• 청정기술
• /
• 제10권2호
• /
• pp.61-72
• /
• 2004

본 연구에서는 물성, 세정성, 헹굼액의 유수분리성을 고려하여 유기용매의 종류 및 함량, 계면활성제의 종류 및 함량, 부조계면활성제/계면활성제 (cosurfactant/surfactant, A/S) 비율 등의 변수로 하여 수계/준수계 세정제를 개발하였다. 개발된 세정제들은 대부분 평균 액적크기가 10 ~ 20 nm의 미세 나노입자를 형성 하였으며, 30.2~32.5 dyne/cm의 낮은 표면장력과 낮은 점도 값을 보여 주었다. 플럭스에 대한 용해력은 계면활성제의 소수성이 증가할수록 높게 나타났으며 terpene을 함유한 세정제들이 hydrocarbon 함유 세정제와 대응 시판세정제에 비해 우수한 용해력을 보여 terpene계 세정제가 대체세정제로의 적합성을 보여주었다. 또한, 개발된 세정제들을 함유한 헹굼액은 시판세정제에 비하여 우수한 유수분리성을 보여 헹굼액의 재활용이 가능하여 경제적인 부담과 수질오염을 줄일 수 있음을 보여주었다. 그리고 이렇게 개발된 세정제를 L 전자 회사의 전자부품 생산라인 SMT(surface mount technology) 세정공정에 적용시켜 보았다. 그 결과 solder cream 제거에 있어서 에탄올, 이소프로필알콜(IPA), glycol ether과 같은 물질이 함유된 기존의 세정제에 비하여 세정성능이 2 배이상 향상되었고 생산현장에서 악취와 VOC의 문제를 해결시킬 수 있었다.

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1109-1116
• /
• 2002

본 연구는 제지류를 소각 처리할 때 발생하는 각종 휘발성 유기화합물에 대한 배출농도를 분석하였다. 실험대상으로는 일상생활에서 다양한 용도로 사용되는 제지류를 A4용지류 (A4 새종이, A4 잉크젯, A4레이져), 신문용지류 (콩기름 신문, 일반 신문), 포장용 Box지, 서류봉투류, 일회용 종이컵류, 화장지류로 분류하였고, 분류된 제지류의 수분함량과 소각시 발생하는 휘발성 유기화합물농도와 소각 재 함량을 분석하였다. 제지류 소각시 발생되는 휘발성 유기화합물을 Furan계, Aldehyde계, Aromatic계, Aliphatic Alkene계, Aliphatic Alkane계, Chlorine계, Ketone계로 분류할 때 가장 많이 발생하는 VOCs로는 Furan계로서 전체 배출농도의 57.4%였고, 그 다음으로 Aromatic계 (22.8%), Aliphatic Alkene계 (14.9%)의 순으로 놀은 평균농도를 나타냈다. 발생되는 휘발성 유기화합물 중 이중 결합을 포함하는 화합물 (Aromatic계, Aliphatic Alkene계, Ketone 및 Aldehyde계)틀의 상대적인 배출비중은 전체 배출농도에 대해 약 40.8%로써, 제지류의 소각에서 발생되는 휘발성 유기화합물의 40% 이상이 대기 중의 오존, 광화적 산화물 및 스모그의 전구체로써 작용할 수도 있을 것이다. 연구 사용된 전체 혼합 제지류 소각시 휘발성 유기화합물중 대표적인 발암성 물질인 Benzene, dichlorornethane, chloroform도 각각 60.5 ug/g, 0.8 ug/g 및 0.1 ug/g 정도 발생될 수 있음을 볼 수 있었다. 따라서, 소형 소각로에서의 제지류의 소각시 상당량의 발암성물질도 배출되므로, 소형 소각로에서도 적절한 VOCs의 제어장치가 꼭 필요한 것으로 판단된다. 본 연구에서 사용된 10가지의 제지류가 가지고 있는 평균 수분함량은 7.2% 정도로써 일반적인 도시폐기물의 제지류 수분함량 (4.5~10%)에 속하는 결과를 보였으며, 평균 9.0 %의 소각잔재 (BottomAsh) 함유량을 보였다. 이러한 결과는 제지류를 소형 소각로에서 소각시 유해 휘발성유기화합물의 발생에도 불구하고, 적절한 대기오염 방지시설을 설치한다면 소각처리가 폐기물 부피감소 측면으로는 상당한 경제적 타당성을 가지고 있음을 암시한다.

