 미세입자들은 10~60 % 정도가 기도를 지나 폐까지 침투하여 폐포에 침착되기 때문에 인체에 해를 끼칠 수도 있다(Chow et al., 1996). 또한 월드컵 개최 1년여를 앞두고 환경부에서 차량 부제시행, 배출업소 가동율 조정등 대기오염 저감을 위한 대책의 시행효과, 문제점 등을 파악하여 대책을 보완하기 위해 5월 25일부터 6월 25일까지 1개월 동안 예행연습을 실시하였다. (중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.65.2-65.2
• /
• 2011

일반적으로 결정질 실리콘 태양전지에서는 junction depth가 얕아짐으로써 단파장 영역에서의 수집효율이 향상되고 Jsc가 상승하기 때문에 junction depth가 얕은 것이 좋다. 또, 태양전지의 효율을 높이기 위해서는 낮은 재결합 속도가 필요한데 이를 위해서도 얕은 junction depth가 필요하다. 하지만 junction depth가 너무 얕으면 FF와 Voc가 낮아져 효율이 떨어지므로 junction depth를 최적화 할 필요가 있다. 본 논문에서는 PC1D 시뮬레이션을 사용하여 표면 농도를 고정시키고 junction depth를 가변하면서 이에 따른 cell의 parameter변화를 관찰하였다. 그 결과, 면저항 $120{\Omega}/{\square}$에서부터 효율이 saturation되었고, 그에 따른 parameter 값은 FF=76.28%, Jsc=$38.17mA/cm^2$, Voc=596.5V이며 junction depth가 $0.1726{\mu}m$일 때 효율은 17.37%이다.

• 한국환경과학회지
• /
• 제18권5호
• /
• pp.517-525
• /
• 2009

We measured ambient concentrations of hazardous air pollutants such as volatile organic compounds (VOCs) and aldehydes in residential areas nearby small and medium scale shipbuilding companies. The VOC concentrations were higher during the normal operation periods than vacation at which almost all operations were shutdown. Concentrations of VOCs was higher, as the sampling site was nearer from shipbuilding companies. The major components of VOCs were m,p-xylene, ethylbenzene, o-xylene, toluene, and 1,3,5-trimethylbenzene which had been found as major VOC compounds emitted from painting processes of shipbuilding in the previous studies. The major components of aldehydes analyzed were benzaldehyde, acrolein, formaldehyde, and acetaldehyde. The concentration of aldehydes was highest at the furthest sampling point from shipbuilding companies because the formation of aldehyde compounds could be occurred by the secondary chemical reactions of VOCs. The results of this study shows a proper counterplan need to be established for the reduction of hazardous air pollutants emitted from small and medium scale shipping companies.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.362-367
• /
• 1999

We intended to make the activated carbon fibers which could separate, remove and recover the volatile organic compounds of benzene, toluene, acetone and methanol. Changing activation temperature and time, large specific surface area and narrow pore distribution could be obtained. The activated carbon fibers have large adsorption capacity and selectivility for those organic compounds. We characterized the adsorption capability of the activated carbon fibers for benzene, toluene, acetone and methanol by BET specific surface area and pore size and micropore volume measurements. In the result of activation, the maximum value of BET specific surface area of the fibers was $1100\m^2$/g at $800^{\circ}C$ for 60 minutes and $K_2$O was reduced actively in this condition. Their average pore size was 5.8~5.9$\AA$. The activated carbon fibers prepared in this work had high adsorption rate to saturation and the selectibility for the above organic compounds. The adsorbed amount of acetone and methanol(diameter of$ 4.3\AA$ and $4.4\AA$ respectively) which are smaller than micropore diameter in size was 43~49%, which was larger value than benzene and toluene(in the same diameter as $5.9\AA$).

• 한국대기환경학회지
• /
• 제32권2호
• /
• pp.167-175
• /
• 2016

In this study, we estimate air pollutants emission from agricultural waste burning. We investigated activities related to agricultural waste burning such as crop burning rates, location, and time by region. The average crop burning rates per square meter farmland of fruits, pulses, barleys, cereals, vegetables, and special crops were $273.1g/m^2$, $105.7g/m^2$, $7.4g/m^2$, $121.0g/m^2$, $290.7g/m^2$, and $392.9g/m^2$, respectively. We estimated air pollutants emissions with pre-developed emission factors. The estimated air pollutant emission of agricultural biomass burning were CO 148,028 ton/year, $NO_x$ 5,220 ton/year, $SO_x$ 11 ton/year, VOC 59,767 ton/year, TSP 21,548 ton/year, $PM_{10}$ 8,909 ton/year, $PM_{2.5}$ 7,405 ton/year, and $NH_3$ 5 ton/year. When these results compared with the entire emissions of national inventory (CAPSS), CO, VOC, $PM_{10}$ account for about 17.8%, 6.2%, 6.7% of the total, respectively.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.80-86
• /
• 2013

