• Journal of the military operations research society of Korea
• /
• v.24 no.1
• /
• pp.146-156
• /
• 1998

Cholesky factorization is known to be inefficient to problems with dense column and network problems in interior point methods. We use the conjugate gradient method and preconditioners to improve the convergence rate of the conjugate gradient method. Several preconditioners were applied to LPABO 5.1 and the results were compared with those of CPLEX 3.0. The conjugate gradient method shows to be more efficient than Cholesky factorization to problems with dense columns and network problems. The incomplete Cholesky factorization preconditioner shows to be the most efficient among the preconditioners.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2003

We suggest Bisection method, Fixed point method and Newton's method for finding the intersection point of a nonparametric surface and a line in $R^3$ and apply ray-tracing in Color Picture Tube or Color Display Tube.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.85-93
• /
• 2002

This study presented a new method for evaluating the coefficient of consolidation by using inflection point method which was based on the fact that time factor, T corresponding to the inflection point of a semi-logarithmic plot of a time curve is fixed and equals to T = 0.405 at 70.03% consolidation. In the proposed method, as the next load increment is applied as soon as the inflection point is confirmed, the time required to identify the inflection point can be shortened. Thus, the coefficient of consolidation may be easily evaluated. The time required to complete the testing using this rapid consolidation method could be as low as 0.5~9 hours compared with 1 or 2 weeks in the case of the conventional consolidation test. For this study, we designed settlement equipment for normalization of test samples. In test results, the factors of consolidation agreed with undisturbed samples results.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.661-671
• /
• 2011

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.

• Journal of Power Electronics
• /
• v.10 no.5
• /
• pp.528-537
• /
• 2010

A novel decision reference based method for the maximum power point tracking (MPPT) of PV arrays is presented in this paper. The proposed decision reference was derived from a simplified solar cell model. This method solves the problems of conventional MPPT algorithms, such as oscillation of the operating point at the steady state and confusion under rapidly changing insolation. It is shown by simulation and experimental results that the method properly tracks a rapidly changing insolation profile. The signal to noise ratio (SNR) of the new decision reference is also higher than those of conventional P&O and INC methods. An updating subroutine was included in the proposed MPPT algorithm to compensate for temperature and aging effects.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.144-152
• /
• 2019

According to the National Police Agency, point-to-point speed enforcement system is being installed and operated in 97 sections across the country. It is more effective than other enforcement systems in terms of stabilizing the traffic flow and inhibiting the kangaroo effect. But it is only 5.1% of the total enforcement systems. The National Police Agency is also aware that its operation ratio is very low and it is necessary to expand point-to-point speed enforcement system. Hence, this study aims to provide the expansion basis of the point-to-point speed enforcement operation through analysis of the quantitative effects and development the accident prediction model. Firstly, this study analyzed the effectiveness of point-to-point speed enforcement system. Naive before-after study and comparison group method(C-G Method) were used as methodologies of analyzing the effectiveness. The result of using the naive before-after study was significant. Total accidents, EPDOs and casualty crashes decreased by 42.15%, 70.64% and 45.30% respectively. And average speed and the ratio of exceeding speed limit decreased by 6.92% and 20.50%p respectively. Moreover, using the C-G method total accidents, EPDOs and casualty crashes decreased by 31.35%, 66.62% and 10.04% respectively. And average speed and the ratio of exceeding speed limit decreased by 3.49% and 56.65%p respectively. Secondly, this study developed a prediction model for the probability of casualty crash. It was dependant on factors of traffic volume, ratio of exceeding speed limit, ratio of heavy vehicle, ratio of curve section, and presence of point-to-point speed enforcement. Finally, this study selected the most danger sections to the major highway and evaluated proper installation sections to the recent installation section by applying the accident prediction model. The results of this study are expected to be useful in establishing the installation standards for the point-to-point speed enforcement system.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.317-326
• /
• 2007

We propose more enhanced heuristic for the GOSST(Grade of Services Steiner Minimum Tree) problem in this paper. GOSST problem is a variation of Steiner Tree problem and to find a network topology satisfying the G-Condition with minimum network construction cost. GOSST problem is known as one of NP-Hard or NP-Complete problems. In previous our research, we proposed a heuristic employing Direct Steiner Point Locating strategy with Distance Preferring MST building strategy. In this paper, we propose new Steiner point locating strategy, Zigzag Steiner point Locating strategy. Through the results of out experiments, we can assert this strategy is better than our previous works. The Distance Zigzag GOSST method which hires the Distance Preferring MST building strategy and Zigzag Steiner point Locating strategy defrays the least network construction cost and brings 31.5% cost saving by comparison to G-MST, the experimental control and 2.2% enhancement by comparison to the Distance Direct GOSST method, the best GOSST method in our previous research.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.65-71
• /
• 2024

In this study, we suggested a key-point detection method for robot harvesting of oriental melon. Our suggested method could be used to detect the detachment part and major composition of oriental melon. We defined four points (harvesting point, calyx, center, bottom) based on tomato with characteristics similar to those of oriental melon. The evaluation of estimated key-points was conducted by pixel error and PDK (percentage of detected key-point) index. Results showed that the average pixel error was 18.26 ± 16.62 for the x coordinate and 17.74 ± 18.07 for the y coordinate. Considering the resolution of raw images, these pixel errors were not expected to have a serious impact. The PDK score was found to be 89.5% PDK@0.5 on average. It was possible to estimate oriental melon specific key-point. As a result of this research, we believe that the proposed method can contribute to the application of harvesting robot system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.672-676
• /
• 2004

In this paper, measuring system of 5 DOF motion errors are proposed using two capacitive type sensor, a straight edge and a laser interfoerometer. Yawing error and pitching error are measured using the laser interferometer, and rolling error is measured by the reversal method using a capacitive type sensor. Linear motion errors of horizontal and vertical direction are measured using the sequential two point method. In this case, influence of angular motion errors is compensated using the previously measured angular motion errors. In the horizontal direction, measuring accuracy is within 0.05 $\mu$m and 0.27 arcsec, and in the vertical direction, it is within 0.15 $\mu$m and 0.5 arcsec. From these results, it is confirmed that the proposed measureing system is very effective to the measurement of 5 DOF motion errors in the ultra precision feed tables.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.532-541
• /
• 2001

Developments of nondestructive evaluation techniques for reduction of strength or toughness by aging of material have been carried out, and the method using electrical resistivity is one of them. In this study, to examine the application of electrical resistivity to the evaluation of degradation of metallic alloy, ten different non-magnetic materials were selected as test materials. Electrical resistivities measured by DC two-point probe method and those measured by non-contact type eddy current method were compared with each other. In addition, to examine the application possibility of four-point probe technology in field, the electrical resistivities for 1Cr-lMo-0.25V steel measured by DC two-point probe method and four-point probe method were compared with each other Differences between two measured values for the 1Cr-1Mo-0.25V steel were 0.6%. Therefore, the four-point probe method can be applied to the estimation of the degradation of metallic alloy. ect.