• 한국환경보건학회지
• /
• 제50권1호
• /
• pp.25-35
• /
• 2024

Background: There are concerns about the health effects of various environmental pollution exposures among residents living near coal-fired power plants (CFPP). Objectives: This study attempted to compare the concentrations of heavy metals in blood and urine and those of urinary volatile organic compound (VOC) metabolites according to the residential separation distance. Methods: Participants in the study totaled 334 people who have lived for more than 10 years in areas within 10 km of a CFPP. The separation distance was analyzed in quartiles by dividing it into Q1 (88 people), Q2 (89 people), Q3 (89 people), and Q4 (68 people). We explained the purpose of this study to the participants and collected blood and urine after obtaining signatures on a participation agreement. Results: The study participants were 102 males (30.5%) and 232 females (69.5%), with an average age of 71. The average length of residence and distance were 43.8 years and 4,800 meters. The geometric mean concentrations of Pb, Cd, and Hg in blood and As and Cd in urine were respective 1.35 ㎍/dL, 1.43 ㎍/L, 3.16 ㎍/L. They were 167.88 ㎍/g for creatinine and 1.58 ㎍/g creatinine. The metabolite concentrations of VOCs were 50.67 ㎍/g creatinine in t, t-muconic acid (t, t-MA), 10.73 ㎍/g creatinine in benzyl mercapturic acid, 317.05 ㎍/g creatinine in phenylglyoxylic acid, 123.55 ㎍/g creatinine in methylhippuric acid, and 190.82 ㎍/g creatinine in mandelic acid. The concentration of Pb in the blood and Cd and t, t-MA in the urine of residents within affected area of the CFPP showed statistically significant differences among distance groups. Conclusions: The concentration of urinary VOCs metabolites, especially t, t-MA, differed according to the distance groups of residents within the affected area of CFPP (p<0.05).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.69.2-69.2
• /
• 2010

Recently, bulk hetero-junction cells have been extensively studied by many researchers. Most of these cells were fabricated by spin coater. However, the spin coating process is not favorable to the large-scaled industry because it is not compatible with roll-to-roll process. One of the alternative methods is Doctor blading. In this study, we fabricated large OPV cells having total area of $100cm^2$. The buffer layer was Poly-(3,4-ethylenedioxythiophene) : poly-(styrenesulfonate) aqueous dispersion (PEDOT:PSS) and the active material is poly (3-hexythiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) blend in the solvent of Chlorobenzene. All of the organic layers were coated by dragging the blade with a speed of 5~20 mm/s on the stage with a temperature of $50^{\circ}C$. As-bladed PEDOT:PSS layer was baked at $120^{\circ}C$ for 10 minutes to eliminate the water. The cell structure is patterned ITO substrate/PEDOT:PSS/P3HT:PCBM/LiF/Al. The topmost electrode, LiF/Al, was deposited by thermal evaporation. After depositing electrode, and the cell was annealed at $150^{\circ}C$ for 30 minutes. The measured ISC, VOC, fill factor, and PCE were 2.95 A, 5.86 V, 0.32, and 0.78%, respectively. PCE was quite low but the large active area could be obtained successfully.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.599-610
• /
• 2011

Emission of air pollutants such as nitrogen oxides ($NO_x$), hydrocarbons (HC), $SO_2$, and particulate matter (PM) and $CO_2$ from ship during 2009 in Busan port was estimated based on activity-based method. The significant fraction (> 50%) of ship emission resulted from container and general cargo ships. Emission at port operation mode was the most dominant compared to at sea and maneuvering modes. Emission at North port was the largest source of air pollutants among ports. The magnitudes of air pollutants $NO_x$, $SO_2$, HC, $CO_2$, and PM in Busan port were $8.7{\times}10^3$, $8.23{\times}10^3$, $0.35{\times}10^3$, $4.86{\times}10^6$, and $0.67{\times}10^3$ ton/yr, respectively. The ratio of $NO_x$ to VOC is about 25. Our ship emission estimate is 2 times higher than that in CAPSS emission inventory.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• 센서학회지
• /
• 제20권5호
• /
• pp.305-310
• /
• 2011

