• Biodesign
• /
• v.5 no.3
• /
• pp.122-125
• /
• 2017

Receptor for advanced glycation end products (RAGE) is one of the single transmembrane domain containing receptors and causes various inflammatory diseases including diabetes and atherosclerosis. RAGE extracellular domain has three consecutive IgG-like domains (V-C₁-C₂ domain) which interact with various soluble ligands including heparan sulfate or HMGB1. Studies have shown that each ligand induces different oligomeric forms of RAGE which results in a ligand-specific signal transduction. The structure of mouse RAGE bound to heparan sulfate has been previously determined but the electron density map of heparan sulfate was too ambiguous that the exact position of heparin sulfate could not be defined. Furthermore, the complex structure of human RAGE and heparin sulfate still remains elusive. Therefore, to determine the structure, human RAGE was overexpressed using bacterial expression system and crystallized using the sitting drop method in the condition of 0.1 M sodium acetate trihydrate pH 4.6, 8 % (w/v) polyethylene glycol 4,000 at 290 K. The crystal diffracted to 3.6 Å resolution and the space group is C121 with unit cell parameters a= 206.04 Å, b= 68.64 Å, c= 98.73 Å, α= 90.00°, β= 90.62°, γ= 90.00°.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.1
• /
• pp.74-81
• /
• 2010

The effects of different levels of natural clay enterosorbent on the growth, nutrient availability, and genital organs of post-weaning female pigs fed with an addition of zearalenone (ZEA) were investigated in the study. A total of thirty-five post-weaning gilts ($L{\times}Y{\times}D$) with an average body weight of 12.36${\pm}$1.46 kg were used in the test. The gilts were raised individually in metabolism cages and fed a corn-soybean meal-whey basal diet with an addition of 0 or 1 mg/kg of ZEA for 24 d with four levels of natural clay enterosorbent added in the feed. The treatments were: i) control; ii) control+2.5 g/kg clay; iii) control+1 mg/kg ZEA; iv) control+1 mg/kg ZEA+1.25 g/kg clay; v) control+1 mg/kg ZEA+2.5 g/kg clay; vi) control+1 mg/kg ZEA+5.0 g/kg clay; vii) control+1 mg/kg ZEA +10 g/kg clay. Pigs fed diets contaminated with additional purified ZEA had significantly reduced apparent digestibility of crude protein (CP), gross energy (GE) and apparent metabolic rate of GE (ME/GE, p<0.05) without changes of net protein utilization (NPU, p>0.05). Final body weight, average daily gain (ADG), average daily feed intake (ADFI), vulva length, vulva width, vulva area, relative weights of genital organ and proliferative changes of the ovary tissues in gilts fed ZEA-contaminated diet were increased (p<0.05) compared to the gilts fed the control diet. Addition of natural clay enterosorbent in the ZEA-contaminated diet showed a positive protection effect on ZEA feeding, and the protection was increased linearly or quadratically as clay content increased. However, in pigs fed a diet with clay alone at 2.5 g/kg level there was no significant impact (p>0.05) on all the parameters as compared to the control. It is suggested that feeding ZEA at about 1.0 mg/kg for 24 days might result in a deleterious effect in pigs, and addition of 5 or 10 g clay enterosorbent per kg diet can effectively neutralize the detrimental effects of the ZEA feeding.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.246-252
• /
• 2010

