• Journal of Acupuncture Research
• /
• v.21 no.5
• /
• pp.179-190
• /
• 2004

Objectives : The purpose of this study was to investigate the effect of Bee Venom and Melittin acupuncture solution on the lipopolysaccharide and sodium nitroprusside- induced expression of cytosolic phospholipase $A_2$, tumor necrosis factor-${\alpha}$ and calcium concentration in RAW 264.7 cells, a murine macrophage cell line. Methods : The expression of cytosolic phospholipase $A_2$ and tumor necrosis factor-${\alpha}$ was determined by western blotting with corresponding antibodies, and the generation of intracellular calcium concentration was investigated by delta scan system in RAW 264.7 cells. Results : 1. Compared with control, expressions of lipopolysaccharide-induced cytosolic phospholipase $A_2$ were decreased significantly by $5{\mu}g/mL$ of bee venom and 5, $10{\mu}g/mL$ of melittin acupuncture solution and decreased by 0.5, $1{\mu}g/mL$ of bee venom. 2. Compared with control, expressions of sodium nitroprusside-induced phospholipase $A_2$ were decreased significantly by 0.5, 1, $5{\mu}g/mL$ of bee venom and by 5, $10{\mu}g/mL$ of melittin acupuncture solution. 3. Compared with control, expressions of lipopolysaccharide-induced tumor necrosis factor-${\alpha}$ were decreased significantly by $10{\mu}g/mL$ of melittin acupuncture solution and were not changed significantly by 0.5, 1, $5{\mu}g/mL$ of bee venom and $5{\mu}g/mL$ of melittin acupuncture solution. 4. Compared with control, expressions of sodium nitroprusside-induced tumor necrosis factor-${\alpha}$ were decreased significantly by 1, $5{\mu}g/mL$ of bee venom and 5, $10{\mu}g/mL$ of melittin acupuncture solution and decreased by $0.5{\mu}g/mL$ of bee venom 5. Compared with control, lipopolysaccharide-induced intracellular calcium concentrations were decreased by 0.5, 1, $5{\mu}g/mL$ of bee venom and $10{\mu}g/mL$ of melittin acupuncture solution and increased by $5{\mu}g/mL$ of melittin acupuncture solution. 6. Compared with control, sodium nitroprusside-induced intracellular calcium concentrations were decreased by 0.5, 1, $5{\mu}g/mL$ of bee venom and 5, $10{\mu}g/mL$ of melittin acupuncture solution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.140-145
• /
• 2002

The performances of a parallel current air driven type foam separator were evaluated in the pilot-scale recirculating aquaculture system. The system was stocked with Nile tilapia (Oreochromis niloticus) at an initial rearing densities of $2\%$, $5\%$ and $7\%$ of water volume of rearing tank and reared for 15, 30, 35 days, respectively. The condensated volume of effluent foam was increasing with increased rearing density. As increasing rearing density from $2\%$ to $7\%$, the protein concentration in rearing tank was increased from 16.6 g/$m^3$ to 21,9 g/$m^3$ and the removal amount of protein through foam separator as increased from 0.99 g/day to 2.5 g/day. But protein concentration ratio in the foam was decreased from 3.2 to 1.9. Changes of the removal amount and the concentration ratios of total suspended solid (TSS) and chemical oxygen demand (COD_cr.) were similar to proteins. The highest concentration ratios of TSS and COD_cr. were 10.2 and 8.4 at 2$2\%$ of rearing density.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1194-1203
• /
• 2000

A magnetic field exposure system that generates 60 Hz magnetic fields from 1 mG to 5 G was designed and constructed for small-sized animal study. In order to investigate as many animals as possible at one series of test, uniform magnetic fields are required at wide living area of the animals. In this article, a cubic shaped field exposure system with three animal living floors was designed, which offers about 50 seating capacity. For calculation of magnetic fields inside the cage, a three-dimensional calculation program was developed. Using this, optimum electric current ratio of inner coil to outer coil and position of each coil were determined. Meanwhile, inductance of the exposure system was calculated for the design of power supply. The field measurement results of the manufactured exposure system showed that the difference between maximum and minimum magnetic field at the testing floors was less than 3%, which strongly demonstrated the field exposure system was good for small sized animal study.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.278-280
• /
• 2002

We have cloned a hydromedusan opsin cDNA and showed that the deduced amino acid sequence of the cytoplasmic loop between helices 5 and 6 (loop 5-6) was clearly different from that reported so far. The amino acid sequence of the loop 5-6 is important on determination of the specificity for the coupled G- protein. To clarify which class of G-protein mediates the phototransduction system in the ocellus of the hydromedusan, we investigated G-proteins expressed in the ocellus. By PCR against the cDNA of the ocellus with primers designed according to the conserved amino acid sequence in G-protein a subunit, we obtained three kinds of cDNA fragments. Based on the sequence similarities, ttwo of them (JGI and JG3) were classified as $G_{i}$ and $G_{q}$, respectively. The other one (JG2) was a new subtype within $G_{*}$ class. Electron microscopic immunocytochemistry with the antiserum against the C-terminal sequence of $G_{q}$ or $G_{t}$ revealed the presence. of the both classes in the ocellus. The similarity of the C-terminal sequence of the JG2 with that of bovine $G_{t}$ suggests that the anti- $G_{t}$ antiserum would bind to JG2. These results suggest the possibility that the hydromedusan rhodopsin decides the specificity for the coupled G-protein by the other domain than the loop 5-6.oop 5-6.5-6.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.259-267
• /
• 1998