This study focuses on the fabrication of $TiO_2$ nanosheets and their gas sensor application. A simple sonochemical method is employed to fabricate the $TiO_2$ nanosheets. The obtained samples were investigated by transmission electron microscope(TEM) and X-ray Diffraction(XRD). The $TiO_2$ nanosheets were coated on substrates by a dropping method followed by heat treatment. The sensor responses to volatile organic compounds(VOCs) such as toluene, benzene, ethanol and acetaldehyde were studied. It was found that the $TiO_2$ nanosheets sensors are able to detect ppb-levels of VOC gases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.687-690
• /
• 2004

Fabrication and characterization of dye-sensitized TiO2 solar cells(DSSC) consisting of spray-coated TiO2 electrode, an electrolyte containing I-/I3- redox couple, and a Pt-coated counter electrode carried out, using mainly FE-SEM and solar simulator. Also, effect of rapid thermal annealing(RTA) temperatue on I-V curves of DSSCS consisting of approximately 10m thickness and $5{\times}5mm2$ active area. No significant difference in the apparent size of TiO2 clusters was observed with increasing RTA temperature. Also, an open circuit voltage(Voc) of approximately 0.70V and a short-circuit photocurrent(Jsc) of 8 to 12mA/cm2 were observed in the TiO2 solar cell. With increasing RTA temperature upto 550oC, photocurrent density of dye-sensitized solar cells was enhanced, leading to enhancing the efficiency of dye-sensitized solar cells having Pt-electroplated counter electrode.

• 한국환경보건학회지
• /
• 제40권6호
• /
• pp.477-483
• /
• 2014

Objectives: This study was carried out to investigate the characteristics of odors emitted from sewage in a sanitary sewer and its outlets. Methods: The concentration of mal-odorous sulfur was analyzed by gas chromatograph, and odor intensity was estimated by an on-site sensory test. Odor intensity calculated from instrumental analysis results was compared with odor intensity observed at field. Results: As a results, the concentration of $H_2S$ ranged from 2.4 ppb to 5,889 ppb (average 703 ppb), while $CH_3SH$, $(CH_3)_2S$, and $(CH_3)_2S_2$ showed from 10 ppb to 554 ppb (average 119 ppb) and from 20 ppb to 332 ppb (average 70 ppb) and from 2.7 ppb to 8.1 ppb (average 5 ppb) individually. Average odor intensity observed in the field was degree three. Odor intensity calculated from sulfur compound concentration was confirmed as similar to the observed odor intensity because the coefficient of variance between the observed and the calculated intensities was less than one. Conclusion: It was expected that the results of this study will be helpful to design a deodorizing device to reduce odor emissions from sewerage facilities in the future.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.55-58
• /
• 2003

The ambient concentrations of benzene, toluene, and $\alpha$-/$\beta$-pinene were measured from July, 2002 to August, 2002 at the Gumsung mountain site in Jeonnam province. The mean concentration of benzene for this study was $62.6{\pm}43.9$ pptv (Min. 20.4 ~ Max. 151.2 pptv) , and that of toluene was 619.8 ${\pm}$ 330.2pptv (264.8~1, 386pptv). It was observed that the concentrations of $\alpha$ -pinene and $\beta$ -pinene were $169.0{\pm}97.7$ pptv (72.9~396.1pptv) and $11.2{\pm}27.9$pptv (7.5 ~95.9 pptv) , respectively. The ambient concentrations of aromatic and natural VOCs were found at the pptv level. In this study, the toluenelbenzene ratios were $13.9{\pm}11.2$ , but they were a little higher than those found in the domestic study and approximately 5 times greater than the values in the foreign study. The $\beta$ -/ $\alpha$ -pinene ratios ranged between 0.05 and 0.55, and this range was found to be similar in the foreign study.