In order to improve the availability of phytase and probiotics together, a phytase gene from Aspergillus ficuum has been expressed in Lactobacillus. In this study, the transformed Lactobacillus with phytase gene was fed to pigs to determine its effect on pig production, feed conversion and gut microbes. Forty eight, 60-day-old, castrated pigs (Duroc${\times}$Landrace${\times}$Pietrain) were assigned to 6 groups, 8 pigs for each group. Group 1 was the control, group 2 was added with chlortetracycline (500 mg/kg), group 3 was added with the transformed Lactobacillus (500 mg/kg) with 20% (w/w) of calcium monohydrogen phosphate (CMP, $CaHPO_{4}$) removed, group 4 was added with the natural Lactobacillus (500 mg/kg) with 20% (w/w) of CMP removed, group 5 was added with the transformed Lactobacillus (500 mg/kg) with 40% (w/w) of CMP removed, group 6 was added with phytase (500 mg/kg) with 40% (w/w) of CMP removed. The results showed: i) the average daily gain (ADG) was improved in groups 2, 3 and 4 (p<0.05); ii) the diarrhea rates in the groups added with Lactobacillus were lower than in the other groups (p<0.05), in which the transformed Lactobacillus had more effect on reducing digestive disease; iii) the transformed Lactobacillus was most effective in improving the digestibilities of crude protein (CP), calcium (Ca), phosphorus (P), compared with the other groups (p<0.05); iv) Lactobacillus could increase lactic acid bacterium number and ammonia concentrations, and decrease pH values and E. coli number in pig feces (p<0.05); v) the phytase activity in the feces of pigs fed with the transformed Lactobacillus was 133.32 U/g, which was higher than in group 4 (9.58 U/g, p<0.05), and was almost the same as group 6 (135.94 U/g); vi) the transformed Lactobacillus could increase serum concentrations of IgA, triglyceride, and glutamic oxaloacetic transaminase activity (p<0.05), and had no significant effect on other serum indexes (p>0.05).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.637-644
• /
• 1998

[ $\beta$ ]-Galactosidase was extracted from the internal organ of sea urchin, Hemicentrotus pulcherrimus The enzyme was purified 384.6-fold over the crude extract by the sequential chromatographic methods including DEAE-Sephadex A-25, CM-Cellulose, and Con A-Sepharose 4B affinity chromatography with a recovery $1.26\%$. The molecular weight of the purified enzyme was estimated approximately 94 kDa as monomeric term by SDS-PAGE and Sephadex G-150 gel chromatography. The maximum enzymatic activity was observed at pH 3.0 and $50^{\circ}C$ but the one was stable over the ph range or 3.0$\~$5.0 and below $37^{\circ}C$. The $K_m$ and $V_{max}$ values against PNPG (P-nitrophenyl $\beta$-D-galactopyranoside) were 15.0 mM and 214 $\mu$mole/min per mg protein, respectively. The enzymatic activity was activated by $Ba^{2+}$, but significantly inhibited by $DEP,\;Hg^{2+},\;Sn^{2+}$ and galactose.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.143-146
• /
• 1998

The $LiCoO_2$ powder was synthesized at >$700^{\circ}C$, >$850^{\circ}C$ by solution route. In this paper, we investigated X-ray diffraction, and charge-discharge performance for $LiCoO_2$/Li and $LiCoO_2$/MPCF cell. The $LiCoO_2$/Li ceSl exhibited a high avmge discharge potential of 38-3% and a good cycle life performance at 5(hnA/g during chargedischarge cycling between 43-3.0V. And, the $LiCoO_2$MPCF cell showed a high average discharge voltage of 3.6-3.W and a excellent cycle life prfomam during chargedischarge cycling b&wm 4 2-2.W. As a result, the $LiCoO_2$ powdm syd-eizd by solution route is a good cathode material for lithium ion secondary battery.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.1-11
• /
• 2005

The stoichiometric mixture of evaporating materials for the $CuInSe_2$ single crystal thin film was prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuInSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.783\;{\AA}$ and $11.621\;{\AA}$, respectively. To obtain the $CuInSe_2$ single crystal thin film, $CuInSe_2$ mixed crystal was deposited on throughly etched GaAs(100) by the HWE(Hot Wall Epitaxy) system. The source and substrate temperature were $620^{\circ}C$ and $410^{\circ}C$ respectively. The crystalline structure of $CuInSe_2$ single crystal thin film was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of Van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by impurity scattering in the temperature range 30 K to 100 K and by lattice scattering in the temperature range 100 K to 293 K. The temperature dependence of the energy band gap of the $CuInSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=1.1851\;eV-(8.99{\times}10^{-4}\;eV/K)T^2/(T+153\;K)$. The open-circuit voltage, short current density, fill factor, and conversion efficiency of $n-CdS/p-CuGaSe_2$ heterojunction solar cells under $80\;mW/cm^2$ illumination were found to be 0.51V, $29.3\;mA/cm^2$, 0.76 and 14.3 %, respectively.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2828-2834
• /
• 2024