Typical characteristics of Mejus must be understood to get the basic data for setting up mass production system of traditional fermented soybean products. One hundred and twenty one Mejus were collected from various places and analyed. Most of shapes were rectangular and some were spherical, conical, cylindrical and doughnut types. The weight of Mejus was 0.4~4.2kg. Chemical analysis showed: moisture content, 9.73~58.22% ; pH, 4.95~8.15; acidity, 0.6~3.8% ; soluble protein content, 4.45~12.31%; soluble sugar content, 0.82~10.95%. Enzyme assay showed: $\alpha$-amylase activity, 5.0~874.2 units/g; $\beta$-amylase activity, 0.02~27.74units/g; acidic protease activity, 31.3~225.1unts/g; lipase activity 1.0~53.0units/g. Total viable cells were 3.72$\times$107~1.35$\times$1010cfu/g, and yeast and mold count 6.46$\times$104~8.91$\times$106cfu/g. respectively. $\alpha$-Amylase activity of a traditional Meju from Incheon showed the highest activity of 732.8 units/g(interior section) and 823.2units/g (exterior section). $\beta$-Amylase activity was the highest{3.57 units/g (interior sectin) and 4.25units/g (exterior section)} in Meju from Chunbuk. Acidic protease activity was the highest in sample from Seoul, whereas traditional Meju from Kyongnam showed the highest activity of 21.5units/g(interior section) and 37.5units/g(exterior sectin).

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.25-29
• /
• 2016

The high temperature superconducting (HTS) contra-rotating propulsion (CRP) systems comprise two coaxial propellers sited on behind the other and rotate in opposite directions. They have the hydrodynamic advantage of recovering the slipstream rotational energy which would otherwise be lost to a conventional single-screw system. However, the cooling systems used for HTS CRP system need a high cooling power enough to maintain a low temperature of 2G HTS material operating at liquid neon (LNe) temperature (24.5 - 27 K). In this paper, a single thermo-syphon cooling approach using a Gifford-McMahon (G-M) cryo-cooler is presented. First, an optimal thermal design of a 1.5 MW HTS motor was conducted varying to different types of commercial 2G HTS tapes. Then, a mono-cryogenic cooling system for an integration of two 1.5 MW HTS motors will be designed and analyzed. Finally, the 3D finite element analysis (FEA) simulation of thermal characteristics was also performed.

• Journal of Korean Port Research
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1996

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this, Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows: 1. Among those vessels called at Mokpo Port in 1994, 556 ships(2,736,669 G/T) are oceangoing while 8155 ships(2,587,217 G/T) are domestic. The average size of oceangoing vessels is 4,922,1 G/T, and the domestic is 317,8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165%. 2. The capacity of approaching channel is enough to handle the total traffic volume of 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 - No.5 is 4.5% and No.6 is 30% of 1993's. 5. The utilization rate of LLC(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.414-422
• /
• 1992

To keep up with urgent need of continuous, effective and rapid drying unit, a fluidized bed drying system with computer controlling air temperature, velocity and relative humidity was designed. This study was attempted to determine physical properties and some basic experiments of fluidized bed d교ing of barley. Also experimental data of the designed fluidized bed drying system using the barely were compared with those of published equations to confirm the reliability of the system and the following results were obtained. The physical dimension husked barley were shown larger than that of naked barley from the experiment. When air temperature. relative humidity and charged amount were $35^{\circ}C$, 30% and 300g respectively, the minimum fluidization velocity of naked and husked barley were found 1.5 m/s and 1.7 m/s. And the optimum fluidization velocity was shown as 3.0 m/s from the experiment. The empirical equation of $U_{mf}$ in this fluidized system was obtained as follow; $U_{mf}^2= \frac{{\phi_s}\;d_p}{Hk}\;{\cdot}\;\frac{(\rho_s-\rho_g)g\;{{\varepsilon}_{mf}^3}} {\rho_g}(Re_p>1,000)$ Where HK=0.4881 for naked barley, 0.6649 for husked barley.

• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.646-653
• /
• 2011

The combined system of sequencing batch biofilm reactor (SBBR) and membrane SBR (MSBR) was operated with sewage to evaluate the COD utilization for biological nutrient removal (BNR). The SBBR was operated for nitrification reactor, while denitrifying PAO (dPAO) was cultivated in MSBR with anaerobic-anoxic operation. In the SBBR and MSBR system, the enhanced biological phosphorus removal (EBPR) was successfully achieved with higher N removal. The COD utilization in combined SBBR-MSBR system was significantly reduced compared to ordinary BNR (up to 3.1 g SCOD/g (N+P) and 1.6 g SCOD/g (N+P) with different C/N/P ratio). The results suggest that a dPAO process could effectively reduce carbon energy (=COD) requirement. The combination of oxic-SBBR and anaerobic-anoxic MSBR for dPAO utilization could be an attractive alternative to upgrade the process performance in weak sewage.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.561-569
• /
• 2023

Furfural is a platform chemical that is produced from xylose, one of the hemicellulose components of lignocellulosic biomass. Furfural can be used as an important feedstock for phenolic compounds or biofuels. In this study, we compared and optimized the conditions for producing furfural from xylose in a batch system using two types of catalysts: sulfuric acid, which is commonly used in the furfural production process, and formic acid, which is an environmentally friendly catalyst. We investigated the effects of xylose initial concentration (10 g/L~100 g/L), reaction temperature (140~200 ℃), sulfuric acid catalyst (1~3 wt%), formic acid catalyst (5~10 wt%), and reaction time on the furfural yield. The optimal conditions according to the type of catalyst were as follows. For sulfuric acid catalyst, 3 wt% of catalyst concentration, 50 g/L of xylose initial concentration, 180 ℃ of temperature, and 10min of reaction time resulted in a maximum furfural yield of 59.0%. For formic acid catalyst, 5 wt% of catalyst concentration, 50 g/L of xylose initial concentration, 180 ℃ of temperature, and 150 min of reaction time resulted in a furfural yield of 65.3%.