본 연구에서는 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템을 활용하여 악취 가스인 황화수소 및 휘발성유기화합물(VOC)인 에탄올 및 톨루엔이 함유된 폐가스처리를 수행하고, 그 연구결과를 상용 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템을 활용한 연구결과와 비교 및 평가하였다. 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템의 경우는 1단계 운전에서 에탄올 및 톨루엔의 제거율은 각각 80% 및 20% 값을 계속 유지하였으나, 에탄올의 제거율은 톨루엔과 다르게 점점 떨어져서 1단계 끝에는 제거율 40% 값을 보였다. 한편 황화수소의 제거율은 100%에서 90%로 감소하였다. 에탄올의 제거율은 2단계 운전에서 10% 값을 보여서 더욱 감소하였으나, 황화수소 및 톨루엔 제거효율은 처리대상 폐가스의 톨루엔 부하가 4배로 급격히 증가하였음에도 불구하고 제거효율이 각각 90% 및 20% 값을 그대로 유지하였다. 3단계 운전은 알루미늄 코팅된 반사막필름을 광촉매반응기에 사용한 결과로서, 에탄올 및 톨루엔의 제거율은 각각 약 5%가 증가한 15% 및 25%의 제거율을 보였다. 한편 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템의 에탄올, 황화수소 및 톨루엔 제거율은 1단계 운전에서 각각 10%, 97% 및 100% 값을 유지하였다. 그러나 2단계 운전에서 에탄올, 황화수소 및 톨루엔 제거율은 각각 5%, 95% 및 2~3% 미만의 제거율을 보여서 에탄올과 황화수소는 제거율이 약간 저하되었으나 톨루엔의 경우에는 완전 제거에서 급락하였다. 또한 에탄올, 황화수소 및 톨루엔 모든 경우에서 반사막필름의 효과를 전혀 보지 못하였다. 따라서 상용 광촉매담지 부직포필터 카트리지를 장착한 광촉매반응기시스템에서 에탄올, 황화수소 및 톨루엔 제거는 부직포필터의 혐수성 VOC에 대한 흡착능에 주로 기인하였고, 광촉매 활성에 의한 제거는 광촉매담지 실리카담체 카트리지를 장착한 광촉매반응기시스템보다 훨씬 미미하였다.

• 상하수도학회지
• /
• 제33권1호
• /
• pp.31-41
• /
• 2019

Volatile organic compounds(VOCs) are toxic carcinogenic compounds found in wastewater. VOCs require rapid removal because they are easily volatilized during wastewater treatment. Electrochemical advanced oxidation processes(EAOPs) are considered efficient for VOC removal, based on their fast and versatile anodic electrochemical oxidation of pollutants. Many studies have reported the efficiency of removal of various types of pollutants using different anodes, but few studies have examined volatilization of VOCs during EAOPs. This study examined the removal efficiency for VOCs (chloroform, benzene, trichloroethylene and toluene) by oxidization and volatilization under a static stirred, aerated condition and an EAOP to compare the volatility of each compound. The removal efficiency of the optimum anode was determined by comparing the smallest volatilization ratio and the largest oxidization ratio for four different dimensionally stable anodes(DSA): Pt/Ti, $IrO_2/Ti$, $IrO_2/Ti$, and $IrO_2-Ru-Pd/Ti$. EAOP was operated under same current density ($25mA/cm^2$) and electrolyte concentration (0.05 M, as NaCl). The high volatility of the VOCs resulted in removal of more than 90% within 30 min under aerated conditions. For EAOP, the $IrO_2-Ru/Ti$ anode exhibited the highest VOC removal efficiency, at over 98% in 1 h, and the lowest VOC volatilization (less than 5%). Chloroform was the most recalcitrant VOC due to its high volatility and chemical stability, but it was oxidized 99.2% by $IrO_2-Ru/Ti$, 90.2% by $IrO_2-Ru-Pd/Ti$, 78% by $IrO_2/Ti$, and 75.4% by Pt/Ti anodes The oxidation and volatilization ratios of the VOCs indicate that the $IrO_2-Ru/Ti$ anode has superior electrochemical properties for VOC treatment due to its rapid oxidation process and its prevention of bubbling and volatilization of VOCs.