This research intends to recycle bone and incorporate it into concrete for radiation shielding application using Phy-X/PSD software. Cement, sand and granite were mixed in proportion of 0.5 kg:1 kg:1 kg to obtain sample A. Other concretes composing of cement, sand, granite and bone ash was in proportion 0.45 kg:1 kg:1 kg:0.05 kg, 0.1 kg:1 kg:1 kg:0.4 kg and 0.35 kg:1 kg:1 kg:0.15 kg to obtain samples B, C and D respectively. 0.5 water-to-cement (W/C) ratio was adopted throughout the mixes because the control mix contain the normal water quantity for normal hydration of cement. Replacing the bone ash for the cement in the fabricated concretes enhances their densities where the fabricated concretes' density decreased from 2.33 g/cm³ to 2.22 g/cm³ by raising the reinforcing bones fly ash concentration from 0 to 0.15 kg. Additionally, increasing the bones fly ash concentration within the fabricated concretes increases their linear attenuation coefficient (LAC) where the fabricated concretes' μ values at 0.662 MeV reach 0.181 cm^-1, 0.178 cm^-1, 0.174 cm^-1, and 0.171 cm^-1, respectively for concretes A, B, C, and D. The use of other local materials is recommended, as it improves waste management being the major aim of the sustainable development goal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.307-314
• /
• 1986

Cu(II) binding mechanisms with water soluble organic fractions (WSOF) extracted from an agricultural soil (W), a soil treated with sludge for 6 years ($WS_6$), a sludge-soil mixture incubated for one week ($WS_1$), and sewage sludge (SS) were studied by electron spin resonance (ESR) spectroscopy and potentiometric titrations. Cu(II)-WSOF complexes produced $g_{11}$ values which were larger than $g_{\perp}$ values, indicating that the coordination of Cu(II) complex was an elongated octahedron. At liquid $N_2$ temperature (77K), the Cu(II)-W complex showed an anisotropic ESR spectrum while the Cu(II)-SS complex showed an isotropic spectrum. These spectral results suggest that the oxygen donor ligands of W may form relatively strong bonds with $Cu^{2+}$ due to extensive chelation while ligands of SS may form little or no chelate bonds with $Cu^{2+}$. The ESR spectra of Cu(II)-SS complex also suggest that each of four in-plane ligands (e.g., $COO^-$, $H_2O$, $Cl^-$, etc.) may act independently as monodentate ligands. Oxygen donor ligands such as aromatic carboxyl groups were probably the major Cu(II) binding sites in W. Sulfonate, aliphatic carboxyl group, and N-containing ligands were probably the major binding sites in SS at pH 5. The Cu(II) complexation with N-containing groups increased as sludge was added to the soil. Much higher (6x) pyridine concentrations were required to displace W from Cu(II)-W complex as compared to the Cu(II)-SS complex.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.83-83
• /
• 2017

생체재료의 표면은 이식과 동시에 생체계면의 역할을 하게 되어, 일련의 생물학적 반응이 시작되고 진행되는 중요한 장소가 된다. 초기에 생체계면에서 일어나는 단백질 흡착이나 염증반응을 비롯한 생물학적 반응들은 궁극적으로 임플란트의 성패를 좌우할 만큼 중요하다. 골융합을 개선하기 위한 다른 방법으로 생체불활성의 타이타늄 (Ti)과 골조직의 능동적인 반응을 이루기 위해 생체활성 표면을 부여함으로서 계면에서의 골형성 반응을 증진시키는 방법이 이용된다. 생체불활성의 Ti과 Ti합금은 골조직과 직접적인 결합을 이루지 못하므로, 골조직과의 반응을 향상하기 위해 여러 종류의 생체활성 재료를 코팅하는 방법이 연구되어 왔고, 이 중 생체의 변화와 가장 유사한 하이드록시아파타이트 코팅이 가장 대중적인 방법으로 사용되었으며 이는 초기 골형성을 촉진하는 것으로 알려졌다. 치과용 임플란트의 표면형상과 화학조성이 골 융합에 영향을 미치는 가장 중요한 인자이므로 최근의 연구동향은 이들 두 가지 표면특성을 결합함으로서 결과적으로 최적의 골세포반응을 유도하고, 골융합 후 골조직과의 micromechanical interlocking에 의해 임플란트의 안정성에 중요한 역할을 하는 마이크론 단위의 표면조도와 표면 구조를 유지하면서, 부가적으로 골 조직 반응을 능동적으로 개선할 수 있는 생체활성 성분을 부여하여 골 융합에 상승효과를 이루기 위한 표면처리법에 관해 많은 연구가 요구되어지고 있다. 따라서 골을 구하는 원소인 망간과 실리콘으로 치환된 하이드록시아파타이트를 플라즈마 전해 산화법으로 코팅하여 세포와 잘 결합할 수 있는 표면을 제공함으로써 골 융합과 치유기간을 단축시킬 수 있을 것으로 사료된다. 실험방법은 시편은 치과 임플란트 제작 합금인 Ti-6Al-4V ELI disk (grade 5, Timet Co., USA; diameter, 10 mm, thickness, 3 mm)이며, calcium acetate monohydrate, calcium glycerophosphate, manganese(II) acetate tetrahydrate, sodium metasilicate을 설계조건에 따라 혼합 제조된 전해질 용액을 이용하여 플라즈마 전해 산화법으로 표면 코팅을 실시하였다. 각 시편의 플라즈마 전해시 전압은 280V로 인가하였고, 전류밀도는 70mA로 정전류를 공급하여 해당 인가전압 도달 후 3분 동안 정전압 방식을 유지하였다. 코팅된 피막 표면을 주사전자현미경과 X-선 회절분석을 통하여 미세구조 및 결정상을 관찰하였다. 또한 코팅된 표면의 생체활성 평가는 정량적으로 평가하기 위해 동전위시험과 AC 임피던스를 통하여 시행하였다. 분극거동을 확인하기 위해 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하여 구강 내 환경과 유사한 $36.5{\pm}1^{\circ}C$의 0.9 wt.% NaCl에서 실시하였다. 전기화학적 부식 거동은 potentiodynamic 방법으로 조사하였고 인가전위는 -1500 mV에서 2000 mV까지 분당 1.67 mV/min 의 주사속도로 인가하여 시험을 수행하였다. 임피던스 측정은 potentiostat (Model PARSTAT 2273, EG&G, USA)을 이용하였으며, 측정에 사용한 주파수 영역은 10mHz ~ 100kHz 까지의 범위로 하여 조사하였고 ZSimWin(Princeton applied Research, USA) 소프트웨어를 사용하여 용액의 저항, 분극 저항 값을 산출하였다. 망간의 함량이 증가할수록 불규칙한 기공을 보였으며, 실리콘은 $TiO_2$ 산화막 형성을 저해하는 경향을 확인할 수 있었다. 단독으로 표면을 처리한 경우보다 두 가지 원소를 이용해 복합 표면처리를 시행한 경우가 내식성이 좋아 임플란트과의 골 유착에 긍정적인 영향을 미칠 것으로 사료된다.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.1
• /
• pp.95-105
• /
• 2020

In this study, iron nanoparticles impregnated hydrochar (FeNPs@HC) was synthesized using lignocellulosic waste and simple one-pot synthetic method. During hydrothermal carbonization (HTC) process, the mixture of lignocellulosic waste and ferric nitrate (0.1~0.5 M) as a precursor of iron nanoparticles was added and heated to 220℃ for 3 h in a teflon sealed autoclave, followed by calcination at 600℃ in N₂ atmosphere for 1 h. For the characterization of the as-prepared materials, X-ray diffraction (XRD), cation exchange capacity (CEC), fourier transform infrared spectrometer (FT-IR), Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), Energy Dispersive X-ray Spectroscopy (EDS) were used. The change of Fe(III) concentration in the feedstock influenced characteristics of produced FeNPs@HC and removal efficiency towards As(V) and Pb(II). According to the Langmuir isotherm test, maximum As(V) and Pb(II) adsorption capacity of Fe_0.25NPs@HC were found to be 11.81 and 116.28 mg/g respectively. The results of this study suggest that FeNPs@HC can be potentially used as an adsorbent or soil amendment for remediation of groundwater or soil contaminated with arsenic and cation heavy metals.